Question about Samsung HCN4226W 42" Rear Projection HDTV-Ready Television

1 Answer

Samsung SP43W6HPX\XEU Rear projection

Can you help,

When i switch on TV red led blinks 10 times have no sound.

after 20 mins sound comes off and on and eventually works fine then dissapears.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

HLP, HCN HL-S The Start-up Problem or/and
3 LEDs in the front blinking.

Unplug the set, pull out the lamp module (not all the way - leave it on the track) and push it back in.

Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Posted on Feb 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Having trouble with samsung projection tv / sp43w6hpx/xeu. done manual convergence and got the picture and colour nearly right but across the top half the tv the picture is bend upward/ what kinda part...

Look for 2 big black ICs they will have the Part number on them,example STK392-110
Mats Electronics has them replace Both ICs. 1-800-628-1118 also in front of ICs is 2 resistors low ohm 2.7 or 3.9 replace them.

Mar 01, 2011 | Samsung Televison & Video

1 Answer

The screen went black. Last time I changed the bulb and it started working. This time the TV did not come back. The screen is black. The center Green light and the bottom red light blink. Samsung 567W

Make sure properly connected and tightly sure cover put on and screws in,if change projection bulb,still blinking "LAMP" LED indication light.But,if "LAMP"LED indication flashes and making clicking noise.Ur Ballast board also dead.Require replacement,this Ballast board help to ignite the projection bulb.

Jul 30, 2010 | Samsung HLN567W 56" Rear Projection HDTV

1 Answer

Hai i am in sony projection model fx532

Hello Anand,
                  Arrcoding to the led blinks 10 time indication here find the possible causes of this indication hope this will help you.

 The diagnostic description is
• HV protection 

And possible areas and parts are as fallows.

1-• Q8014 or Q6013 have shorted replace along with R8051 on D board.
2- • IC8005 is damaged. (D board).


Nov 24, 2008 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Panasonic projuction screen tv.

3 blinks is the error code for the convergence ICs. You need to replace both STK392-110 convergence ICs. You can get replacement ICs at the following link and they provide installation instructions with pictures.

Oct 12, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Samsung sp43w6hpx/xeu

Convergence is out. Go to service menu and set it.

Dec 23, 2007 | Samsung HCN436W 43" Rear Projection...

6 Answers

Sony KP-FX432M91 TV 10 blinks

my sony kp-fx432m91 has a 10 blinks problem. it has no pictures but has sound that goes off after 5 seconds please advice on what to do.

my email address is

Oct 31, 2007 | Sony KP-FX532M91 TV

1 Answer

Samsung sp43w6hpx/xeu

Yes you must go to menu and set the convergenge. It is easy. If it doesnt tune in or set to be ok you must get somebody to set convertions manualy thru service menu.

Hope it help

Aug 10, 2007 | Samsung HCN436W 43" Rear Projection...

Not finding what you are looking for?
Samsung HCN4226W 42" Rear Projection HDTV-Ready Television Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides