The T key on my wireless keyboard s oped prin ing.

sir if u pressing the letter "r" key..it opes a run source box then you do one thing firstly in u'r laptop press fn key then press r it will prints only r...

see this and proceed . God bless you
Arrange the screen the way you want it to appear in the print out. Press the "Print Screen" key on your keyboard.

2 Open the "Start" menu and type "Paint" into the search box. Click on the MS Paint shortcut that appears. Any other image editing program will also work.

3 Press the "Ctrl" and "V" keys to paste the screen shot into Paint. Click "OK" to enlarge the canvas. Press the "Ctrl" and "P" keys to print.

4 Select the appropriate options from the Print window. Click the "Print" button.

After six months of using the same keyboard / mouse combo with no problems, I had exactly the same problem as you one day (keyboard wouldn't connect, but mouse OK), I resolved it by powering down the mouse (hold the 'connect' button) and then sync-ing the keyboard using the USB key. When I powered the mouse up again, both pieces of equipment worked fine again. Hope this helps.

www.myspace.com/misnomeruk

a) Locate and write down your wireless router settings:
Network Name (also called SSID) :_________________________________________
WEP key/WPA Passphrase (if needed) :_____________________________________

IMPORTANT :You must have this information available to continue with your wireless setup. HP provides
a web-based tool called the Wireless Network Assistant [URL: www.hp.com/go/networksetup (English
only)] that can help retrieve this information for some systems. If the Wireless Network Assistant is unable
to retrieve your network information, you must consult the documentation for your wireless router, the router
manufacturer, or the person who originally setup your wireless network.

b) Press the Setup button on the HP All-in-One. (wrench/spanner symbol)
c) Press down arrow button until Network is highlighted, and then press OK . The Network Menu appears.
d) Press down arrow button until Wireless Setup Wizard is highlighted, and then press OK . In a few moments, a list of detected
networks appears on the display. The network with the strongest signal appears first.

e) Do one of the following:
- Press down arrow button to highlight the name of the network that you wrote down earlier.
- If the network name that you wrote down does not appear in the list, you can enter it manually. Press down arrow button until Enter New Network Name (SSID) is highlighted, and then press OK . Then use the visual keyboard to enter the network name.
f) If your network uses security, a prompt appears for the WEP key or WPA passphrase. Both are case sensitive. Use the visual keyboard to enter the WEP key or WPA passphrase, as requested.
Note : If your router provides 4 WEP keys, make sure you use the fi rst one.
g) Follow the prompts on the display to complete the network setup.


Visual keyboard tips:
To Select: use Arrow keys to highlight, and then press OK .
For mistakes: Select Clear .
For lowercase: Select abc
For numbers: Select 123
For symbols: Select .@!
When you are finished: Highlight Done , and then press OK .

check *********** board .Please try to connect your key boardusing USB converter. and see whats happening there may be a problem in the key board is which is inbuilt motherboard

buy another keyboard which have FN key... theres a kind of keyboard that are not using FN key...

It is the security key used for your wireless router.
When you set up any device to connect to the wireless router you will need it.You should be able to go on you computer,open internet explorer,and type 192.168.1.1 to get to your router page to see all the info needed.

Try Uninstalling the Keyboard Device, then re-installing it through the add/remove new hardware section.

check the hotkey for "select all" usually the controll or alt key , it may be stuck. you can gently pry up any key on the keyboard thats stuck with a butter knife. also might try shaking the keyboard upside down to clear anything lodged under the keys.

When you have the settings on your screen. Hold the Ctrl key down on the keyboard & press the Print screen key on the keyboard at the same time. Open windows paint program. Click edit & than past. Now you can save the image as a .bmp file. Name it as you like. (This is called a work around).