Question about Toys

1 Answer

Robosapien v2 bad motivator

We recently purchased the black and silver signature series V2 from Ebay. Looked like it had barely ever been used. It worked great until the first time we attempted the "lie down, sit, get up" sequence. Upon standing, it continued motion completely forward and face-planted. Saying "Bad Motivator". Now it remains in this position or totally backwards and will not rectify an upward position. It also will not respond to any of the other commands other then to fall into one of these two positions and repeat "Bad motivator" and "Stabilizer bolt engaged" only rarely does it say the second. We are really frustrated that this toy only functioned properly for about 30 minutes. Any suggestions?

Posted by on

  • Lori Gruber
    Lori Gruber Feb 08, 2014

    We have checked for the crumbling wires. Nothing appears out of order with wiring.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

I had the bad motivator problem when he was standing up, then he wouldnt turn on at all. i wasnt about to let my robot be returned, i took off the leg plates and found the problem"
wire covering confetti spilled out of the leg plate, the part where the wire cluster for the right leg goes into the leg from the hip had the charictaristics of being mangled by a dog, minus the slobber. the bad chinese wire batch plus the constand rubbing if the leg plate had cause the wires to be exposed and crossed with each other, i fixed it by sealing each wire in electrical tape and binding the whole cluster in zip ties, and putting the leg back on, he worked perfectly.
i just thought id post this information because the "bad motivator" problem and the crusty wire insulation problems may be linked. as it was for me.Hope This Helps.

Posted on Apr 30, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please, I am need manual mother board MSI G31M3-L V2. Obrigado!


http://www.msi.com/service/download/manual-8486.html


then select US


see page 1 of pdf document.


INTRODUCTION

Thank you for choosing the G31M3 V2 Series (MS-7529 v1.x) Micro-ATX mainboard. The

G31M3 V2 Series are based on Intel


® G31 & Intel® ICH7 chipsets for optimal system

efficiency. Designed to fit the advanced Intel


® CoreTM 2 Duo/ CoreTM 2 Quad/ Pentium

Dual-Core E2XXX and Celeron 4XXX/ Wolfdale Series LGA 775 processor, the G31M3 V2
Series deliver a high performance and professional desktop platform solution.

Apr 24, 2011 | MSI G31M3-L V2 Motherboard

1 Answer

Where do I purchase a left arm for a Robosapien V2 an how much will it cost?


You can order replacement or spare parts from the WowWee Online Store . Refer to the store inventory for available parts.
http://www.wowwee.com/
Here is the support link: http://www.wowwee.com/en/support/robosapien-v2

Feb 28, 2011 | Wowwee Toys

1 Answer

Just bought a used WowWee Robosapien Humoid Toy Robot with Remote Control and need help in operating the robot. Are there instructions/manuel available to download?


Hi, first be aware that there are three models of Robosapiens, the V1 (13" tall), V2(23" tall), and RS Media (23" tall with video screen on chest). The WowWee website has the manuals for the Robosapiens and they can also be found at several independent forums). Here's the link to the Robo V1 support page where the manual can be downloaded from: http://www.wowwee.com/en/support/robosapien. You'll see a drop down menu "SUPPORT BY PRODUCT" to get to the other manuals. You can also fins a lot of help at forums, I'd recommend starting at http://www.robocommunity.com/forums.
Good luck,'
John

Jan 30, 2011 | Toys

1 Answer

The WowWee (RSD2) Robosapien V2 Robot remote worked for 5 minutes after I started working with the robot and then quit never to work again. The LEDs do not light up as buttons are pushed. Of course the...


Open the Robot, and check the cables, this Robosapiens V2 has a well known problem with the wire harness that go from main board to the bateries trough the legs. They have a major problem in the wire insulations that crumbles and short the wires. No easy solution exist. Yo need to rewire by your own or accept that will never work again.

Oct 13, 2010 | Wowwee Toys

1 Answer

Hi,is there any chance i can buy the instructions for the robosapien v2? many thanks


Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

Oct 10, 2010 | Wowwee Mini Robosapien Humanoid Robot

1 Answer

Defective candian robosapien wowwee robot


did you send to official wowwee company in canada? did you email wowwee support canada? its a shame nearly ALL robosapien v2 have problems:( mostly to do with bad quality materials i.e wiring & bad quality screws & bad quality design flaws in general- its strange wowwee robots have only 90 days warranty :O & some have 180 days max warranty. there is a robocommunity forum on net (search for it & ask your questions there)

Apr 21, 2009 | Toys

1 Answer

Belt on steam vac v2


The V2 doesn't use a belt, it uses a turbine to drive the brush block, If brushes are not turning, either the shaft on the brush block broke off, or the turbine is bad and will have to be replaced.

Dec 23, 2007 | Hoover F5906-900 Upright Steam Vacuum

Not finding what you are looking for?
Toys Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

ray gallant

Level 3 Expert

41458 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...