How do i use transparency film

If you are trying to print on normal transparent film then the ink will not dry, it needs to be special transparent file for inkjet printers.

Try using the Q-tip and alcohol on the print head (transparent film). Did you refill the cartridge yourself because overfilling will cause ink everywhere. If there is too much ink for the Q-tip, try a kleenex with alcohol. In order to test prints, the excessive ink must be dealt with.

Hi! here is ... 1. Open your printer i.e. left and right spock. 2. Put your transparent belt between the Cartridge & back board. 3. Each corner there is a small rubble pin. 4. Put your transparent belt any one of the pin. 5. Now put the another one. 6. Remember that let them straight... thanks

Use the paper option, BUT you need special inkjet transparency film. If you use normal transparency film the ink cannot dry properly and will streak.

Try the setting for glossy photo media. You want a minimum of ink. Also use the transparency media intended for ink jet AND observe the correct side to be printed on.

How can I print on a transparency with a canon MP560? There is no transparency option,

Hello ,
Of course you can.
While printing set it in advance printing options, the paper type the print quality and others setting corresponding to your needs
Regards
Uttam

Go to the printing preference in your software driver and to the right you should see a "media type" radio button.Look through your choices and you should see a category for tranparencies.
Also make sure the the box under the media type shows auto sheet feeder.

Thank you for your support, it was dead on! I just simply follwed the directions in properties and used less ink.

I have been using Walgreen ink refills in emergencies, so I bought some HP ink and I reaqlly do not know whether it was the ink, or I believe it was the settings.

God bless!
Lila Jane

Sorry, but you won't be able to do that with a CX6600. In order to scan film negatives, you need a printer that includes a transparency unit in the lid, that is, a panel that lights the film from behind. Also, the CX6600's scan resolution wasn't designed for detailed film scans. Try the online Epson Store at www.epsonstore.com where you can often find good deals on refurbished stand-alone scanners with transparency units.