Question about Fuji Pictrography 4500 Thermal Printer
Fuji 4500N Pictography printer
Prints 8x10 fine
11x14 Jams.... when paper is extracted there is crimp in the paper about an inch and half from one side of the paper...???
I had the same problem and the fix was adjusting the peeling time. Once this was adjusted I haven't had any jams. Fuji Tech Support talked me through it over the phone. Unfortunately I didn't write down the procedure and can't remember how we did it to share with you but I think I had to go into a maintenance or service mode to do it. You could probably look in the Service Manual to see how to adjust the peeling time. My Service Manual says refers to section 2.5.4.
I hope this helps,
Posted on Jan 03, 2008
Tips for a great answer:
Apr 09, 2014 | Epson Stylus NX230 Small-in-One USB...
Apr 09, 2010 | Epson Stylus CX9400 Photo Printer
Jan 14, 2010 | HP DeskJet 1280 InkJet Printer
Jul 28, 2009 | HP Color LaserJet 2600n Printer
Feb 03, 2009 | Fuji Pictrography 4500 Thermal Printer
Jul 29, 2008 | HP PSC 1315 All-In-One InkJet Printer
May 15, 2008 | Fuji Pictrography 4500 Thermal Printer
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: