Question about Canon BJC 80 InkJet Printer

1 Answer

Error light & 7 beeps

My trusty old Canon BJC-80, which has worked fine for 10 years, has suddenly seized. The paper feeds part way through and then the error light comes on and 7 beeps sound. Turning the printer off finishes feeding the paper through but no computer generated cleaning works, nor manual test printing. Help. I'm in the mountains of nepal!

Posted by on

  • 1 more comment 
  • Betty Taylor Oct 04, 2008

    My trusty Canon BJC-80, which has worked fine for 2 years, has suddenly seized. The paperwill not feed through and then the error light comes on and 5 beeps sound and I will press the cartridge and it will not come over at all. Turning the printer off and on will not even feed the paper through but no computer generated cleaning works, nor manual test printing. Help. I'm in the mountains of nepal!

  • Betty Taylor Oct 04, 2008

    My Canon BJC-80, which has worked fine for 2 years, has suddenly seized. The paper will not feed through and then the error light comes on and 5 beeps sound. The carttridge will not come over when I press it. Turning the printer off and on will not even feed the paper through but no computer generated error, nor manual test printing will work. Help. I'm in the mountains of nepal!

  • Anonymous Mar 18, 2014

    It was working fine, until I added more paper, it won't even work when I hand feed it, but the light comes on so I know it isn't that.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 1,113 Answers

Geez, going back in time,but it is a print position fault, head is not traveling correctly , make sure rail is lubed and carriage can move back and forth without obstruction,


 

Posted on Oct 26, 2007

  • 1 more comment 
  • Soulvisitor
    Soulvisitor Oct 26, 2007

    I dont think this will help but...procedure for rest of waste ink count..

    Waste Error Reset

    1: Unplug Power Cord
    2: Hold POWER and RESUME buttons
    3: Plug in Power Cord
    4: Release buttons after the printers starts up
    5: Hold CARTRIDGE and RESUME
    6: Press POWER
    7: Release all buttons after the beeps
    8: Press CARTRIDGE 16 times
    9: Press RESUME
    10: Unplug the Power cord

  • Soulvisitor
    Soulvisitor Oct 26, 2007

    error codes p1








    Off


    Off


     


    No Power


     



    On


    Off


     


    Ready


     



    On


    On


    1


    Paper Pickup Error or out of paper


    Add Paper or clear paper jam and press the RESUME button



    On


    Blinks


    1


    Low Ink Warning


     



    On


    On


    2


    Paper Jam


    Clear paper jam and press the RESUME button

    Off

    Off

     

    No Power

     

    On

    Off

     

    Ready

     

    On

    On

    1

    Paper Pickup Error or out of paper

    Add Paper or clear paper jam and press the RESUME button

    On

    Blinks

    1

    Low Ink Warning

     

    On

    On

    2

    Paper Jam

    Clear paper jam and press the RESUME button

  • Soulvisitor
    Soulvisitor Oct 26, 2007

    sorry having trouble pastin it. but error reads



    power and error light blinking and 7 beeps is a print position error

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

BJC-85 canon printer.....brand new cartridges both b&w and color. Error light chimes 8 times and won't print


1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord

4: Release buttons after the printer starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beep
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord

Aug 07, 2010 | Canon BJC-85 InkJet Printer

1 Answer

Green light flashes, will not print. Checked all


Hi can gave you the truble codes
  • Light Orange - 2 beeps: Remove any paper jammed
  • Light Orange - 3 beeps: Remove any paper jammed
  • Light Orange - 4 beeps: Add Ink
  • Light Orange - 5 beeps: Re-install cartridge or replace it
  • Light Orange - 6 beeps: Re-install cartridge or replace it
  • Light Orange - 7 beeps: Re-install cartridge or replace it
  • Light Orange - 8 beeps: Waste is almost full
  • Flash 1 x Orange - 10 beeps (error code 6100): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 2 x Orange - 10 beeps (error code 6300): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 3 x Orange - 10 beeps (error code 6800): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 4 x Orange - 10 beeps (error code 5100): Make sure nothing is blocking the cartridge movement, if not requires service.
  • Flash 5 x Orange - 10 beeps (error code 5400): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 6 x Orange - 10 beeps (error code 5B00): Waste full (make a reset)
  • Flash 7 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 8 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 9 x Orange - 10 beeps (error code 5600): Replace the BJ Cartridge(Printhead) or reinstall it
  • Feb 01, 2010 | Canon BJC 4400 InkJet Printer

