Question about Sewing Machines
I used my machine one evening and left it on while I went to do something else...then I turned it off...when I turned it back on it started making a beeping sound and the screen is dark
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to make sure that the embroidery arm is able to move freely be sure that it has no obstructions like a wall behind your sewing table or fabric that may be stacked nearby. If all is clear you probably have thread wrapped somewhere inside the embroidery unit it only take a little bit to jam up the works. You can try to take off the cover by flipping the unit over and removing the screws to the embroidery arm. I would take it to the shop where you bought it they should be able to help you for free if it is new. If you have the original packaging you can send the machine to Steve's at www.stevessewandvac.com just send them an email they can help.
Posted on Aug 13, 2008
Try rethreading the machine, and make sure the thread is not wrapped around anything. Then check the tension for the needles. Run a few inches of chainstich off slowly, while watching the thread and loopers make the loops over the finger. Your threads may be in the wrong position, or underneath the wrong parts to start.
Posted on Jun 12, 2009
Have you reset the tensions for this machine, look in your manual and follow directions. If this is an Elegante there is also a set of instructions on the machine. On the LCD screen there is a picture of a sewing machine with a question mark, touch it, find Troubleshooting and touch that then find the problem you are having and read. If this does not help take it to a Brother dealer and have it reset so as to keep you machine in good running order.
Posted on Jul 07, 2009
You probably have a jam. Start digging under the bobbin area.
If you get it all cleaned up under there... and it still won't move. Time for service by a pro. Could be something horrid like a bent shaft.
Posted on Nov 03, 2012
Tips for a great answer:
Nov 27, 2016 | Baby Lock Sewing Machines
Jan 03, 2016 | Sewing Machines
Jul 05, 2015 | Baby Lock Ellure
Jun 09, 2015 | Baby Lock Esante
Sep 04, 2013 | Sewing Machines
Aug 23, 2012 | Baby Lock Esante
Jul 05, 2009 | Baby Lock Ellure
Feb 28, 2009 | Baby Lock Esante
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: