Question about Binatone Lands Phones

Open Question

Tam not receiving incoming messages

TAM not recording incoming messages. Answers call with recorded message but does not leave

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 32 Answers

SOURCE: Vtech ia5874

You have the answering machine set to announce only.

Press the menu button repeatedly until you hear the phone say "set announce only" Press the change button twice The first time tells you the current setting which is "on" the second time turns it off.

Posted on Oct 02, 2008

cosatto
  • 29 Answers

SOURCE: Short recording time

The unit should have the option to make the video size larger within the settings of the camera. Change this and the recording will be longer.

Posted on Dec 11, 2008

  • 1 Answer

SOURCE: AT&T E5965C phone answering machine does not record incoming mess

My E5965C dosenot record in comi8ng messages.

Posted on Jul 10, 2009

consultel1
  • 860 Answers

SOURCE: How do I reprogram the incoming message?

press one of the ports for the voice mail (on the right of the handset)
when prompted to enter your password enter **789#
the prompt should say enter function
enter 405# the greeting should start playing
either press # to confirm or re record the greeting
when finished recording the day and night (if required)greetings press # until the prompt says enter function
enter 111# to exit programming2.gif

Posted on Nov 05, 2009

cnavarro
  • 2460 Answers

SOURCE: Can you set the answering machine to answer with a

On page 42 or so of your manual, there is a Greeting Only option MENU 0 6 2, where you can adjust the message length or set the G.O. option.

Carl

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to record the answering message?


Follow the instructions in the second column of the first page of the manual.

May 07, 2012 | Sony TAM-100 Telephone Answering Machine

1 Answer

"A" displayed and will not record caller's message


Your answering machine is set to "announce." In this mode it can announce that you're not available to take the call but will not record a message. The machine automatically switches to this mode when its memory is full.
If the memory is not full, you can switch from the "announce" mode to the "answer" mode by pressing the [ANSWER ON/OFF] button until it lights up in red.
If you need a manual, you may view one here.

Dec 10, 2011 | Sony TAM-100 Digital Answering Machine

1 Answer

Trouble shooting


You're in the Announce mode, where the machine plays an announcement but does not record a message. It switches to this mode automatically when memory is full. If the memory is not full, you can switch between the Announce and Answer modes by pressing the [ANSWER ON/OFF] button. You're in the Answer mode when the button lights up red.

Dec 10, 2011 | Sony TAM-100 Digital Answering Machine

1 Answer

Recording a greeting


Hi,

You need to be in Tam fax mode firstly.

1, {#} {0} {0} {1}:= “TAM/FAX” (default)

2,
Press {RECORD} repeatedly to display “TAM GREETING”.

3,
Press {SET}. A long beep will sound.

4
Speak clearly about 20 cm ( 8 inches ) away from the microphone.

The display will show the remaining
recording time.

5 When finished recording, press {STOP}.
The unit will repeat your message.


To erase and start again

Tam/fax mode again.

2 Press {ERASE} repeatedly to display “TAM GREETING”.

3 Press {SET}.

To cancel erasing, press {STOP}.
4 Press {SET}.


should be good now.

Regards
Richard.

Apr 24, 2009 | Panasonic KX-FPG376 Plain Paper Thermal...

1 Answer

How do I retreive messages from outside phone?


It's located on the far right side of the first page - - - scroll down a little bit, it's in there just below "Recording a memo"
Hope this helps - Here is the address for the page if you need it
http://esupport.sony.com/US/perl/model-documents.pl?mdl=TAM100&LOC=3

Thanks
Len

Feb 25, 2009 | Sony TAM-100 Digital Answering Machine

1 Answer

Short recording time


The unit should have the option to make the video size larger within the settings of the camera. Change this and the recording will be longer.

Dec 11, 2008 | Lands Phones

1 Answer

Problem with answering machine on Panasonic Model # KX-FPG376


i followed the advice posted & it worked fine after that. thanks.

Nov 22, 2008 | Panasonic KX-FPG376 Plain Paper Thermal...

2 Answers

FAX JX500


Mary:

Given that the last question I responded to for you related to a Fax JX200 - and this to a JX500 - I am not certain which model you are actually asking about. The information that follows relates to the JX500. Further, if you need information in this regard on the prior post in order to feel that the previous response was a FixYa level response, please let me know. I responded based on the information you provided...

Based on the fact that you are getting a constant 5-ring situation, it appears that the machine is in TAM (tel-ans mach) mode. The purpose of 5 falls into remote recovery of messages - toll saver results in the phone answering after 2 rings if there are messages to retrieve, and 5 if there are not. This is done to prevent long-distance charges if there are no messages.

Two ways to accomplish an 8-9 ring objective. (1) Place the machine in manual mode, which means answering every call and sending faxes to the machine. Additionally, a "fail-safe" on this mode is that it will switch to TAM/automatically answer (if there is a recorded greeting message) after 15 rings - below. (2) The incoming ring - ring count - can be set (under Fax/Tel Auto) to ring 10 to 60 seconds before the fax picks up. (3) Alternatively, the Incoming Ring ring count can be set to have the fax ring 2 to 30 times, depending on the country specific parameters.

Re TAM: When the fax is set to <MANUAL MODE> and <MAN/AUTO SWITCH> has been set to <OFF>, TAM MODE will be activated if the fax rings 15 times and the call is not answered (only when an outgoing message has been recorded). When the call is disconnected, the fax returns to <MANUAL MODE>.

If this information assists you in resolving the problem, please take a moment to rate the solution at a "FixYa" level. If you do not feel that you can rate at a "FixYa", please post back with more information regarding your specific needs, and I will gladly help you until we have reached a definitive solution. Thank you for using and rating FixYa!

Aug 04, 2008 | Canon FAX-JX200

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Binatone Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

ray gallant

Level 3 Expert

43003 Answers

AJMAL KHAN

Level 2 Expert

382 Answers

Are you a Binatone Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...