Question about Broan-NuTone QTXN110HL Combination Light Fan Exhaust Fan

Open Question

Nutone heater 9358 comes on when in the off position

When the heater is turned off. It comes on by itself and stays on for a few minutes then turns off. It keeps doing this. But the switch says "off"

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: NUTONE HEATER PROBLEM

contact nutone. the problem is that the sensor that shuts off the unit to prevent overheating is too sensitive or faulty. nutone website seems geared towards selling their product so you may have to call them direct at 1-888-336-6157. this is customer support. good luck.6-6157

Posted on Nov 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a toastmaster model 2517 space heater. it comes on for a few minutes and then shuts off and then in a few minutes then comes back on. is that normal for that model? if not,how do I fix it?


it sounds like it is turning off when it reaches the temperature setting you have it at. turn it a little higher and see if it stays on longer.

Mar 05, 2015 | Heating & Cooling

1 Answer

I accidently turned the pilot off and I can't get it to turn on Williams Model# 2001622


Turn the control valve to the PILOT position and push down and hold it in. Press the Ignitor Button and continue to hold the Control knob down, once the pilot lights. Wait one minute, release the Control Knob and if the pilot remains burning, turn the Control Knob counterclockwise to the ON Position. If after the burners light and burn for a few minutes, you can turn the Control Knob back (Clockwise) to the Pilot position (if you don't want the heater to come on automatically) and the pilot should remain lit.

Hope this helped to get you back up and burning.

Mar 30, 2011 | Williams Heating & Cooling

1 Answer

I have a glow warm 20000 btu natural gas unvented heater. The unit is wall mounted. It won't stay on for more than 15 minutes, then shuts itself off. Its in a corner if that makes a difference... but has...


well, these heaters are typically thermostat-bound, and I have found that they simply will not burn continuously, like a blue-flame heater. Try turning up the setting--this will make it come on/off more often, effectively heating at least one med-lg room, and partially for adjoining areas. Keep in mind that these only rated for 700-1500 SF--that is NOT the floor measurements, but square feet of airspace; eg., a 10' x 15' room has 10' x 15' x 8' (8 foot ceiling) =1200 sf. That said, My 15k btu wall unit had been the sole heating source for my entire home for 5 years, until last year, when I acquired another smaller unit. However, I typically only use a few rooms, and shut off unused areas (ya, was 'cool' in unused back room areas).

Dec 16, 2010 | Desa International GWP20T GLOWARM Wall...

1 Answer

The heater does not stay on long enough to heat my garage. it will come on for 3 to 5 minutes and shut off. it comes on again in 5 to 10 minutes for 3 to 5 minutes again. the heat is good when it runs....


You could tripping the high temp limit this will be located near the heat exchanger When it shuts how long does the blower motor stay running? Do you have a meter?

Dec 15, 2010 | Fahrenheat FUH5-4 Heater

1 Answer

NUTONE HEATER PROBLEM


contact nutone. the problem is that the sensor that shuts off the unit to prevent overheating is too sensitive or faulty. nutone website seems geared towards selling their product so you may have to call them direct at 1-888-336-6157. this is customer support. good luck.6-6157

Mar 03, 2010 | Broan-NuTone N-668RP Combination Light Fan...

1 Answer

NuTone 9093 Heat-A-Ventlite: Ventilation not working


My guess it will be the motor.That would be the first thing I would do is replace it.

Mar 13, 2009 | Broan-NuTone N-9093CH Combination Heater...

1 Answer

Noisy, smelly fan in nutone heater


You should probably replace the heater motor. All the parts should still be available for you fan and it should only take a few minutes to change out.

Dec 07, 2008 | Broan-NuTone Wall Heater

Not finding what you are looking for?
Dryers Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broan-NuTone Dryers Experts

Mike Squire

Level 2 Expert

391 Answers

Craig Dupler

Level 1 Expert

20 Answers

mike simpson

Level 3 Expert

505 Answers

Are you a Broan-NuTone Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...