NEED MANUAL FOR CONNECTLAND WEBCAM - Cameras

It is standard for 4 screws to be holding the hard drive in. Maybe there is a plastic tab somewhere holding it in

Look for a 3.5 mm microphone port on the computer. Usually the port on the back of the desktop will have a pink surround. (There will be other ports there; the usual minimum are the green port for speakers and blue one for line-in.) Put the 3.5 mm jack on the end of the cord on the microphone into the port. If you have an add-in sound card, use the microphone port on the sound card.

Some machines will also have a front panel microphone port. This will have a small mike icon next to the port.

Next you need to ensure that the audio device is set to Microphone. For Windows systems (Vista/7/8), enter the Control Panel and go to the Hardware and Sound panel. Click on Manage Audio Devices under Sound. Then click on the Recording tab. Check if the microphone listed as plugged in. Make this the default recording device. (XP has a slightly different name for the panel.) For XP through Windows 7, click on the start button and then find the Control Panel listed on the right. For Windows 8, from the desktop, press the Ctrl and X keys at the same time. Then find the Control Panel in the list. (Alternatively, activate the Charms menu, Ctrl+C or hover on the upper right of the screen. Move down and click on the gear (Settings). Then select the Control Panel.)

If the computer doesn't indicate that the microphone is plugged in, make sure that the 3.5 mm plug is in the correct port. Next try the microphone on another computer. The audio card port could be damaged or the microphone cable could be faulty. If the microphone works on another computer, you can try a USB audio adapter (StarTech ICUSBAUDIO or similar) or a new sound card. (Note: some older sound cards do not work properly on newer versions of Windows. If you have a sound card installed and the motherboard has an on-board audio device, remove the sound card. Enable the on-board audio in the computer's BIOS. Install the appropriate audio drivers. Try that audio device. Accessing the BIOS will depend on computer. Often you can press Esc, F1, F2, F10 or Delete repeatedly after you turn on the computer. If Windows starts to boot, turn off the system and try again.) If another computer doesn't recognize the microphone, I'd recommend a new microphone. Fixing the cable isn't worth the effort.

I hope this helps.

Cindy Wells

Go on line search manufacture if your hub and check for laters drivers and then delete and reinstall software or just new drivers, also check by going to start menu look for control panel look for device manager select it , then scroll down list till you see USB devices , look at usb icon host controllers and see if there's is a failed icon symbol beside your USB icon like a red or yellow exclamation mark or an x

1st You download Webcam Driver.
I need a manual for StarCam 370i
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

1st You download Webcam Driver.
Need to download user manual for sbt-wcck webcam
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

you might have some luck here.
http://www.jascoproducts.com/support/software-downloads.asp#pccams

and the manual
http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/98066-Manual-Eng.pdf

This is the closest manual i could find for it on the manufacturers website. It should walk you through everything you need.

www.mgae.com/products/manuals/WebcamIM366560.pdf

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&cat=PC_CAMERAS_CA&sct=WEBCAMS_SU&session=20090220181103_58.167.42.37&grp=PC_PRODUCTS_GR&ctn=SPC1300NC/27&mid=Link_UserManuals&hlt=Link_UserManuals

Adobe Reader if needed, download and install
http://www.adobe.com

Manual
http://www.zkapple.org/downloads/drivers/webcam/manual.pdf

POSSIBLE Driver site
http://www.softsci.com/veodrivers.htm