Question about Computers & Internet

Open Question

Pixma mp198 e2

My canon MP198 shows Error 5, 'E' alternating with '5' on printer LED. It could not recognised my cartridges. I want to reset the ink counter but when i tried to eneter service mode (Press both power+ stop, release stop, press stop twice, and release both power and stop buttons), i did not get the LED to show '0'. It was just blank. I used the service tool, but i think the printer did not get the service tool's actions, even thought the page showed 'action finished.'. Please help me get into the MP 198 service mode. Thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: canon printer pixma mp110

My Pixma MP110 keep on displaying "CHECK PRINTER (5800)" Please have m to solve this problem

Posted on Mar 17, 2009

Ad
micromaster
  • 3614 Answers

SOURCE: Need Canon Pixma MP198 Driver for Mac OSX

HERE

Posted on Mar 30, 2009

komguy
  • 2306 Answers

SOURCE: have problem with my printer canon pixma mp198,

Some have posted reset instructions here, but I wouldn't do that since the ink can overflow and make a mess. You should have the absorbers replaced by a repair shop and the reset done properly.

Posted on Aug 03, 2009

xptareq2000
  • 1447 Answers

SOURCE: My Canon Pixma MP150 printer LCD shows error

It is problem any hardware is not work properly.If you are a technician please service your printer properly.Clean all surface, blowing it.when you show E2 press black or color key

Posted on Dec 28, 2009

pineworks
  • 4041 Answers

SOURCE: Current Problem on Printer """E5"""

This error means waste ink counter is full.

Solution:
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Press resume

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to enter service mode for Canon PIXMA MP198


We use these at the hospital by the hundreds and they are a real pain resetting. Make sure you are downloading the instructions specifically for your model. Keep trying it will work, takes many times to work through this. These models are a real pain. Good Luck!

Feb 08, 2014 | Canon Wireless Inkjet Photo 3-in-1

2 Answers

My printer displayed: the ink absorber is full. i then cleaned the absober but its now not displaying anything. so how best do i solve this problem?


For Canon MP190 ONLY it worked that software but I used a software named Resetter Canon MP198. First put the printer in service mode. Press and hold the RESUME button (Is the red one ), then press and hold the POWER button, wich became green.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times. Ast the first press the green power button turns off and a orange led turns on. At the second press the orange led turns off and the power became green. Now the printer is in Service Mode. So with printer conected to PCstart the software and reset the ink absorber level. It worked for me.

Oct 10, 2010 | Canon PIXMA MP190 All-In-One InkJet...

3 Answers

Canon Pixma MP198 error code 2 114 0


i got a same prob..i can't print,scan and copy and the refill warning always appeared..i hv refill the cartridge and i shut it down and try again and again..it's the cartridge prob or the printer prob..?

Feb 21, 2010 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

How to bypass the ink low level Alarm for mp198


just press the Stop/Reset button for 5 seconds .... then you can use it

Jan 06, 2010 | Canon Office Equipment & Supplies

1 Answer

Printer error


How to bypass the Alarm for Cano pixma MP198

Apr 27, 2009 | Canon PIXMA™ MP180 InkJet Photo Printer

9 Answers

Canon PIXMA MP190 reset ink?????


I have a canon printer MP190. How do I do the reset after completing my ink cartridge to the syringe?

Feb 13, 2009 | Canon PIXMA MP190 All-In-One InkJet...

2 Answers

Canon Pixma Mp150 keeps having E2 flash


Clear the EEPROM:

How to clear Error Code Canon printers MP150 MP160
CANNON Printers MP150/MP160 ERROR CODE

E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Dec 20, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...