Why is my printer printing burry - HP Photosmart C7250 All-In-One Thermal Printer

Call the manufacturer. They can help you.

No, Ruger uses custom rings which clamp onto the receiver in machined groves. You can get Burris "Weaver to Ruger" adapters for about $33.00 at Brownells. Mfr Part: 410990
BURRIS RUGER TO WEAVER BASE ADAPTERS

http://www.burrisoptics.com/customer.html You can find customer service here with contact info, but the website is not resonping at this moment. Hopefully it will be working later.

Check out this video by Midway, watching my help you with your problem. Click this link Midway video.

Have you tried aligning the print head? It should be an option on the Maintenance menu.

By the way, that carriage is called a print head. Try removing the print head (you have to remove the ink tanks first; be careful, they leak) and putting it back in. The instructions should be in your manual

If your scope is fogging it has lost the nitrigon in it and you will have to send it back to the factory to be refilled and resealed. I would send it back to burris.

http://www.burrisoptics.com/pdf/Technotes%20XTR%206X-24X.pdf

I think CheaperThanDirt.com sells them. 1-800-421-8047

Firstly, see if the printer still works. Print something. Then I suggest bringing it into where you purchased the printer. If a twenty month old child pulled it out I am sure it was not burried inside the printer and a Rep at the store can fix it immediately with out cost. Do not let them charge you. Just let them know that this ribbon came out and you do not know where it goes. If the printer works without it, don't worry about it, but keep the ribbon tucked away somewhere and when you go back to the store, when it is convient, have them take a look at it. Let me know how it goes.

Cynthia Charczenko

How did you get to the tranport rollers they are burried you are just looking at idler paper guides?