Question about Singer 2732 Mechanical Sewing Machine

1 Answer

Singer model 2732

This sewing machines bobbin case keeps popping up and wont stay in place, what can i do to stop it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 136 Answers
Re: singer model 2732

It is either inserted incorrectly or the bobbin case needs replacing. Check the bobbin case by running finger tip around the outside of case, if rough spot needs replace. There is a ltch that is spring loaded you must hold back with small bladed screwdriver while inserting case for proper placement

Posted on Aug 26, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why wont my singer futura xl-400 bobbin case stay in place and keeps getting jammed

Hi, I just want to make sure. Do you put the bobbin under the little hook and then pull it up the case?

Jun 06, 2014 | Singer Futura Xl-400 All-In-One Sewing And...

1 Answer

Singer 2662 bobbin case keeps popping out.

Check our bobbin for burrs and damage. If the thread catches a rough edge it can pop the bobbin out. Try a different bobbin with new thread... see if that helps. If it does your current bobbin is likely trash.

Hope that helps.

Jul 14, 2012 | Singer 2662

2 Answers

The bobbin case on my singer 5050 keep popping up?

is this a top or front or side loading bobbin case?

Jan 16, 2012 | Singer 5050 Mechanical Sewing Machine

1 Answer

My bobbin on my Singer 4562 keeps bunching up the threads, can you help?

If you have the black bobbin case you must make sure you use only a good mercerised thread, there should be enough gap between the edge of the bobbin case and the silver adjuster to allow the thread to pass through, if there is not then you must slacken off the two screws and move it over a fraction.

Aug 11, 2011 | Singer 2732 Mechanical Sewing Machine

1 Answer

How do you thread the machine and bobbin on this singer model 2732

Sewing machines. All the manufactures copyright their manual. They know that you need a picture. It'll cost ya $12.

Jun 04, 2011 | Singer 2732 Mechanical Sewing Machine

1 Answer

How to wind the bobbin in a singer model 2732

Go to and download a manual for free. It will tell you how to wind the bobbin

Sep 12, 2010 | Singer 2732 Mechanical Sewing Machine

1 Answer

Machine making a noise.

you may have put the bobbin in wrong so when runnng it pul on the thread which pops the bobbin,
check under the boobin case make sure it clear of dirt and thread, also the piece under the bobbin case may also have been push out of place make sur it is in correct.

Aug 26, 2009 | Singer Quantum 7350 Mechanical Sewing...

2 Answers

Problems with Singer 2732

"Birdnesting" occurs when there is no tension on the needle thread to pull the bobbin thread. This is easily corrected by rethreading the machine, following the threading path carefully and making sure the thread is fully engaged in the tension mechanism.

Jan 02, 2009 | Singer 2732 Mechanical Sewing Machine

1 Answer

Bobbin case

Hi Anjulie
Singer has come up with another clip on the bobbin case- you will have to take your machine to a dealer for that.  They also have a boobin cover with two depressions on it to keep the bobbin better in place - ask your dealer for it.

Apr 11, 2008 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Singer 2732 Mechanical Sewing Machine Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides