Question about Televison & Video

Open Question

Unlock channels suddenlink tv

One of my channels on my tv was accidentally locked by my roommate. After entering the password I was prompted 'Go back to the precious screen'. The arrows surrounding the OK button in the center of my new Suddenlink remote wouldn't allow me to navigate to that part of the screen. I was able to use it to navigate to get to the step where you unlock the screen. What key do I enter to 'go back' using the suddenlink remote control?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Suddenlink remote will not operate my Olevia LCD TV

Device Key Code TV. 1610

  1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).

  2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice.

  3. Use the lookup tool below to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.

    NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.

  4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code”).

    NOTE: If the device does not have a PWR key, press the PLAY key.

  5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page.

Posted on Jun 01, 2009

Ad
  • 44 Answers

SOURCE: I have a suddenlink remote control and my box is

Hi - My name is Tina and I am with Suddenlink. Couple of suggestions...

1. Please make sure the batteries in the remote are good.
2. Please make sure you have the Source on the Remote switched to CBL.
3. If those two suggestions do not resolve your issue, you could go to the local Suddenlink office and exchange your remote.

If you have any further questions, please feel free to email me at tina-AT-suddenlink-DOT-com. Thanks!

Posted on Jun 28, 2010

  • 44 Answers

SOURCE: I have the new suddenlink

Hi - My name is Tina and I am with Suddenlink. I am very sorry for the issues you are having with the remotes for your new DigitaLink boxes. If you would email me at tina-AT-suddenlink-DOT-com, I would be happy to help resolve this issue. Thanks!

Posted on Oct 14, 2010

  • 44 Answers

SOURCE: The remote control supplied by

Hi - My name is Tina and I am with Suddenlink. I am sorry to hear your remote control is not working. You could take it into your local office and exchange it for a new one... or, contact customer service and they could send a technician out to swap it for you. Customer Service can be reached at 1-888-822-5151.

Posted on Jan 03, 2011

Gophering
  • 187 Answers

SOURCE: my original remote control has

TURN YOUR TV ON AND KEEP PRESSING THE POWER KEY TILL TV SHUTS OFF, THIS WILL FIND THE CODE, YOU'LL HAVE TO DO THE SAME FOR TUNING YOUR TV BACK ON TOO!

HOPE THIS HELPS!

Posted on Aug 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off child lock without remote control jvc lt-32sh6


Press the "Menu" button to set the lock code for your JVC TV. A padlock icon will appear on the menu display.

Press "Zero" to access the lock code function then use the left and right arrows to select the four-digit number for your code. Use the up and down arrows to move to the next area of the display.

Select the up or down arrow to finish your lock code then use the left or right arrow to save your lock code settings and exit the menu. You can return to this display if you forget your four-digit lock code and set another code.

Write your four-digit lock code down and keep it in a safe, private area.

Select the locked TV channel you desire to watch or want to unlock. A message will appear on the display requesting you to enter your lock code to unlock the channel.
Unlock your JVC TV by entering your lock code on the 10-key pad. The message "Invalid Lock Code!" will appear on the screen if you enter the wrong lock code.


OR


Select "TV" from the menu then select "V-Chip" from the drop-down list on the screen. "Please Input Password" will appear on the screen.

Enter your four-digit password by selecting numbers on the 10-pad that appears on the V-Chip menu display or your remote control. Create a new password if you forget it by unplugging your TV power cord from the outlet then reconnect the power cord. This procedure resets your password to "0000." Enter four numbers for your new password using the keypad on the screen or your remote and select the arrow to advance to the next number. Press "OK" on your remote or select "OK" on the screen to set your new password.
Unlock a TV rating or TV channel by selecting "MPAA" or "TVPG" from the V-Chip menu. Use the up or down arrows to select the locked rating then select "OK" on the display or press the "OK" button on your remote control to unlock it. The MPAA represents the U.S. Motion Picture Association of America rating system, such as "NC-17," meaning not intended for viewers 17 years or younger.




Nov 01, 2012 | Televison & Video

4 Answers

Sansui TV/VCR/DVD combo


This solution is provided by one of our experts premtech


Child Lock

Combos
--Should have original remote. Press and hold the power button for 6 to 10 seconds


Combo Model T25208, V-Chip Forgotten Password
If you forget your password, simultaneously press VOLUME down on the TV/VCR front panel and the 0 number button on the remote for a few seconds. This resets the password and you can enter a new one.

Combo Model 13TVR62, V-Chip Forgotten Password
If you forget your password, press STOP/EJECT on the TV/VCR front panel and MENU on the remote simultaneously. This resets the password, but not the limits you’ve set.
Televisions with Parental Lock Feature


If you forgot your password for this feature, press the following buttons on the remote, one at a time. (Note: You must be in the password entry screen) Press, Mute, Display,Clear and Reset, this unlocks parental controls and you can now re-enter a new password.
OR TRY THIS..
Press and hold Menu on the TV AND volume down on the remote for 3 seconds. Nothing will appear on the screen, and the Parental Controls will unlock, and you can re-enter a new password with the LOCK PARENTAL CONTROLS

CTC169AU
Channels that have been locked can be viewed only when the PARENTAL CTRL function is set to OFF. This can only be done with the remote control-it can not be changed with the buttons on the front of the TV.

