Question about Everex StepNote NC1500 Notebook
Everex has a known problem with this model of laptop. It has been known to set its bios password by itself. It is a simple fix, but should be done by a proffesional. There is no charge for this repair at a Everex repair center.
If you want, this is what needs to be done. Remove the piece of plastic above the keyboard. Unscrew the 2 screws in the keyboard and lift the keyboard up( No reason to disconnect it ) Unscrew and remove the modem card in the center. There is 2 solder points c88 on the system board. You need to short those 2 points out while you press the power button on. This will reset the bios password. This should take someone about 5 minutes to do.
If this solved your problem please rate this solution as "Solved" or ask here again in order to find another possible cause
Posted on Oct 26, 2007
Tips for a great answer:
Nov 27, 2010 | Everex StepNote NC1500 Notebook
During the boot up process you will see on the screen for a short amount of time press a certain key to enter set up
Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there
hope this helps
Nov 24, 2010 | Everex StepNote NC1500 Notebook
Dec 21, 2009 | Everex StepNote NC1500 Notebook
Apr 12, 2009 | Everex StepNote NC1500 Notebook
Jul 24, 2008 | Everex StepNote NC1500 Notebook
Apr 22, 2008 | Everex StepNote LM7WZ Notebook
551 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: