Question about Remote Controls
My son has a Jenson All in one remote that the battery died and he lost the directions with all the codes to program it. He has a Magnavox TV. Where can I find the code and how to program this remote?
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Posted on Dec 30, 2007
SOURCE: Jensen (143307) Remote Control
Turn on your tv manually. (without remote)
Hold on to the (tv) button and on/off button for the same time for 3 secs.
On/off button will light up.
Push on/off button until the tv turns off. (1x-10x)
Then push the stop button on the bottom of the remote to save.
Posted on Feb 05, 2008
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jun 20, 2008
Tips for a great answer:
Mar 13, 2010 | Jensen JR400 Remote Control
Nov 19, 2009 | Jensen 143307 Remote Control
May 28, 2009 | Jensen JR400 Remote Control
Aug 22, 2008 | Jensen JER-323 Remote Control
Mar 19, 2008 | Jensen JR500 Remote Control
Mar 18, 2008 | Jensen JER-323 Remote Control
427 people viewed this question
Usually answered in minutes!