Therefore, after you turn on PARENTAL CTRL, you simply hide the remote control so that your children can not watch the locked channels. The locked-out channels will remain unviewable even if the TV is unplugged or the channels are autoprogrammed again. The only way to view locked channels is to use the supplied remote control to set the PARENTAL CTRL function to OFF.

The PARENTAL CTRL and the CHAN CTRL functions work hand-in-hand. The instructions below will first tell you how to turn parental control on or off with the PARENTAL CTRL function and then how to lock desired channels with the CHAN CTRL function.
1. Repeatedly press MENU to select SETUP MENU, and then press + or - to display setup functions. Repeatedly press MENU to select the PARENTAL CTRL function. . When this function is set to ON, PARENTAL CTRL is activated and any channels you locked with the CHAN CTRL function will not be viewable. . When this function is set to OFF, PARENTAL CTRL is deactivated and all channels are viewable.

2. To lock channels, press the MENU button to select the CHAN CTRL function. Select a channel you want to lock by pressing CHANNEL up or down. Then press +. The CHAN CTRL setting will change from NORMAL to LOCKED when that channel is locked. To return the channel to NORMAL, press the - button. Repeat step 2 for each channel you want to lock. If the PARENTAL CTRL function is set to ON while you are locking out channels, each channel will go blank as you lock it. When the PARENTAL CTRL function is set to ON and a channel which has been locked out is tuned, the TV will display the words PARENTAL CONTROL to let your kids know you have locked it.

CTC185's
If the front panel function buttons don't work, (menu, ch up/dn etc.) but the functions work normal with the remote, enter the "Channel" menu with the remote and turn "Parental Control" off.

CTC203's
In the event you have forgotten your password, perform the following procedure:
Press and hold for 3 seconds the TV button on the remote while pressing the menu button on the TV.
This procedure will turn off the parental lock and erase the previous password .

Another Possibility To Try For Various Models: If TV's in the Parental mode and askes for a password that's forgotten, Press menu on the TV, select Parental Lock #4 on menu, then with the remote press Mute, Display, Clear, and Reset buttons in sequence.

TX808 Chassis
If Parental Controls have been set and you don't know the password, do this:
Press and hold the volume down and the channel up buttons at the same time for 5 seconds.
Now you can reset the password to 0000, and using that password you can now access the V-Chip menus.

TV's (Made by Daewoo or possibly Apex, ie. GE model 24GP653)
The factory default pass code of 6688 is also the override code, in case the owner forgets their pass code. If that doesn't work, another place in the owners manual says to push Function and Mute on the remote at the same time. Function is the top right button.

Jun 28, 2008 | Sansui DTV2760 27" TV

Tip

Polaroid LCD TV Parental lock/unlock


Program Lock
Input the default password of 1235, the submenu
of Parent will display if the password is correct.

(a) When changing the password, the changed
password will be updated after four digits are input.
The word "ok" appears after you input the same
number twice, if the two passwords are different the
word "Failure" will appear.

(b) When All Clear is selected, all programs are unlocked.

(c) After you exit from the Program Lock menu and switch to a locked channel, the picture and
sound will be locked unless you input the correct password. The channel will remain unlocked
until the TV is turned off. After the TV is turned on again, the password must be re-entered to
view the locked channels again.

(d) If your program is locked, input the correct password to enter the Auto Search submenu.
Operating Auto Search will cancel the locked status.

(e) The default password is always effective.

(f) Entering the default password allows you to go to the Program Lock menu, then change the
password while the default password is still effective. This branch menu cannot be entered if a
wrong password is keyed in, In this case, press MENU to return to the previous menu.

(g) There will be slight delays while using the Lock All and Clear All functions.

● Child Lock
In Child Lock On mode, the buttons on the TV do not work. A prompt "Panel buttons are being
locked" will be displayed. However, the remote control buttons will still function. When the TV is
on and the Child Lock is on, a prompt "Locked, power off after 6s" will appear. Use the remote
control to control the TV. Otherwise, the TV will automatically enter into Standby mode.

Having trouble with setting your Parental Controls (V-Chip)?
The factory preset password is 0000. This password must be used first before setting your own personal password. It is recommended that you keep your personal password in a safe place and away from children. In the event you loose your personal password the master password is 8202. The master password overrides all passwords. The master password can't be changed and should be kept in a safe place away from children.

on Aug 17, 2010 | Televison & Video

1 Answer

I need to reset the password for my zenith tv model # C27J28B


If you did forget the code to release V-chip to this TV, there is no other way than contact its authorised service center. If you want to unlock the child-lock to certain channels:

1
Press or to display the password entering mode.
Press MENU, then press or to display the (LOCKS) menu.
2
Use the number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
3
Press or to highlight CH LOCK and press or to display
the CH LOCK menu.
4
Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
5
6 Press EXIT to return to normal viewing.

