Question about Gateway SX2110G-UW318 Small Form Factor Desktop PC with AMD E1-1200
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you want to restore windows to when it was new, then go to start button,
all programs, accessories, system tools, system restore, check choose
a different restore point, next, now, check show all restore points.
See if the oldest restore point is good enough, it you are ok with that one
then left click on it to highlight it then click next and finish.
Posted on Feb 08, 2010
SOURCE: gateway sx2801-07e
Turn your computer off and then turn it on. Read on the first black screen to see which key will take you to the BIOS set up. In most cases its F2 or DEL buttons. When you are in the BIOS setup, on the list that comes up firstly, look for LOAD DEFAULT SETTINGS/VALUES. This will surely restore the factory settings
Posted on Dec 12, 2011
Tips for a great answer:
Feb 17, 2015 | Gateway Computers & Internet
Jul 17, 2014 | Gateway GM5088 1GB DDR PC-3200 Desktop...
Jul 15, 2014 | Gateway Fx Computers & Internet
Feb 25, 2013 | Gateway MT6705 Notebook
Feb 15, 2013 | Gateway LT2021u Netbook
Click "Start" on your Windows desktop. Navigate through "All Programs" and "Gateway." Click on "Gateway Recovery Management."
Click "Restore" when the Gateway Recovery Management window pops up, which will take the system back to the default factory specifications. A box will pop up asking for confirmation, click "Yes" and then "Start." You may have to enter a password as well, but only if your particular Gateway had a password set.
Wait for the computer to restart. A "Restore from factory default" box will appear, requiring you to click "Next" twice in a row. Click "OK" in the box that appears next, and wait for the hard drive partition to be created. The factory default installation will then be moved over to the hard drive.
Click "OK" in the box that appears and wait for a second Gateway restart. Several minutes will pass as Windows "starts for the first time." When restarting finally finishes, a "Set Up Windows" dialog box will appear. Click "Next," followed by checking the license agreement box, and then "Next" again.
Enter a user name and picture, if desired, and a computer name. Also, customize the background wallpaper for your desktop, optionally. Click "Next."
Click "Use Recommended Settings" on the Protect Windows-based dialog box that pops up.
Set your correct date and time settings in the next box. Select your location in the following screen. Click "Next," followed by "Start" to finish.
Wait while Windows checks for your individual Gateway computer specifications and adjusts accordingly. This will likely take several minutes, so leaving your computer for a short time is fine. Windows will then prepare your hardware and finish your Gateway restoration process, including the installation of Gateway Recovery Management. Once completed, your Gateway is good to go and ready at factory settings.
hope this helps
Jun 25, 2012 | Gateway DX4200-09 PC Desktop
May 28, 2012 | Gateway Computers & Internet
May 05, 2011 | Gateway ZX493131e Notebook
May 06, 2010 | Gateway MT6707 Notebook PC
155 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: