Question about Galaxy Radios DX-959 40-Channels Base CB Radio
Posted by Anonymous on
Turn the radio on.Now make sure its in cb not pa mode.Nowturn the squelch all the way to the left.Now turn RF gain and RF power all the way to the right.Hook an external speaker to the radio and see if it helps.By now the radio should be operating. If not then you have an internal problem..
Posted on Aug 10, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If there is no transmit at all, it sounds like it wasn't fully refurbished. If it is just low modulation then just turn VR16 and VR14 all the way to the left.
If its not working at all, send it back. It hasn't been refurbished.
Posted on May 03, 2009
mike has wiring problems. Check for breaks in cord and where the plug goes into the unit. If not original mike then has incorrect wiring for the radio and will need to be changed for config
Posted on May 01, 2010
SOURCE: I have a galaxy dx
did they put both the power ground and the audio ground together when they installed it? some echo's can only have the one ground , not both.. either the power wires ground or the coax ground on the audio wires.
also check the swr's..
Posted on Feb 26, 2011
Tips for a great answer:
Aug 01, 2013 | Galaxy Radios DX-959 40-Channels Base CB...
Jul 19, 2012 | Radio Communications
Dec 04, 2011 | Galaxy Radios DX-959 40-Channels Base CB...
Feb 19, 2011 | Galaxy Radios DX-959 40-Channels Base CB...
May 01, 2010 | Galaxy Radios DX-959 40-Channels Base CB...
Feb 24, 2010 | Galaxy Radios DX-959 40-Channels Base CB...
Jun 20, 2009 | Galaxy Radios DX-959 40-Channels Base CB...
Apr 24, 2009 | Galaxy Radios DX-959 40-Channels Base CB...
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: