Question about Nikon Nuvis S APS Point and Shoot Camera

1 Answer

Steel cover Nuvis S

Can't locate film!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Steel cover Nuvis S

The film slot is opened by twisting the "knob" on the end of the camera in the direction indicated by the arrow.

Posted on Apr 05, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The flash sometimes doesn't work and prints out white film

Hi, once you insert the new pack of film, first shot is without flash as it's eject the film cover which is a useless film cover that cover the film protect the film being exposed. after first shot, camera will have flash. but do not open the film cover again. if you open and take out the film it will expose to light and film turn out to be white.

Apr 13, 2014 | FUJIFILM Instax 210 Film Camera

1 Answer

The film comes out all blank when I take a picture on my Fujifilm instax 210. What do I do?

try take 10 shot without any films insert to the camera.
If there is flash mean camera is working in goods condition.
It will appear black because someone had open the film cover before, therefore , it detect it's a new film box, and eject the first film cover.
film will appear black.

Sep 23, 2013 | FUJIFILM Instax 210 Film Camera

1 Answer

Is there supposed to be a memory chip or flip for this camra and if yes where does it go

No. It's a film camera and takes APS film which is no longer made, remaining stocks are getting more awkward to find now, they're all long out of date, and even if you can buy film it's now getting difficult to find companies able to process it.

Sep 23, 2011 | Nikon Nuvis S APS Point and Shoot Camera

1 Answer

I have made a mistake when loading film into my holga 135bc. According to the manual book, after I had insert the tip of the film tongue into the slot on the take-up stool, I had to snap the back cover...

If you're saying that you have accidentally wound the film leader of an unused film back into the canister, then you need a film leader retriever (also known as a leader picker).

The tool costs typically around £6 plus shipping, so it's usually cheaper just to buy another film, but if you ask nicely at a camera shop (not many of those left!) then if they have one they might help you for free. Especially if you're buying stuff like films/processing from them.

Jul 09, 2011 | Holga 135BC Film Camera

1 Answer

On the 120 and 220 film backs for the 67 pro s there is red dot that can be covered or uncovered i have forgetton what that does, can you help

I believe you're talking about the multi-exposure switch, located just above the wind lever on the film back? Red dot visible, multi-exposure (or firing without film) possible, covered vice-versa.

Feb 07, 2011 | Instant Cameras

1 Answer

I need the manual for the Nuvis 110i. The camera

You can download a copy from here by the looks of things (registration required)

Sep 21, 2009 | Nikon Nuvis 110i APS Point and Shoot...

1 Answer

Disney princess camera


bottom of camera open battery cover with a pen point, insert one AA battery close cover.
film door is opened with pen point left side of film door. load film & bring film leader to take up spool, close film door. rotate advance to # 1 counter on bottom.
turn camera on with sliding switch on front of camera, this opens lens cover and turns on flash .( if wanted ) second click.
at end of film roll pull rewind lever up and rotate clock-wise to rewind film.
open film door and remove film.
remember to turn camera off when not using.

Aug 05, 2008 | Instant Cameras

1 Answer

Canon FTb 1974

I used to use a Canon older than yours. So I'm guessing it might have the same construction. The film advance knob may have a small holding pin or it is just out of it's correct position. If you can feel the knob and see if you can hook the pin back on then your problem is partially solved. If that doesn't work a techncian would probably dismantle the camera from the top as well as from the hinge. It can be fixed but I'm not sure if the fixing will be cheap. I'm a handyman of sort so I would try to unhinge the pin (other side of the knob) and use a flashlight and a long thin wire to see if I can unclip the side that is hooked to the knob. Either way, this is not going to be easy and you need to be careful not to scratch(at least minimize) the inside of the camera or damage any part of the shutter. This is almost like a doctor doing brain surgergy so if you don't have a steady hand and even temper don't try it. It's not going to be easy. Usually the back cover has the hook and the advance knob has the flat metal sheet that holds on to the cover's hook. If you can pull this metal sheet up, that should release the back cover. You'd have to use a strong wire or paper clip. Not the copper types but the stainless steel ones and use a long nose plier to create a hook.

Jul 18, 2008 | Instant Cameras

Not finding what you are looking for?
Nikon Nuvis S APS Point and Shoot Camera Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Instant Cameras Experts

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 3 Expert

93738 Answers

manhal kurdi

Level 2 Expert

80 Answers

Are you a Nikon Instant Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides