Question about Uniden Lands Phones

1 Answer

Red light stays on

Had new optic cable installed and since then the red light on the answering machine will not go off. Have unplug everything and still is on.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Uniden Master
  • 102,366 Answers

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Posted on Jun 17, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently purchased an LG NB3740 Soundbar and everything works great as far as sound. The problem I'm having is that when I try to access the home screen menu to search thru apps, settings and other...


Disconnect the HDMI cable and use only the optical cable for better sound. Don't connect both at the same time. Once the set sees the optical cable it switches to it.

Nov 17, 2014 | Audio Players & Recorders

1 Answer

We have a GE Didital Answerer with Call Waiting Caller ID and Speakerphone, (model 29897) While remodeling the room we had to unplug the phone.. Now that the room is done and back together we noticed the...


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone (or while your phone is unplugged). Please contact your telephone company for instructions on accessing their voicemail system.

Oct 12, 2013 | GE Lands Phones

1 Answer

I install a new biostar t series model:TA785GE and it doesn't load windows any fresh version of windows the only thing it the loads the windows and wen the logo come on just freezes "I change hdd,optical...


Well, we old dogs would just go back and unplug everything, and then replug everything back in for a start. Did you use an anti-static wrist band when you were doing this install?

Oct 10, 2013 | Gateway Computers & Internet

1 Answer

Flashing red power light on Gateway 700X


try disconnecting the lower optical drive and rebooting...may just be a bad drive.

Sep 04, 2012 | Gateway 700 X PC Desktop

1 Answer

I need to be able to get my new optical HP mouse working with my toshiba laptop


hi is it wireless optical mouse? you might need to install the driver. if it's wired just plugged it in,if it still does not work, unplug the power cable for a minute and replug back everything in

Jan 14, 2011 | HP Wireless Optical Mouse

1 Answer

I have an LG DVD Reciever HT462 which i want to connect to my PS3. My PS3 is all set up correct as I have spoke with Sony. I have the PS3 connected via a HDMI cable to my TV and an optical cable running...


Hi there,
It would appear from what you have said that you have everything connected properly. Maybe a silly question, but make sure you select the digital input on your LG to get the sound from the PS3. If there is still no joy, unplug the optical from the back of the LG unit. Look at the end of the Optical cable that should still be connected to the ps3. Is there what looks light a red light there? if so it means that the optical is getting to the LG system and the LG sytem's digital in port is Duff. If there is no "Red Light", unplug it from the PS3 and look directly at the optical out port on the ps3. Is there a Red Light there? if there is, you need a new optical cable. If there is no red light, you need to enable the digial output on the ps3. If you have and it's still not "red". the optical port is duff.

Jan 07, 2011 | LG Audio Players & Recorders

2 Answers

Answer light flashes, answering machine doesn't answer. have no manual.


Possible solution.

I have the same problem -- I returned the phone and got a new one. 3 weeks later, the power went out -- same thing. Light flashes but phone won't work.

I called Panasonic and they advised me to remove all the batteries from the handsets, and unplug all the bases for 'a few minutes'. This did nothing...when I plugged everything in, answering machine still would not work.

I spoke to my brother who is an electrician, and he said the base has a 'capacitor' in it, and will not drain down (so phone can be reset) unless it's unplugged for at LEAST a few hours. He suggested I unplug everything and remove the batteries and leave it all overnight. Will attempt this and let you know if this is a resolution.

May 03, 2009 | Panasonic DECT 6.0 Expandable Cordless...

1 Answer

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,
or an opto-ferro-magnetic floppy?

Generally:

1) External drive:
============
a) just power it up and connect it to the PC using an USB
or firewire (1394) cable. If it is USB, make sure your PC
is set up for USB-2 which is astronomically faster.

b) The windows operating system should automatically
detect it and install the low level device drivers.
Then you can run the installation driver CD that came
with the drive.

2) Internal drive:
==========

a) Shut down Windows from the START menu,
chose shut down the system, NOT restart.

b) When it finishes shutting down, turn of the
power at the back (!) of the PC and unplug
the power cord.

Now turn the power switch back on for a few
with the cord unplugged, then shut it off again.

This will drain any internal capacitors inside the
power supply to make sure you don't fry anything
while you poke around.

c) Open up the computer case and look to see where
the other hard drives are installed and physically
mount the new optical drive inside the case.

d) Locate a spare power cable coming from the power
supply (Black, Red and Yellow wires) and hook it
into the back of the drive.

It should only fit one way, but there are several
different kinds of connectors, depending on the
drive type, so you may need an adapter cable.

i) Large 4 pin connector = Red, Yellow, Black, Black
ii) Miniature -//- = -//-
iii) SATA power cable = Small black hooked beastie.

Also make sure the power supply can handle
the extra current, this depends on the other stuff
such as drives and video card you already have in
the machine.

