Question about Hardware & Accessories
I dont't know how to use the comfortemp button on my oil filled Noma portable heater. when I push the button it turns green but it goes off when I realease it. How do I know if it is working?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Use the top button to adjust the current time & then push the bottom button once to save. Next is the time you want the lights to turn on & push bottom button once to save. The last setting is the time you want the lights to turn off. Don't forget to use the . (period) indicator for the pm setting. (I had the same problem and had to search the net to find someone else who had posted the instructions.)
Posted on Dec 14, 2008
ET525C is UPM timer
UPM ET525C Manual
Instructions are 14 pages. It is impractical to re-write 14 pages of instructions.
If you have a problem, add a comment and say exactly which programming you want to set, and I will respond.
-Timer can be programmed for ON and OFF times, for Dawn-Dusk, for Countdown, for Daylight countdown, for daylight saving, and for Random. Each different programming option has 8-12 steps shown in manual.
Posted on Nov 29, 2010
All Woods timers and manuals
N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.
To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.
To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.
Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.
Posted on Dec 12, 2010
Tips for a great answer:
Dec 01, 2014 | Heating & Cooling
Jan 23, 2013 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Feb 07, 2012 | Heating & Cooling
Oct 03, 2011 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Aug 19, 2011 | Hardware & Accessories
Feb 04, 2011 | Heating & Cooling
Nov 12, 2009 | Heating & Cooling
Dec 01, 2008 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
660 people viewed this question
Usually answered in minutes!