Question about SkyScan Home

Open Question

Temp transmitter not working

Tx37u-it transmitter 88900 clock

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 88900 Atomic Clock does not read time and temperature.

Batteries must come out of both the temperature sensor (transmitter) and base (clock and temperature display). Leave out for about 4 minutes. Replace the batteries in the temperature sensor FIRST and set it about 5 - 10 feet away from the base. Replace the batteries in the base and leave them both set without touching any buttons for at least 15 minutes (usually only takes 5 minutes or so). The temperature should start to display. You can set the clock manually to the correct time and have it get the updates via radio in the evening or night. Should work after all this just fine. (have done it alot of times this way over the years)

Good luck.

Posted on Mar 31, 2009

ariftariq123
  • 56 Answers

SOURCE: Outside Temp not displaying on clock. 2nd

may the the sysrem is dameged besacue the same problem was with mine there was a resister was dameged i changed it i work perfect.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Medion md41199 atomic clock, cannot get the outdoor temp to show, how to fix please


Remove ALL batteries in transmitter AND clock.
Insert new batteries in outdoor transmitter.
Insert new batteries in the (receiver) clock.
Wait until outdoor temperature is received AND displayed on clock BEFORE setting time/date/etc.

Mar 11, 2013 | Audio Players & Recorders

1 Answer

Inability to access Farenheit readings. Model WS-9133U-IT. Freq. 915 MHz. Transmitter: TX37U


Keep in mind TX37U-IT should only be installed out of direct rain or sun. It could be heat or water damaged. The WS-9133U-IT shouldn't be at fault.

Jan 01, 2012 | Computers & Internet

1 Answer

Model 88900 skyscan atomic clock


Go to link for the manual.... http://skyscan.info/content/manuals/25-model-88900.html

Nov 13, 2011 | SkyScan 86709 Atomic Wall Clock

1 Answer

My outdoor temp will not work


if you've already cleaned the contacts and replaced the battery, your transmitter unit needs to be replaced. You can purchase a new one through the link below. If your clock's model number isn't listed, use the "Contact us" link at the top of the page.

Bill B

Apr 25, 2010 | SkyScan 86742 Digital Atomic Wall Clock

2 Answers

We replaced the batteries on our SIO SCAN temp transmitter but it still will not register the outside temperature--what do I do?


Take the batteries out of the clock AND the temp transmitter. Wait about a minute, then replace the clock batteries. Wait another minute, then replace the transmitter batteries. Once the clock synchronizes with the satellite, you will need to set the time zone and whether you want DST on or off.

Dec 08, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

88900 Atomic Clock does not read time and temperature.


Batteries must come out of both the temperature sensor (transmitter) and base (clock and temperature display). Leave out for about 4 minutes. Replace the batteries in the temperature sensor FIRST and set it about 5 - 10 feet away from the base. Replace the batteries in the base and leave them both set without touching any buttons for at least 15 minutes (usually only takes 5 minutes or so). The temperature should start to display. You can set the clock manually to the correct time and have it get the updates via radio in the evening or night. Should work after all this just fine. (have done it alot of times this way over the years)

Good luck.

Mar 20, 2009 | SkyScan 86709 Atomic Wall Clock

2 Answers

I have a skyscan atomic clock, model 88900. I've absoltely LOVED it until the outside temperature quit being displayed. I have changed the batteries 2x's according to the instructions and have used NEW...


This is a very common problem that is most frequently caused by the outdoor transmitter going bad. They are surprisingly delicate and don't like getting wet.

You can order replacement transmitters from http://skyscan.info/content/

They only cost $11 and that includes shipping and handling.

Jan 25, 2009 | Audio Players & Recorders

2 Answers

Outside temp on skycam atomic clock


Try changing the battereis in the CLOCK. When the batteries in the clock start getting low, the clock does not pick up the outside transmitter.

Nov 10, 2008 | SkyScan 86742 Digital Atomic Wall Clock

8 Answers

Temperature Transmitter


You need new SioScan Temperature Transmitter 433 MHz. Take a look on amazon La Crosse Technology TX6U Wireless Temperature Sensor for 433 MHz units.... Hope this was helpful. cheers
temperature-transmitter-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg

Oct 16, 2007 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
Home Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Rick Goldsmith
Rick Goldsmith

Level 1 Expert

16 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...