If your power supply is less than 600W on a modern
machine, now may be the time to upgrade it.

I have two video cards, 8 hard drives and a DVD,
so I had to upgrade to a 1000W to prevent my
system from randomly crashing during boot up,
when everything spins up for a self-test.

e) Once the power is connected, you need to connect
the data cable, which comes in a least 3 different
types:

IDE or PATA = Parallel ATA ribbon cable

SATA = Serial ATA cable, small flat cable with a red,
blue or orange jacket, and small black
hooked connectors at each end.

Note that these are a different size and
shape from the SATA power cables.

SCSI = pronounce scuzzi, no longer common.

One end of this data cable connects to the back of the
optical drive, the other to the motherboard, but this is
where it gets more complicated, because the mother
boards are fussy about which slot you plug them into.

You need to follow your motherboard manual here (HP) !

For SATA cables, you have to make sure that the motherboard
can handle them, older motherboards cannot, requiring an
adapter card. Also many of the new motherboards offer
multiple drive configurations such as RAID.

=============================
RAID = Redundant Array of Independent Drives:
RAID 0 = STRIPE for high speed at the cost of security
RAID 1 = MIRROR for data redundancy at the cost of $ cost
RAID 01 = Stripe of mirrors
RAID 10 = Mirror of stripes
RAID 5 = Stripe with parity compromise
etc...
=============================

Anyway, the problem is that on these mother boards some
of the SATA connectors are general purpose (which is what
you need), while others are not (i.e dedicated RAID),

and you may have to change jumpers on the board
or BIOS settings to get it to work right.

Also if the optical drive is to be bootable, then it sould
be connected to SATA1 or SATA2, but that again depends
on the motherboard and the BIOS boot sequence settings.

===

With the older style IDE or PATA drives, which includes most
optical drives (since SATA is fairly recent), most motherboards
provide two separate IDE ports, each of which can handle a
pair of drives for a total of four.

IDE1, Master = Drive 0
IDE1, Slave = Drive 1
IDE2, Master = Drive 2
IDE2, Master = Drive 3

Each pair of drives shares a single ribbon cable.
Older cables have 40 conductors,
Newer cables have 80 conductors for UDMA.

While the end connectors are the same, only 40 conductors,
the 80 conductor cables have interlaced grounding, which
allows them to transfer data at a higher speed.

Older optical drives used the 40 conductor, newer ones
use the 80 conductor, but there is no harm done using
the 80. If the ribbon cable came with the optical dive,
you can use it if you are plugging it into a separate IDE
port, BUT

Never use a 40 conductor ribbon cable if it is shared between
the optical and the hard drive, because this will slow down
the hard drive to the lower UDMA speed.

Now about the Master Slave thing:
=========================
1) Each PATA=IDE port can only handle one master/ slave pair.

2) You must never connect two MASTERS or two SLAVES
to the same cable.

3) The boot hard drive must be a MASTER on IDE1
for most systems, unless the BIOS has a way
remapping them.

4) When a hard drive and an optical drive share the same
IDE port and cable, the hard drive should be the MASTER,
for maximum speed, optical drives are often slower.

5) IDE hard drives and optical drives use a set of
jumpers near the IDE connector to determine if they
act as a MASTER or a SLAVE. This should be set before
you install them, because it is very hard to get at the
jumpers afterwards:

MASTER this forces the drive to act as a MASTER
SLAVE this forces the drive to act as a SLAVE

CABLE SELECT special color coded ribbon cables
(80 conductor) must be used to make this work.
These now come with most new motherboards.

The blue connector at the far end of the cable, away from
the other two goes into the motherboard.

The black connector at the opposite end (near the gray one)
goes into the MASTER drive.

The gray connector in the middle goes to the SLAVE drive.
(both drives should be setup as CABLE SELECT for this to
work)

When connecting the ribbon cable to the IDE drive, make sure
the PIN 1, the marked side of the ribbon goes near the power
connector. On the mother board, the marked of the ribbon
connector goes into PIN 1. The connector should be keyed
to only fit one way, but don't count on it.

Hope this get you started,

Martin

BTW please rate my answers.

Jun 14, 2008 | Computers & Internet

2 Answers

Flashing message light


Insert a new 9 Volt battery (machine will work without a battery if you want to ignore the blinking light)

Apr 27, 2008 | Conair TAD2018CG Digital Answering Machine

1 Answer

Acer Aspire 5633WLMi Laptop


unplug everything that isn't necessary to run the laptop ie, external mouse, battery, etc. Then plug the ac adapter in, making sure the switch for 110/220 is appropriate for your region. Now, does the machine turn on? PLease respond with the answer, and we'll go from there. Good luck

Sep 04, 2007 | Acer Aspire 5600 Series 5630-6951 Laptop

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5059 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...