Question about Life Fitness T3 Treadmill with Advanced Console

1 Answer

Life gear error 3

Hone i select start its show on error 3 motor not run plz give me soliton thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Life Fitness Master
  • 6,694 Answers

Hi,
error 3 means the waking belt starts moving without any command. Make sure that you are not moving the belt manually before the treadmill stars .
for more details check the link
electronics repair help LIFE FITNESS T3 T3i T5 T5i T7i TREADMILL ERROR...

Posted on Feb 09, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: my life fitness t30 treadmill ''running error''

startup error on life fitness treadmill

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having trouble with my Canon imageRUNNER C9070 PRO. i cant copy or print anything, if i want to copy the screen shows me error code "E000008-0001". Anyone know how to stop this from?


Pressure belt unit life detection error

The amount of fixing motor current reached the specified
value due to torque-up of the pressure belt.

1. Confirm the current value is 80 (0.8 A) and below on

the service mode (COPIER> DISPLAY> FIXING> FXMTR8).

A. In case that the current value is "smaller than 80"

A-1. The pressure belt unit reaches to its life ->

replace the pressure belt unit

A-2. Faulty fixing unit drive gear -> replace the

gear

A-3. Fault fixing motor (M48)

B. In case that the current value is "80 and larger"

B-1. Faulty fixing unit drive gear -> replace the

gear

B-2. Faulty fixing motor (M48) -> replace the fixing

mtoor

B-3. Fault relay PCB -> replace it

2. Clear the current value log of fixing motor on the

service mode (COPIER> FUNCTION> CLEAR> FX-LCLR)
after procedure.

Apr 12, 2016 | Canon Office Equipment & Supplies

1 Answer

Why the c-3461 error comes


Sir/Mam,
Press Utility/Counter, Details, "Stop 00 Stop 01", (Password if required 92729272)
After replacing a fusing unit or transfer belt unit, perform New Release to clear its life counter.

1. Select the key as follows.
[Counter] ? [Life] ? [New Release]

2. Open the front door.

3. Select a unit where New Release is made.

4. Press the Start key and perform New Release. Exit out

Apr 10, 2016 | Konica Minolta Bizhub C451 Copy-print-scan

1 Answer

I get error codes on the unit. Can you tell me what the error codes mean?


I AM GETTING ERROR 3 ON MY LIFESOURCE BLOOD PRESSURE MOINTOR 7 WHILEPUSHING ON START BUTTON,IT DOES NOT GO AHEAD MORE THEN FIGURE 2 & COMES BACK TO 1 & THEN SHOWS ERROR 3,CAN ANYONE,SUGGEST OR GIVE SOLUTION/REMEDY ON MY MAIL ID:hemant_pandya12@yahoo.com I HAD LOST OPERATING MANNUAL & WARRANTY CARD,ALTHOUGH THIS MONITORING INSTRUMENT'S HAVING LIFE TIME WARRANTY,INCLUDING CUFF. THANKING YOU.
H.M.PANDYA.

Mar 03, 2011 | Lifesource Digital Blood Pressure Monitor...

1 Answer

Hp laserjet 3550 keeps on giving me error message of code 59.99 what do i do to solve the problem please thank you.


ur developing motor gears worn out replace them ur problem will be resolved...............
and
This error also shows the faulty secondary transfer engaging mechanism.
1. Faulty secondary transfer engagement sensor.
Action: Replace the secondary transfer engagement sensor.
2. Faulty secondary transfer engaging solenoid.
Action: Replace the secondary transfer engaging solenoid.
3. Faulty feed motor.
Action: Replace the feed motor.
4. Faulty DC controller PCB
Action: Replace the DC controller PCB.

good luck, and do rate the solution if helps

Nov 30, 2010 | HP LaserJet 3550 Printer

2 Answers

Error 1 message on older life fitness t3 treadmill


Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It

Feb 17, 2010 | Life Fitness T3 Treadmill with Advanced...

1 Answer

Error Code: 07,010.43:263647 The printer gives me the code and automatically powers down. Anyone know what this means, and how I can fix it?


From the service manual:

7,010.4x: PM_FAULT_HEADTILT_HOME_ERROR
The printhead is stuck in the tilt position by the tilt arms. The process motor gearbox
being out of sync can also cause this error.
1. Reboot the printer.
2. Verify the lock arms rotate correctly.
3. Check for spilled ink around the printhead.
4. Check the process motor gears for damage. Ensure the
process gears are correctly aligned and homed.
5. Verify the process gear box, process shaft, and drive
module shaft are at home position.
6. Verify the headtilt gear will engage, see the home
positioning procedure on page. You can manually
engage the headtilt gear.
7. Run the Tilt Axis Drive test.
8. Run the Process Motor test.
9. Run the Head Maintenance Clutch test, if the test fails
replace the clutch.
10.Run Wiper Drive test. If this fails inspect the wiper
drive system.

Since posting all these test would be impractical, let me know if you need the service manual and I can send it your way. Thanks and please take a moment to rate as fixya.

Mar 10, 2009 | Xerox Phaser 8400 Laser Printer

1 Answer

Life fitness treadmill display: transistor error-won't run


This error shows up if motor controller detects a failed part. This isn’t a reset-able error. Treadmill will not allow workouts until serviced.
Solution
Main motor wires/leads could be disconnected at the start of a workout. If the motor is properly connected and in working condition then the drive transistor could have failed. Check Motor Controller.

Feb 28, 2009 | Life Fitness Remanufactured Next...

2 Answers

My Venta Airwasher LW44 motor won't start


Test the motor to see if it works. Make sure the motor is removed from the rest of the unit. To find out how to remove the unit please hit the "Go Back button and select the "How to remove the motor button"...
  1. Plug the unit in to a working outlet.
  2. Push the #1 speed button on top of the motor.
  3. You now need to engage the saftey switch to start the motor.
  4. Protruding from the motor are two plastic about 3-4 inch guiding arms.
  5. Look inside the end of both of these two guiding arms. One of the arms are hollow and the other one has a white safety switch in the arm.
  6. Use a pencil or small item to push in on the safety switch.
  7. If the fan sarts to rotate the motor is still working.
  8. If the fan does not rotate then the life of the motor has probably ended and a new motor is needed. ( insert motor part link)

For additional support email abdistrsupport@gmail.com

Nov 16, 2008 | Venta - Airwasher LW44 Air Purifier

3 Answers

My transcend usb jfv60 model is not accessible, but it is detecting , when i try to access it is giving "insert the disk" error, when i try to format it is giving the same error plz help me out


hello,
i think you lost your usb data traveler. if you want to try then you try to operate it another pc. and plz check the lock if it have.
thanks
ramesh

Nov 14, 2008 | Transcend USA 120GB Storejet 2.5" SATA -...

6 Answers

ERROR IS (MEMORY ACCESS VOILATION C0000005)


I AM FACING LOT OF PROBLEM DUE TO ABOVE SAID ERROR ALL THE OTHER SOFTWARE IS RUNNING PROPERLY EXECPT TALLY 7.2

TALLY IS OPEN UPTO SELECTION OF COMPANY AFTER THE COMPANY SELECTION AT GATEWAY OF TALLY IT SHOWS THE ERROR MEMORY ACCESS VOILATION C0000005

Nov 12, 2008 | Tally Line Matrix T6050 Printer

Not finding what you are looking for?

Open Questions:

See all Life Fitness T3 Treadmill with Advanced Console Questions

Life Fitness T3 Treadmill with Advanced Console Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Life Fitness Exercise & Fitness Experts

Howard
Howard

Level 2 Expert

115 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...