Question about Canon PIXMA MP240 All-In-One InkJet Printer

Open Question

Scanner error code 21402

How do I check the status

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

puertobori
  • 7733 Answers

SOURCE: printer is in use or an error has occurred. Check

Uninstall and install the driver again is the best option.

Posted on Dec 02, 2010

  • 3 Answers

SOURCE: Printer is in use or an error has occurred. Check

Printer is in use or an error has occurred. Check the status. Scanner driver will be closed. Code: 2,140,2"

cannon PIXMA MP258

Posted on Feb 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannon error codes


Printer is in use or an error has occurred. check status. Scanner driver will be closed.
code 2,140,2
if scanner is not in use there is a problem using it with the USB unplugged.

May 15, 2013 | Canon PIXMA MX892 multifunction printer

1 Answer

Video of fixing MP276 canon scan error code 21402 problem


Printer is in use or error has occurred check status scanner driver will be closed

Mar 18, 2012 | Office Equipment & Supplies

1 Answer

Emmissions failed due to the following. OBD Connector Integrity - malfunction indicator light (MIL) status This is for a 2000 chevy lumina


MIL status is error codes, but usually for pre 1995 vehicles. If you check engine light was on, then it would not pass emmissions. Since your vehicle is a 2000, I would suggest you take it by an autoparts store and have them read your error codes before you try to reset them. Make sure you write them down in the order they come off their scanner.

Yu can usually clear error codes by disconnecting your battery.

Jun 27, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

Wen i try to scan my photoes an error message pops up...... SnanGear error code 2,140,2. It says printer is in use or an error has occured. Check status. Scanner driver will be closed


Stop your printer running while you are scanning photos.
It defines error because your printer and scanner running simultaneously.
Eject your printer while scanning.

Jan 07, 2011 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

Printer is in use or an error has occurred. Check the status. Scanner controller will be closed. Code: 21402"


Printer is in use or an error has occurred. Check the status. Scanner driver will be closed. Code: 2,140,2"

cannon PIXMA MP258

Jul 07, 2010 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

Scanning error - cannot scan error code 2,155,0 ???


i found this while i had the same error msg... apparently its actully the USB cable where its does not suffice
here is the link : http://www.fixyourownprinter.com/forums/printer/49111

Thanks
Sanjieev

Jan 13, 2009 | Office Equipment & Supplies

1 Answer

Fi-4120c2 error Code


Hi,

The scanner does self-diagnostic when receiving Read Command (to start scanning) and displays the result if any error or alarm is detected.

Error code-E3 in Fi-4120c2 scanner means "Light intensity check" . When this error is displayed on the scanner panel, TWAIN displays the following error-

" Irregular status is detected in scanner. If this status recurs after power cycling, please give following Sense key and ASC code to your service provider.
If ASC code is the following, please confirm following status before power cycling’
- When ASC=0x580, confirm if the shipping lock (if any) is set at “Release” position.
- When ASC=0x680, clean the sheet guide (white part) in ADF.
(Error Code DS42001)

E3 explains Optical alarm (back). This alarm occurs if the gain adjustment of the CCD amplifier does not succeed at a READ command for the first document, or during scanning.

Probable causes:
- The lamp, the optical system or white sheet guide is dirty.
- Defective lamp or CCD.
- Connector disconnected

To check and resolve the issue, lease follow the steps provided below:

1. Is sheet guide (white part) in the reading position dirty?
#Open the ADF and clean the sheet guide (white part) and the glass.
2. Is the lamp ON?
3. Are the cables damaged?
4. Are the connectors connected correctly?
#Disconnect SCSI cable and turn the scanner ON. Open the ADF and press Cover open sensor to see if the lamp lights. If not, the error is caused by the defective lamp.
5. Is the optical unit dirty?
6. Are the cables damaged?
7. Are the connectors connected correctly?
# Check and Clean (ADF back):
# Check if inside of the grass for Upper unit ASSY is dirty. Clean inside of the glass of the dust cover.
9. If the issue still persists, then you may have to replace Optical unit.

Hope the above information will be helpful.

Please revert if you have further queries.

Thanks & regards,

TechSatya

Oct 08, 2008 | Fujitsu fi-4120C Path-Through Scanner

Not finding what you are looking for?
Canon PIXMA MP240 All-In-One InkJet Printer Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...