Question about Duravit Duraplus, Two-Piece Toilet - D13018

Open Question

Mounting Duraplus cistern

How to mount and attach to toilet

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: cannot remove top of cistern

There are some dual flush cisterns where you have to depress one button to reveal a cavity in the second button. Put a screwdriver in that cavity to lever out the second button, then release the first button and prise that out.

Underneath the buttons is a screw which must be unscrewed to release the cistern lid.

Not sure if this will apply to you... but if not, good luck anyway.

Posted on Jul 02, 2010

  • 1739 Answers

SOURCE: Does anyone know where to

Information on your product can be found here along with measurements for installation. However there does not seem to be detailed installation instructions.

http://www.duravit.com/products/series/duraplus/toilets/toilet-close-coupled--022901_toilets_91994_useo6q3rng.html#


Suggest you review the following series of videos which provides detailed instructions on toilet removal and replacement.



Trust this is helpful.

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One of the tank bolts on our toiletleaks, but only when the tank is full. I have tried new washers, new washers with silicone, same result, only leaks when full. is there something else I can try


if it is a bolt that the cistern is using for mounting on the wall, lower the water level in the cistern as it is too full
the level should be around 1" lower that mounting holes or just below the overflow opening whether it be a pipe to the outside ordown the center of the flush tube into the pan

Dec 18, 2016 | Home

Tip

FIXING A TOILET THAT WILL NOT FLUSH!!! a simple but very effective money saving...


This simple how to, is based upon most lever operated toilets, with the cistern mounted above the toilet bowl. The make and model of toilet used for this feature is of the following:
Toilet and internal syphon
DUDLEY ELITEDudley S7 Cascade syphon
Problem:
My toilet will not flush, but the ball float valve is working and there is water in the cistern; no leaks present and the flushing lever is not broken or disconnected, what do I do?
Answer:
first isolate the water to the toilet or the main water supply to the house. Bail out the water from the cistern using a small jug or cup, (or you can syphon the water manually using a hosepipe or similar pipe, a towel to cover your mouth, and either a bucket or the toilet bowl) and remove water from the bottom of the cistern with a sponge.


Changing the syphon in a toilet that is not close coupled is far easier as you do not need to remove the cistern from the wall!


Undo the lower of the two large nuts beneath the cistern using a large pipe wrench or pair of water pump pliers, now disconnect the flush pipe and push it to one side.
Place a bucket or bowl beneath the cistern and undo the Nut which is immediately below the cistern (syphon replacing nut), some water may be released by the syphon, take note of any washers that are removed as new ones need fitting when replacing the siphon.
Unhook the lift rod from the flushing lever and remove the syphon.


Inside the toilet syphon, there will be a small plastic piece of sheet called a diaphragm; you can fabricate a replacement using the plastic title cover on a DVD case. Cut this to the exact same size and shape as the original part, and fit this to where the original diaphragm was. This is your new replacement.


Refitting is a complete reversal of removal, be sure to fit any washers (preferably new ones) that you have taken out. Ensure everything is tight but do not over tighten before refilling the cistern



on Aug 09, 2010 | Plumbing

1 Answer

How do i fix a leak from the cistern to the toilet bowl


There are bolts attaching the tank to the bowl check to see if they are correvtly tightened after you check to see if the gasket is properly seated.

Dec 25, 2014 | Home

1 Answer

Duravit toilet cistern fills slowly


make sure the toilet shut off is all the way on (if there is one) replace filler valve and should fill quite quickly.

Oct 08, 2014 | Duravit Duraplus, Two-Piece Toilet -...

1 Answer

Caroma toilet 12years old, concealed cistern. Water leaking around base when toilet is flushed. water level maintained when not flushing, so the leak must be between the cistern and the bowl. Had a plumber...


Fixing a leaky toilet is actually rather simple, requiring few tools and just a little time and effort. In looking at Caroma toilets on Google, they appear to be just a standard type of unit, and should present few if any problems for yourself or any handyman of modest skill.

If it is leaking around the base of the toilet - where the toilet sits on the floor, the repair item is a simple wax seal. Here is a tutorial to effect this repair: Replace Toilet Wax Ring. The wax ring is very inexpensive, usually $5 to $10 USD.

If the water is leaking from between the tank (cistern) and the toilet bowl, the job is even easier, as it does not require lifting and moving the entire toilet. A good tutorial for that repair is here: How to Replace Tank to Bowl Gasket . The gaskets, new nuts, bolts and rubber seals come in a kit and also cost only $5 to $10 USD.

I am sorry to hear your Plumber insisted you buy an entire new toilet, but do remember he is in the business of making money!

Jan 28, 2014 | Home

1 Answer

Does anyone know where to get hold of a manual for installing a toilet from Duravit, please? Specifically it is the Duraplus 022901. With many thanks, Fran.


Information on your product can be found here along with measurements for installation. However there does not seem to be detailed installation instructions.

http://www.duravit.com/products/series/duraplus/toilets/toilet-close-coupled--022901_toilets_91994_useo6q3rng.html#


Suggest you review the following series of videos which provides detailed instructions on toilet removal and replacement.



Trust this is helpful.

Jan 04, 2011 | Duravit Duraplus, Two-Piece Toilet -...

1 Answer

I installed a Moen Sage toilet paper holder. The right cover that attaches to the wall hardware via a small screw is loose and no amount of tightening corrects the problem. What am I doing wrong?


It is likely that the the mounting post on the wall has pulled loose.

You will need to remove the paper holder and inspect themounting posts; loosen the set screws in the base of the posts to do this.

Try tightening the screws holding the mounting posts to the wall. If the screws are unable to hold tight you will need to replace the wall anchors if they have been used.

Remove the mounting posts and the wall anchors and replace with new wall anchor, preferably a toggle anchor designed for sheetrock if possible.

With the wall anchors in place attach the mounting posts and install the paper holder; tightening the set screws in at the base of the posts.

Installation instructions for your product can be found here:

http://www.moen.ca/shared/pdf/yb2208sp.pdf

Oct 18, 2010 | Moen Home

1 Answer

Jacuzzi Era elongated seat attachment


first need to buy the longer oval seat so it sits correctly at the front most mounting screws are universal-- go buy thin rubber washers and trim and place between the hinge and bowl than tighten down this will stop slippage but the front if not correctly sitting on the bowl will still cause problems

Jan 22, 2010 | Jacuzzi Bath Era BK37 959 White toilet...

2 Answers

After cistern refill outflow into toilet bowl continues to dribble in - and you can see a slight flow into the bowl and every so often we hear the cistern refilling a small amount to compensate.


hi i would suggest your ball valve in the cistern needs ajusting remove the top of the cistern you will see the ajustment screw at the end fo the ball **** arm hope this helps

Nov 15, 2009 | Duravit 0910100005 Happy D Toilet Cistern ...

Not finding what you are looking for?
Duravit Duraplus, Two-Piece Toilet - D13018 Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Duravit Home Experts

paulcarew

Level 3 Expert

2458 Answers

Lawrence Oravetz

Level 3 Expert

9324 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14584 Answers

Are you a Duravit Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...