Drivers are not needed. Just connect your PC to the modem with an ethernet cable. The modem should give the PC an IP address. Open a browser and in the address window type in 192.168.0.1 and you should see the setup screen for the modem.
I am trying to use my dsl modem with a wireless g routere but once it is hooked up my modem light...
(More)
I am trying to use my dsl modem with a wireless g routere but once it is hooked up my modem light just continues to blink
no internet light..every thing else working..i reset...unplugged and plugged up every thing the...
(More)
no internet light..every thing else working..i reset...unplugged and plugged up every thing the right way....im thinkin its somthing to do with at&t
internet explorer flashed turning off your comp.to install new up dates when finished no service...
(More)
internet explorer flashed turning off your comp.to install new up dates when finished no service flashed, lights not working on modem are ethernet, internet and aactivity
Beginning from start internet I have the same password, but in last months he is suddenly become...
(More)
Beginning from start internet I have the same password, but in last months he is suddenly become invalid. Right now again. I can't used to e-mail, etc. Early AT&T help through http:/192.168.0.1/