Question about Mintek MDP-5860 Portable DVD Player

Open Question

Laser on my mnitek MDP-5860 dvd player don't work

Can I use a cd player laser as a replacement to fix my Mnitek MDP-5860 DVD player

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: cannot disconnect battery from "mintek

I PUSHED THE RELEASE BUTTON ON THE BACK OF DA UNIT AND THE BATTERIE SLID OFF....IM SORRY WHEN A COIMPANY GOES OUT OF BUSINESS I DONT FEEL I SHOULD HAVE TO PAY FOR ADVICE....I UNDERSTAND CAPITOL GAIN FOR "YOUR EXPERTS" BUT THAT DOESNT MAKE IT RIGHT.....IT COST ME MOR FOR ADVICE THAN I PAID FOR THE UNIT......AND THAT I CANNOT JUSTIFY....THXS FOR NOTHING

Posted on Jul 16, 2008

SOURCE: Mintek MDP-1770 Portable DVD is not powering up

Change the battery

Posted on Aug 12, 2008

A3sthetix
  • 41 Answers

SOURCE: Missing AC adapter

If you look at your DVD player, it will have information such as 5V, 2.2A. This information will help you choose the correct AC adaptor. Head over to The Source, FutureShop, BestBuy, etc and bring the DVD player in.

As for a universal AC adaptor. These range from $15 - $50. Just make sure the one you get has the correct plug and voltage/amp range and polarity for it. The salesperson should be able to help.

Here is a picture of such an adaptor. This is a picture of the back of an electronic device, showing 5V and the polarity. If your player has no information with the AC port, you will need to look for a label on the device with this information.

Posted on Dec 01, 2008

  • 303 Answers

SOURCE: Need replacement car power chord Mintek DVD MDP-5861

You can buy a new car adapter by clicking on the hyperlink:
buy replacement car adapter power charger cord for MINTEK MDP-5861

Posted on Jun 02, 2009

  • 814 Answers

SOURCE: Dvd player not reading disk

With the power turned off, open the DVD Player, and then open the top where you load the DVD into the player. Locate the laser lens and notice that the laser is attached to a transport assembly that moves the laser diagonally outward in a slot. 1. Slide this assembly outward to the end of its track. 2. Slide the assembly back inward to the closest inward position. 3. Repeat the process of sliding the assembly outward and then back inward.4. Put in a music CD and let it play all the way through. This helps to calibrate the laser head assembly movement. When the music CD is finished playing. 5. Put in a DVD, and you should have a working unit again This is a factory solution from Mintek that was given to a customer who ask for help with the forever loading disc problems. This solution may work on other models of portable DVD players. Most portable DVD players use this type of transport mechanism. Try this solution it might work for you.

Posted on Jun 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need cords


It should have the following connections:

Analog audio out;
Optical digital audio out
Composite-video out
Headphone jack

If you want to conntect the player to a tv use a RCA cable and connect it to the input on the TV

Mar 08, 2011 | Mintek MDP-5860 Portable DVD Player

1 Answer

No disc error


With the power turned off, open the DVD Player, and then open the top where you load the DVD into the player. Locate the laser lens and notice that the laser is attached to a transport assembly that moves the laser diagonally outward in a slot. 1. Slide this assembly outward to the end of its track. 2. Slide the assembly back inward to the closest inward position. 3. Repeat the process of sliding the assembly outward and then back inward.4. Put in a music CD and let it play all the way through. This helps to calibrate the laser head assembly movement. When the music CD is finished playing. 5. Put in a DVD, and you should have a working unit again This is a factory solution from Mintek that was given to a customer who ask for help with the forever loading disc problems. This solution may work on other models of portable DVD players. Most portable DVD players use this type of transport mechanism. Try this solution it might work for you. I hope this information helps you with your problem.

Apr 22, 2009 | Mintek MDP-1810 Portable DVD Player

1 Answer

Dvd player not reading disk


With the power turned off, open the DVD Player, and then open the top where you load the DVD into the player. Locate the laser lens and notice that the laser is attached to a transport assembly that moves the laser diagonally outward in a slot. 1. Slide this assembly outward to the end of its track. 2. Slide the assembly back inward to the closest inward position. 3. Repeat the process of sliding the assembly outward and then back inward.4. Put in a music CD and let it play all the way through. This helps to calibrate the laser head assembly movement. When the music CD is finished playing. 5. Put in a DVD, and you should have a working unit again This is a factory solution from Mintek that was given to a customer who ask for help with the forever loading disc problems. This solution may work on other models of portable DVD players. Most portable DVD players use this type of transport mechanism. Try this solution it might work for you.

Feb 21, 2009 | Mintek MDP-1770 Portable DVD Player

1 Answer

Screen comes on, disk turns, loading starts, and doesnt stop


With the power turned off, open the DVD Player, and then open the top where you load the DVD into the player. Locate the laser lens and notice that the laser is attached to a transport assembly that moves the laser diagonally outward in a slot. 1. Slide this assembly outward to the end of its track. 2. Slide the assembly back inward to the closest inward position. 3. Repeat the process of sliding the assembly outward and then back inward.4. Put in a music CD and let it play all the way through. This helps to calibrate the laser head assembly movement. When the music CD is finished playing. 5. Put in a DVD, and you should have a working unit again This is a factory solution from Mintek that was given to a customer who ask for help with the forever loading disc problems. This solution may work on other models of portable DVD players. Most portable DVD players use this type of transport mechanism. Try this solution it might work for you.

Feb 01, 2009 | Mintek MDP-1770 Portable DVD Player

2 Answers

Missing AC adapter


If you look at your DVD player, it will have information such as 5V, 2.2A. This information will help you choose the correct AC adaptor. Head over to The Source, FutureShop, BestBuy, etc and bring the DVD player in.

As for a universal AC adaptor. These range from $15 - $50. Just make sure the one you get has the correct plug and voltage/amp range and polarity for it. The salesperson should be able to help.

Here is a picture of such an adaptor. This is a picture of the back of an electronic device, showing 5V and the polarity. If your player has no information with the AC port, you will need to look for a label on the device with this information.

Dec 01, 2008 | Mintek MDP-5860 Portable DVD Player

3 Answers

Missing part


Charger does't connect to DVD player.

Connects to battery. Built your own, Radio Shack, female to male jack, power supply from anything handy or spend $2 at thrift shop, $2 multimeter (Harbor Freight, Cheapo), junk variable resistor (pot).

7.4--8 V adjust. Or, get fixed value resistor dependent on PS voltage.

Charge anything,

And power supply for DVD house current.

Jomayan1@gmail.com

Sep 14, 2008 | Mintek MDP-5860 Portable DVD Player

1 Answer

Mintek Portable DVD Player MDP 5860, picture do not come up on screen.


no sound in my laptop IBM T30 also problem in downloading as it is getting blocked by firewaqll

Aug 22, 2008 | Mintek Televison & Video

2 Answers

Mintek mdp-1720


http://www1.epinions.com/content_209566011012

Try this link from someone with the same problem, and a possible solution. It is simple & got my player working albeit temperamentally.

Jun 07, 2008 | Mintek MDP-1770 Portable DVD Player

Not finding what you are looking for?
Mintek MDP-5860 Portable DVD Player Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...