Question about Minolta EP4000/5000 CS/PRO Copier

1 Answer

Code error c0500 - Minolta EP4000/5000 CS/PRO Copier

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Minolta Master
  • 6,161 Answers

Open the front door, to the upper left there is a small access remove the plate press the button with the machine on that will reset the c0500 code if it comes back do NOT reset the machine it is telling you that it need fixing continue to do that can destroy boards worse case start a fire. YOU are resetting the code for the Fusing Unit which fuse the toner to the paper. GETS very hot normally.

Posted on Jan 04, 2015

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

faeq8
  • 7 Answers

SOURCE: error code C0500

C0500: Warming-up Failure C0510: Abnormally Low Fusing Temperature C0520: Abnormally High Fusing Temperature Relevant Electrical Parts Fusing Roller Heater Lamp H1 Fusing Roller Thermistor TH1 Fusing Roller Thermostat TS1 Fusing Roller Heater Lamp Fuse TF1 Side Cover Interlock Switch 2 S3 Power Supply Unit 1 PU1 Master Board PWB-A
Step Check Item Result Action 1 Does H1 turn ON after the malfunction is reset? YES Check TH1 for contamination or installation. 2 Is there continuity across CN3-1 and 2 on the Fusing Unit end with CN3 (2P) disconnected? NO Check H1, TS1, and TF1 for continuity. 3 Is there continuity across 1A and 1B, and across 2A and 2B, of S3 when S3 is turned ON? NO Change S3. 4 Is the resistance of TH1 (across CN5-2 and 3 on the Fusing Unit end) infinity? YES Change TH1. 5 Is Fuse F2 on PU1 conducting? YES Change PU1 or PWB-A. NO Change the fuse. Step Check Item Result Action 1 Is TH1 installed properly? NO Install TH1 correctly. 2 Is TH1 dirty? YES Clean or change TH1. 3 Is the circuit across CN5-2 and 3 on the Fusing Unit end closed when CN5 (4P) is disconnected? YES Change

Posted on Dec 28, 2008

Cogz
  • 1326 Answers

SOURCE: how to reset error c0500

The error code means that the fuser is not warming up correctly. There is a small black rest botton on the main controler PCB on the back of the copier. You are going to have to take the back cover off, I believe in is four screws. Turn the power off and remove the back cover and find the small black botton, once you have found it, turn the copier back ON and press the botton and see if the error code can be rest. If it dose you are good to go... If not you may have to replace the fuser unit..... I did have a problem that was not solved with the fuser unit.. It turned out to be right side door switch... I would look there as well with the back cover off... Good Luck

Posted on Apr 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO SOLVE ERROR CODE C0500 FOR KONICA MINOLTA 211


Error code C0500 and C0501 means Fixing unit's temperature abnormality.

How to reset these codes?

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

http://servicekonicaminolta.blogspot.com/2012/03/error-code-c0500-and-c0501.html

Jun 14, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

Reset c0500


To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

Aug 08, 2016 | Office Equipment & Supplies

1 Answer

C0500


To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

May 01, 2014 | Minolta Di3510f Bizhub Copier

1 Answer

Machine give a coade c0500


The error code C0500 deals with the fixing unit temperature. I could be a blown fixing lamp or thermal fuse or thirmister. You did not give the model number, so I can not tell you how to reset the error code. Good Luck

Nov 02, 2013 | Minolta Office Equipment & Supplies

1 Answer

The machine di251f is saying contact your technician with code error c0500 please help


C0500: Warming-up Failure
error code c0500, checked lamp and thermo fuses, checked thermistor ok. reset machine

Jun 17, 2011 | Minolta Di251 All-In-One Printer

2 Answers

Minolta error code c0500


A C0500 code deals with the fuser temp. You maybe able to reset the code, by pressing the trouble rest switch. If it will not clear you will need to look deeper into the fuser unit. I don't know what model you have, so I can not go any further. Good Luck

Nov 24, 2010 | Office Equipment & Supplies

2 Answers

Konica Minolta Di2510 error code C0500,can not reset error code


check the fusing unit parts heaterlamp,thermistor & thermoswitch i'm sure one of them is the cause of error c0500

Nov 22, 2010 | Konica Minolta DiALTA Di183F Copier

1 Answer

Error code C0500


C500 is a fuser code, the hot part of the machine, the fuser fuses the toner to the paper, so that the toner does not smear off. But to solve this must have the model number. As each series of machine has a different way to reset machine

Jul 21, 2009 | Konica Minolta DiALTA Di200 Copier

3 Answers

IMAGISTICS 2620 Error code C0500


How to reset malfunction code C0500 of a imagistic

Feb 03, 2009 | Konica Minolta DiALTA Di200 Copier

4 Answers

Minolta di 2510 code c0500


lo ke pasa es ke mi copiadora ya no responde mas y me sale este error una averia "a sido detectada avice a su servisio tecnio y digalke el codigo c0500" ya no se ke hacer... ayuda por favor..

Jun 24, 2008 | Minolta Di2510 All-In-One Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...