Question about Sewing Machines
Need instructions to thread sewland over locker machine
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Although the tension units on your machine are of a different configuration, always thread from the right spool first and then each one to the left.........ONLY in that sequence !
now take a look at this sewusa site for a better view of the actual routine through the thread guides.........as I say, the tension units are different, but the sequence is the same, just use the image from above to see which one is next........this chart, just as the one on the fold down cover of your machine need to be followed one thread at a time from R to L
If you want any more help with this, just post back here, or, drop a line through the "Contact Us" page at www.bargainbox.com.au
Posted on Mar 08, 2008
I was having the same problem. I was trying to thread only that 4th one because it keep breaking. It did not stp til I rethreaded all the threads and did it worked fine
Posted on May 28, 2009
All sergers thread the same way and sergers have to be threaded in a certain order. I made a jingle out of it...
It would be best to have a tweezers handy to help with the thread and threading.
always be sure the lower looper thread goes over the top of the upper looper then out the back. I would be surprised if your thread guides are not color coded.
If you look at the top thread guides or the spools. First from left to right thread the 3rd spool, then the fourth spool. Then you thread the right needle (the second spool) then the left needle (1st spool.
The lower looper can be tricky because you have to thread it from the back of the looper to the front.
Pull the threads out the back from under the foot. Then go ahead and run it slow watching to see if it starts making a chain. It should. If not do it over again.
Posted on Aug 03, 2009
Tips for a great answer:
Feb 25, 2018 | Sewing Machines
Jan 05, 2018 | Sewing Machines
Nov 01, 2017 | Sewing Machines
Jun 01, 2017 | Sewing Machines
Apr 22, 2017 | Sewing Machines
May 29, 2014 | Janome MyLock 634D Mechanical Sewing...
Nov 29, 2013 | Sewing Machines
Sep 11, 2010 | Sewing Machines
Apr 19, 2008 | Janome MyLock 634D Mechanical Sewing...
26 people viewed this question
Usually answered in minutes!