Question about HP Photosmart C7180 All-In-One InkJet Printer

1 Answer

OXC : stoped printing

OXC: stoped printing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers
Re: OXC : stoped printing

OXC? what would that mean, by chance? Is that an error code?

Posted on Feb 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Error Oxc 18a00001

you may need another print head with that error code message. I would contact HP Total Care (1800-474-6836) and check to see if your printer or print head is in warranty, and it could be replaced.
Error 0xc18a0001

Jan 20, 2016 | HP Photosmart D7260 Printer

1 Answer

My HP Photosmart All-in-one 3210 will not print. The last error message says service product. Earlier I got error message oxc 18a0401 and Ink System Failure. It will not copy or print. It will scan. Is...

You can reset it by unplugging it an leaving it unplugged overnight. Then, plug it in and restart it. This may sound crazy, but could you be out of ink, or the ink cartridge may be bad. Would need more info to advise properly, such as; what were you doing when the error happened, what was the last thing you did directly before this as far as printing goes, and could a file in your program been corrupted:? Please try the simple things, then let us know, ok? Good Luk!

Jan 05, 2011 | HP Photosmart 3210 Printer

1 Answer

Error Oxc 18a 0207

Please click on the following link to resolve the issue
This is a particular issue when the printing system of the printer goes bad

Hope it works for you..
All the best

Oct 28, 2010 | HP Photosmart C7180 All-In-One InkJet...

1 Answer

Will not print. Displays "Error Oxc 19a0035

Kinldy remove printer, uninstall and then reinstall the prrinter software, then connect the printer and test.
If there is mating of the printer and shows a errror, Just check on the rollers, the ink head drive section for any paper or restriction to the movement of the mechanism.
If there is not result, the main board can be faulty.

Sep 05, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Error code Oxc 18a 0007 appears and can not print


The "Ox18" series errors can be removed by resetting the printer. Unplug the USB cable from the printer, remove the ink cartridges. When the "Insert ink cartridges" message appears unplug the power cord from the printer. Wait 1 minute (at least), then reconnect the power cord and turn on the printer if it didn't come on by itself. Reinsert the ink, close the unit and print a calibration page if prompted to do so. Finally reconnect the USB cable to the printer. If this doesn't work, the unit needs service (or replacement if the service call will cost more than a new printer).

Thank you!!

May 19, 2010 | HP Photosmart 3210 Printer

1 Answer

Hp printer error oxc a8a0201


The 'ink system failure' error is caused by air in the ink feed tubes. This happens if you use poorly filled refilled cartridges or you let the cartridge run all the way to empty and the printer sucks air into the system. You will need to purge the air lines to correct the error. We have a step by step guide to do this in an article posted on our services page at: You should be back up and printing in about 10 minutes.

I hope this helps, if so please rate our solution.

Corporate Computer

Apr 15, 2010 | HP Photosmart C7180 All-In-One InkJet...

1 Answer

HP printer hp D7163 error:OXC 18a 0205

this is beacuse of 2 reasons
1)printer internal firmware corrupt
2)ink system failure

try this
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer

Oct 25, 2007 | HP Photosmart C7180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C7180 All-In-One InkJet Printer Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93738 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides