I have an old washing machine; Hotpoint Microprofile 1400 - 5964
It exhibited error code E20 at the end of a wash whilst draining off and still shows it after being turned off, left overnight and turned on again. The washing machine still sounds like its trying to drain when turned on.
Thank You.
My washer is WMD940p it is just gone over a year old now when you switch on the power to the machine...
(More)
My washer is WMD940p it is just gone over a year old now when you switch on the power to the machine it make a load noise i think it is the door lock and when you select a cycle and press start it fills for 1 second then does nothing no error code. all the parts on the machine work like the pump and the motor because the drum moves still but only for 2 seconds. PLEASE COULD SOMEONE HELP BECAUSE NEED TO USE WASHER BECAUSE IT IS CHRISTMAS!!!!
my waterpump clicks (turning the impellor by hand )is that normal or should it turn easily .it works...
(More)
my waterpump clicks (turning the impellor by hand )is that normal or should it turn easily .it works fine but very noisy hotpoint wma35
i have a tv e-tech, that is blocked now. firts: the screen appears "factory", later is...
(More)
I HAVE A TV E-TECH, THAT IS BLOCKED NOW. FIRTS: THE SCREEN APPEARS "FACTORY", LATER IS BLOCKED WITH THE CONTROL. NOW IS BLOCKED AND SCREEN IS DIVIDED FOR TWO LINES IN FORM OF CROSS. THAT HAVE SOLUTION. PLEASE HELP ME.