Question about Watches

2 Answers

Aquatech I have a aquatech CHRONO watch with 4 buttons, but I am unable set the time. I lost the manual. Can you p;lease help? My email is

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: aquatech

Thank you! This solution finally worked for me. I had been playing with this watch since purchasing it while visiting in NYC. It was driving me crazy!!
Best regards,
Central Coast Cali

Posted on Sep 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: aquatech

Press the "mode" button in and hold it for a few seconds, when the display flashes use the "start/stop" button to advance and "lap/reset" to select the section you want to change. When finished just press "mode" again.

Posted on May 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Have a Aquasport 3ATM watch(red). Could

Was not able to find an actual manual for the Aqua Sport watches but what able to find a posting on How to Set an Aquatech Watch. Perhpas the following will be of assistance:

If this does not help, are you able to provide any more infmration about the manufacturer and the specific model you have.

Apr 16, 2011 | Watches

1 Answer

I have an aquatech watch and don't know how to set it.

Thank you for contactng FixYa.
Setting the Time and Date
  • To set the time and date on your Aquatech watch, begin by pressing the "Mode" button three times to access the time setting screen. Use the "Lap/Reset" button to set the hour on your watch. Use the "Start/Stop" button to advance the numbers to reach the correct hour. When you've set the hour, use the "Lap/Reset" button to set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch.
  • Setting an Alarm
  • To set an alarm on your Aquatech watch, begin by pressing the "Mode" button two times to access the alarm setting screen. Use the "Lap/Reset" button to set the hours place, using the "Start/Stop" button to reach the correct hour. Repeat the same procedure to set the minutes for your alarm. When you have finished setting the alarm, activate it by simultaneously holding the "Lap/Reset" and "Start/Stop" buttons until the alarm icon appears. When the alarm sounds, silence it by pressing the "Lap/Reset" button.
  • Deactivating the Hourly Chime
  • Many Aquatech watch models feature an automatic hourly chime. This can be inappropriate and inconvenient in many situations. To deactivate the hourly chime on an Aquatech watch, simply press and hold the "Lap/Reset" and "Mode" buttons simultaneously. After you have correctly deactivated the hourly chime, the hourly chime indicator icon will disappear from the watch's main screen.

  • Best regards. Jewel

    Sep 18, 2010 | Watches

    1 Answer

    How do I set watch from military time to a.m./p.m.

    mcdevito75 here, I'm sure you can type in search from your home page, Aquatech watch instructions This should help.

    Jul 12, 2010 | Watches

    1 Answer

    Need instructions on National Geographic Men's watch #NG010GYSK

    go to Buliva web site and look for the chorograph 561/598
    1. Hours, minutes, seconds and date display.
    2. 60 minute Chronograph (CHRONO) with minutes and
    seconds display.
    3. 24 hour hand, permanently synchronized with the normal
    12 hour hand.
    1. Pull the crown out to position “3” (See diagram). If the crown has
    a “screw-down” lock, then unscrew the crown lock first by turning
    the crown toward you, then pull it to position “3”. Do not forget to
    screw the crown back “IN” after all setting is completed.
    2. Turn the crown towards you (hands moves clockwise) until the
    date changes at approximately midnight.
    3. Continue turning the hour and minute hands to the correct time.
    If it is afternoon you must go past 12 o’clock again (noon) to set
    the correct time.
    4. When the correct time is set,push crown back to position “1”.
    1. Pull crown to position “2”(See proceeding diagram).The watch
    will continue to run.
    2. Turn the crown away from you until the correct date appears.
    3. Once the date is set, push the crown back to position “1”.
    Note: Do NOT set the date between the hours of 8:00 PM and
    3:00 AM.This would not damage the watch,but the date may need
    to be reset later.
    If the chrongraph second hand is not positioned at the proper
    starting position (12 o’clock or “zero” position), use the below
    procedure.It does not need to be repeated unless the watch
    receives an impact sufficient to move the hand out of position, or
    the Battery has been changed.
    1. Pull crown out to position “3”.
    2. Push button “A” to move the Chrono Second hand (long hand) to
    the “0” or 12 o’clock position. Each button push will move the
    hand one step – BUT holding the button down will advance the
    hand rapidly.
    3. Push crown back to position “1”.
    The maximum chrono reading is 60 minutes, However the
    chrono will continue running once 60 minutes has passed. The
    resulting one hour periods may be added together mentally to keep
    track of longer periods.
    For example – If you know that approximately one hour has
    passed since you started the chronograph, and the chrono reads
    25 minutes, then you know that the chrono has been running 60
    minutes plus 25 minutes, which is one hour and 25 minutes.
    1. Push Button “A” to start the chronograph. Push button “A” again
    to stop the chronograph.
    2. Push button “B” to return the two chronograph hands to the
    “Zero” or starting point.
    3. The Chronograph can be stopped and started again
    (Button “A”), repeatedly, to “ADD” times together.
    BOOK NO. 561/598 Chrono FS00/01/10
    BOOK NO. 561/598 Chrono FS00/01/10
    Watch Setting Guide

    Feb 13, 2009 | Bulova Watch

    2 Answers

    How do you set and deactivate the alarm function.

    I did find two authorized dealers:
    Contact both and request users manual fur your specific model. They must be able to help.

    Jan 05, 2009 | Bulova Watch

    1 Answer

    How do I set the watch to receive the time from the atomic clock?

    Hi Try click on country/language, click on support, click on watches, select your watch.

    (if this was helpful please rate)

    Dec 10, 2008 | Casio Watches

    2 Answers

    Aquatech watch

    press mode button 3 times untill you get into the time set mode - press lap/reset twice until the hours start to blink.

    press start/stop and cycle thru all the modes depending what time you want to set - it will go thru 1, 2, 3, etc thru 24 H then 1, 2, 3, etc thru 12 A then 1, 2, 3, etc thru 12 P - depending on thte time you want to set the A is for AM and the P is for PM

    hope this helps


    Jul 23, 2008 | Watches

    1 Answer

    Invicta Ocean Ghost Chrono Model# 2636

    Did you recently have a battery changed. A lot of times on chronos when the battery is changed the battery has to be short circuited to the AC. Which is done by taking tweezers. & touching the positive part of the battery to the part of the watch marked AC. Then try to pull the crown all the way out to time setting position press the top rt button & the second should move keep moving until it lines up with zero. If you haven't had the battery changed try what I told you to do with the crown & the top right button.

    Mar 13, 2008 | Invicta 2636 Ocean Ghost Chronograph Watch

    1 Answer

    Luminox 8152 chrono

    If you have your instruction manual it should tell you how to reset the chrono. i have the Luminox 8352 and it says to pull the crown out to the 3rd position. then press and hold both the start/stop and lap/reset buttons for a couple of seconds. you'll see the second hand rotate, then you can single click the start/stop button to manually move the second hand 1 second, or you can hold it and it will continue move for a longer period until time desired. if you need to adjust the other chrono hands, click the lap/reset button and then you can click the start/stop button again. repeat for the minute/hour chrono hand. when you're finished push the crown back in. it might work even though it's a different model, worth a shot? hope that helps. these are really great watches.

    Jan 02, 2008 | Luminox Field 821 wristwatch

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    895 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Watches Experts


    Level 3 Expert

    18258 Answers

    Arturs Kalnins
    Arturs Kalnins

    Level 3 Expert

    2334 Answers

    Jimmy Accardi

    Level 2 Expert

    97 Answers

    Are you a Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides