Question about Jada Remote Control Speed Racer Mach 5 Car RC 1:10

Open Question

Remote or reciever test troubleshooting 49mhz

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If I buy two rock crawlers for my kids will the signals from the remotes interfere with each other?


If they are on the same channel then yes. Most rc cars have a sticker or some other marking on the box if they are available in different channels. Usual they use 27mhz and 49mhz bands. Some use one band but have a switch to change the coding used...but this is usually also indicated on the box.

Dec 05, 2016 | Televison & Video

1 Answer

Can I order replacement remotes? The red robot is a 49MHz and the blue robot is 27MHz.


sorry you have to contact the manufacturer . and we do not know who that was

Jun 29, 2015 | Toys

1 Answer

Remote and car different transmitting channels


Either the controller or the car has to be exchanged so that both operate on the same frequency.

Dec 30, 2013 | Sharper Image Blue Hat Toy Company Kids...

1 Answer

I need a replacement remote for a Jeremy McGrath Tyco X-treme cycle


I had the same problem and found I was able to use a remote from a similar Tyco R/C toy. Many of these R/C toys from the same manufacturer and era have compatible control signals and will work with another's controller if they are using the same frequencies. I found a similar 49Mhz Tyco remote from a local thrift store and it works for me, perhaps you can as well..

Jan 24, 2013 | Tyco Toys

1 Answer

Mitsubishi remote troubleshooting


The remote can be tested (every button if needed) by any shop--a digital camera in a very dark room will react when the remote is pointed at it and buttons pressed with a faint flash on the camera display.

If remote tests good that leaves the remote receiver in the set.

Dec 04, 2012 | Mitsubishi Lt-40164 40 Inch Unisen Led Tv

1 Answer

When i turn on the power switch fans on high and the light is on the remote does nothing heater on it stopped working a yr ago


Call the company, then buy another fan without remote control or heater
1-800-283-7031

Reiker ceiling fan warranty is 1 year limited:
http://www.buyreiker.com/default.aspx?page=10

Reiker troubleshoot is zero help:
http://www.buyreiker.com/default.aspx?page=51

Troubleshoot section page 15 of manual is zero help.
http://www.buyreiker.com/manuals/ownermanual-e.pdf

Oct 23, 2012 | Reiker Dryers

1 Answer

Can this remote (hunter 27157) be paired with a fan that is already installed and has a remote. I want to use it as a backup. the remote i have is not a 27157.


I know you can use many different remotes of the 27157 model to control one receiver. There are several different reason why you may not be able to use the remote from one brand/model with another. The first is the frequency range may be different. One could be 27mhz and another could be 49mhz. Another reason is the code that is sent to the receiver by the remote to turn on the light or the fan varies from manufacturer to manufacturer and even from one model to the next from the same manufacturer. This is so there is less chance one remote/receiver commbination will interfere with another in the same location. That is why I say you will be very lucky to find an off model remote to work with your receiver.

Aug 06, 2010 | Hunter 27185 Remote Control

2 Answers

Remote doesn't operate reciever


Hello Fixya customer,

Thank you for your question.

Please determine if the "Audio" button is actually working.... after pressing the audio button, can you still control the DVD, if not then the remote has switched to the Onkyo. Although, this is not 100% conclusive, unless you have a 2nd remote to test the Onkyo with, it provides a sound basis to proceed.

Assuming the remote is transmitting and the IR receiver on the front of the Onkyo is not otherwise blocked, likely faults include the IR receiver, input to the Micro processor, and the Micro processor.

The most probable fault is the IR receiver.

Thank you for using Fixya, and if I can help you further, please let me know.

Apr 29, 2010 | Onkyo TX-DS575 Receiver

2 Answers

Light remote control stopped working


most of my fan controls have done this to me. you know the reciever is working cuz the fan works fine. you need to dis assemble the remote completely and clean the contacts for the light button. mine are two small black dots that seem to keep getting slimey and wont work till i clean them, then all works like brand new again.

good luck.

Aug 21, 2009 | Hunter 52" Ceiling Fan With Light And...

1 Answer

Remote Start on '93 Legacy Wagon Quit Working


you will have to do a number of elctrical tests to determine signal is being recieved etc.All the tests can be done with a cheap testlight'/probe.Some of the recievers/activators have internat/external fuses.The first test should be to check that the reciever/activator has a good supply of power.try that first and let me know if you need more assistance

Oct 19, 2008 | 1993 Subaru Legacy

Not finding what you are looking for?
Jada Remote Control Speed Racer Mach 5 Car RC 1:10 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jada Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

ray gallant

Level 3 Expert

41482 Answers

Are you a Jada Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...