Question about Onkyo HTR500 Receiver

1 Answer

Rear surround speakers quit working from my Onkyo

My girlfriend tried to watch a dvd on my home theater system while I was out of town. Apparently she changed some setting on my Onkyo receiver because now the rear surround sound speakers won't work. I noticed the receiver says PCM on the display which I don't remember seeing before. However, I can't seem to change it to DTS or whatever I need it. I try, but no sound is produced. Any help would be appreciated.

Bob

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 757 Answers

It looks like the audio output was changed on the player so that it doesn't output 5.1. Enter the setup menu on the player and change DTS to output DTS instead of what be labled as stereo or L/R and Dolby Digital to output Dolby Digital instead of whatever else it is set to.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will only play DVDs in Black and White


Onkyo DV-CP706B 6-Disc DVD Player (Black) - Amazon.com

www.amazon.com/Onkyo...Player-Black/.../B001AMS...

Amazon.com, Inc.Color: BlackChange .... It's quieter than it was before, and it plays ALL DVDs, even if you can see some visible damage ..... THere was no color-just black & white.

Onkyo dvd player no color only black white Questions ...

www.fixya.com > Forum > Tags > dvd player no color only black white
Onkyo dvd player no color only black white related problems. Ask your Onkyo dvd player no color only black white questions. Get free help, advice & support ...

Onkyo dvd player plays black white Questions & Answer


Dec 29, 2015 | Onkyo Dr-s2.2 5.1 Dvd Home Theater...

1 Answer

My sound on Onkyo HT R 548 stopped working


If this is a Surround Sound System you can check channel and audio tone levels using the remote. Check remote for a receiver button followed by Test button. Check manual for test instructions.

Dec 30, 2014 | Onkyo Audio Players & Recorders

1 Answer

How do I connect my TV to play through the surround sound?


What kind of tv?

I HOOK cable to MY DVD-R which has a Cable IN jack then use audio out to my MY RECEIVER which repoduces the TV & audio signal, I then set my TV to the S-video mode to watch.

Aug 21, 2010 | Onkyo HT-S790S System

1 Answer

I have an Onkyo HT-S6100 home theater not sending picture to TV.


I just fixed mine with the same problem. Apparently, the HT-R667 and 606 receiver that comes with 6100 has a problem with the HDMI board. Onkyo wanted $500 dollars to fix it, costed me $16. Here's how to fix it. http://www.highdefforum.com/high-definition-receivers-recorders-players-tivos/121956-repairing-onkyo-htr667-aka-606-a.html
and the youtube vid: http://www.youtube.com/watch?v=gj0x5S9ez5U
Good Luck!

Apr 04, 2010 | Onkyo TX-SR605 Receiver

1 Answer

How do u plug in a dvd player


the onkyo receiver should have hdmi jacks on it labeled cbl/sat,dvd, and so forth. plug the hdmi wire into the dvd and from the dvd to the hdmi jack on the onkyo that says dvd. then run another hdmi cable from the hdmi out jack on the onkyo receiver to the tv

Oct 21, 2009 | Onkyo HT-SR800 System

2 Answers

Onkyo Receiver shuts down when volume set higher.


my yahoo a/c is open what mail not open $ internet explo is hang

Oct 08, 2009 | Onkyo HT-S660 System

1 Answer

Dvd hdmi cable into receiver


unhook and reconnect a few times, try with power on and off, (they have to communicate with each other) if not, return receiver and get a new one.. I had this happen with my yamaha...

Jan 26, 2009 | Onkyo HT-S5100 Theater System

1 Answer

HELP: Onyo Remote Does Not Recognize Receiver when using Cable


Since you have the cable connected to the reciever thru the HDMI, you may have accidently changed the input source of the reciever from HDMI or digital to analog.

When you have the reciever set to listen to the cable, check the input mode and make sure it is set to use the HDMI or digital input and not the analog.
The rca jacks are analog, and they worked, so I think you have just solved your own problem without realizing it.

Let me know if this works and if so a good rating would be appreciated. Thanks and have a great day

Jun 16, 2008 | Audio Players & Recorders

2 Answers

Onkyo HT- S790 installation manual


You can find manuals for Onkyo products here http://www.onkyousa.com/download/own_manuals.cfm

Jul 22, 2007 | Onkyo HT-S790 Home Theater System System

Not finding what you are looking for?
Onkyo HTR500 Receiver Logo

Related Topics:

1,072 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Ted28

Level 1 Expert

5 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...