3mac mlt360 Are MLT360 Tripod quick release plate enterchangable with any other tripod?

Try a plate from another tripod. I have three different tripods, and the quick-release plates are all interchangeable.

Go to this page: http://www.tripodquickrelease.com/Generic_Tripods.htm

they have descriptions on how to measure your tripod and a list of popular quick releases.

If it's a quick release tripod you need to remove the quick release plate (Usually a release lever to the side of the top of the tripod) and then fasten the plate securely to the camera and then the plate to the tripod. Older non-quick-release tripods have a knurled screw located below the flat area where the camera is attached. If the screw is missing, get a relacement from your local hardware store - 1/4" -20. (Find a way to keep the new one from getting lost.)

it is a quick release plate. there is usually a button or lever to release the plate. you then screw the plate into the bottom of your camera or camcorder and mount the plate back onto the tripod. you can leave the plate on your camera when you store it to allow for faster setup.

Hi there,
You can get the quick release lever seperately. Check the website for the part needed.
http://bogentripodparts.com/parts/head3265.htm
Hope this helps,
Andrew

You can purchase on amazon, take a look here: Ambico 54 Inch Tripod with Quick Release 0555. I hope this was helpful. Cheers

http://www.tripodquickrelease.com/Sony_Quick_Releases.htm
they don't have that model listed, but they seem willing to try. Several people are thanked for finding out which plate fit which tripod.

Quick release plates can be purchased on amazon, here: Amazon com Dynex tripod quick release plate. Take a look. Wish you ebst of luck.
Thomas

Try Best Buy

try contacting [email protected]
They specialize in quick release plates, and I just ordered one for my Sony tripod.