    2 Answers

    Canon BJC 80 - Is it beyond repair


    Three beeps means the print head is bad. They last 5-10 years. They are available as high-capacity black BC-10, or color, BC-11e. I occasionally sell them on ebay for about $20, user id yacare. If not currently listed, use contact seller to request one.

    Dec 25, 2009 | Canon BJC 80 InkJet Printer

    1 Answer

    BJC-8200 beeps 10 times and wont go online.


  • Hi
  • Flash 7 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 8 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 9 x Orange - 10 beeps (error code 5600): Replace the BJ Cartridge(Printhead) or reinstall it
  • All The Best: Pineworks
  • Oct 06, 2009 | Canon BJC 8200 Photo InkJet Printer

    1 Answer

    Resume light flashes and beeps. Lost its mind and


    Try this:


    F14 Error Reset

    1: Unplug adapter
    2: Hold POWER
    3: Plug in ADAPTER
    4: Release POWER after printer starts
    5: Hold FF and MENU and press POWER
    6: Release after beeps
    7: Press <> Cartridge until 1D is displayed
    8: Press ONLINE
    9: Press POWER to shutoff printer
    10: Unplug printer then replug printer

    Jun 15, 2009 | Canon BJC 80 InkJet Printer

    1 Answer

    Canon BJC-80 printer. Green power light and error lights flash


    have you tried replacing the printheadthat is what it sounds like

    May 05, 2009 | Canon BJC 80 InkJet Printer

    1 Answer

    Error and power light blinking.


    Here is the Waste Tank Full reset.

    Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70 
    1: Unplug Power Cord
    2: Hold POWER and RESUME buttons
    3: Plug in Power Cord 
    4: Release buttons after the printers starts up 
    5: Hold CARTRIDGE and RESUME 
    6: Press POWER 
    7: Release all buttons after the beeps 
    8: Press CARTRIDGE 16 times 
    9: Press RESUME 
    10: Unplug the Power cord

    Mar 30, 2009 | Canon BJC-85 InkJet Printer

    1 Answer

    My canon bjc 80 wont print and error light continually flashing


    Indicates Waste Ink Full error

    To repair follow the steps below
    1: Unplug Power Cord
    2: Hold POWER and RESUME buttons
    3: Plug in Power Cord
    4: Release buttons after the printers starts up
    5: Hold CARTRIDGE and RESUME
    6: Press POWER
    7: Release all buttons after the beeps
    8: Press CARTRIDGE 16 times
    9: Press RESUME
    10: Unplug the Power cord

    Mar 28, 2009 | Canon BJC 80 InkJet Printer

    1 Answer

    Not printing from one computer


    If the CHARGE/ERROR light is remain on orange with beep 1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly.
    If the POWER light is flashing green, that mean your print job is not finish yet.

    YBC (/\)

    Dec 15, 2008 | Canon BJC 55 InkJet Printer

    1 Answer

    Error problem on Canon BJC-80


    Try this:
    1: Unplug Power Cord

    2: Hold POWER and RESUME buttons

    3: Plug in Power Cord

    4: Release buttons after the printers starts up

    5: Hold CARTRIDGE and RESUME

    6: Press POWER

    7: Release all buttons after the beeps

    8: Press CARTRIDGE 16 times

    9: Press RESUME

    10: Unplug the Power cord

    Jan 17, 2008 | Canon BJC 80 InkJet Printer

    Not finding what you are looking for?
    Canon BJC 80 InkJet Printer Logo

    255 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    old marine
    old marine

    Level 3 Expert

    2098 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...