Jul 04, 2012 | Zenith Televison & Video

1 Answer

My sharp tv was accidentally lock and i can't even remember the password again. pls what will I do?


hi,
Check the following two procedures to unlock the tv.
1. Press and hold the display button on the remote for 5 seconds for unlocking the tv.. if doesnt help then,

1. Press VOL -- button on the frond panel of the tv and Child lock button on the Remote together. (remote should be faced to tv when you press the buttons)
2. Press MODE button on the remote
3. Using channel +/-- select chid lock
4. Enter New code
5. Press the mode button
OK

Sep 19, 2011 | Televison & Video

3 Answers

How to reset a password


Set up blocking schemes to block specific channels, ratings, and external viewing sources.

A password is required to gain access to this menu.

Setting up Your Password

For USA

LOCK Move Enter

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

For Canada

LOCK Move Enter

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Close

Enter Password

* * * *

Select LOCK.

1MENU

ENTER

Input the password.

2 Enter the password as requested.

The TV is set up with the initial password
"0-0-0-0".

Hope this helps

John

Sep 17, 2011 | LG 42LG50 42 in. LCD HDTV

1 Answer

There. Is a channel lock on my tv. So I can't change the channels. How do I take it off?? Help!


Hello
you have to unlock your jvc set, and reset the V-Chip settings. There are two ways to unlock JVC TVs, you have to find out which proceedings frome below mentioned will work with your TV.

[1]

Press the "Menu" button to set the lock code for your JVC TV. A padlock icon will appear on the menu display.

Press "Zero" to access the lock code function then use the left and right arrows to select the four-digit number for your code. Use the up and down arrows to move to the next area of the display.

Select the up or down arrow to finish your lock code then use the left or right arrow to save your lock code settings and exit the menu. You can return to this display if you forget your four-digit lock code and set another code.

Write your four-digit lock code down and keep it in a safe, private area.

Select the locked TV channel you desire to watch or want to unlock. A message will appear on the display requesting you to enter your lock code to unlock the channel.

Unlock your JVC TV by entering your lock code on the 10-key pad. The message "Invalid Lock Code!" will appear on the screen if you enter the wrong lock code.
[2]

Select "TV" from the menu then select "V-Chip" from the drop-down list on the screen. "Please Input Password" will appear on the screen.

Enter your four-digit password by selecting numbers on the 10-pad that appears on the V-Chip menu display or your remote control. Create a new password if you forget it by unplugging your TV power cord from the outlet then reconnect the power cord. This procedure resets your password to "0000." Enter four numbers for your new password using the keypad on the screen or your remote and select the arrow to advance to the next number. Press "OK" on your remote or select "OK" on the screen to set your new password.
Unlock a TV rating or TV channel by selecting "MPAA" or "TVPG" from the V-Chip menu. Use the up or down arrows to select the locked rating then select "OK" on the display or press the "OK" button on your remote control to unlock it. The MPAA represents the U.S. Motion Picture Association of America rating system, such as "NC-17," meaning not intended for viewers 17 years or younger. TVPG provides you

May 10, 2011 | JVC AV-27020 TV

1 Answer

V-chip block passcode


Hello
You must have its original remote control handset to unlock your Mitsubishi tv.

After you set the lock, you must use your pass code

to view a locked program, view the locked TV, view

a locked channel, cancel the lock, or enter the Lock

menus.

If you forget your pass code, you can view the locked

TV without entering your pass code. When you are

prompted for your pass code, press the number 9 and

QV keys on the TV remote control at the same time. This

process temporarily unlocks the TV.

When entering the Lock menu, this process deletes

your old pass code and prompts you to enter a new

pass code.

• You can either enter a new pass code to open the

Lock menu and make changes or press EXIT to close

the menu.

• If any of the locks are turned on and you exit the

menus when prompted for a new code, the old

code and all lock settings are retained.

• If all locks are turned off and you exit the menus

when prompted for a new code, then the previous
code is erased.
OK.

Mar 17, 2011 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

My roommate blocked a channed on my tv and wont unblock it how to i rest the setting to ge the channel back its the food network channel nothing bad


The channel block option is located in the Parental Controls menu. If a password has not been set, the default password is "0000" if a password has been set but you do not know it, press "7777"

Mar 15, 2011 | LG 32LG30 32 in. LCD HDTV

1 Answer

Channels lock


If you forget your pass code, you can view the locked
TV without entering your pass code. When you are
prompted for your pass code, press the number 9 and QV
buttons on the TV remote control at the same time. This
process temporarily unlocks the TV
When entering the Parental Lock menu, this process
deletes your old pass code and prompts you to enter a
new pass code. Press EXIT to exit the menu.

Jul 05, 2010 | Mitsubishi WD-65731 65" HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...