How to i use auto answere - Plantronics CS540 Headset

To turn on the Auto Answer for fax, on the control panel of your printer, press on Setup > Fax Setup > Ringing and Answering > Auto Answer > On.

bbargains,

Here is the correct procedure to receive a fax automatically;

Make sure the printer is on and is connected to a working phone line.

Make sure that Auto Answer is on.

To check if Auto Answer is on:

From the printer control panel press the wrench sign.

Press the arrow buttons until Fax Setup appears, .

Press the arrow buttons until Ringing and Answering appears, and then press

OK to save the setting.

Press OK again.

Check to see if Auto Answer is set to On.

If Auto Answer is not set to on, press the arrow buttons until On appears, and then

press to save the setting.

Set the number of times the telephone rings before the printer automatically

receives faxes:

Press the arrow buttons until Pick-up On appears, and then press OK .

Press the arrow buttons until the setting that you want appears, and then press to

save the setting.

When the number of rings you set is detected, the printer automatically receives

the incoming fax.

This should solve your problem.

Thanks for using FixYa and for the great rating.

hardrocko

Hi, LG HBM 730 Bluetooth Headset Wireless Headset does have the ability to auto answer a call. But it does that automatically (does not need settings for it).

Also you can set auto answer from your cell phone.I don't know the model of the cell phone you are using at the moment. So you will need to use the manual of the cell phone to know how to auto answer calls.

When you set the cellphones auto answer, then it will auto answer on your LG HBM 730 Bluetooth Headset Wireless Headset..

Have a nice day

how to remove autoanswer from my LG phone

You probably have auto answer turned on in your phone. The headset does not have this feature. You must find it in your phone to turn off auto answer while headset in use.

ps- second user- You canot use the phone handset with bluetooth device on. At least none that i know of.

Auto Attendant
Answer Lines
1 – Feature 983
2 – Log: Dial 1020000 (3-digit DNs) or 120000 (2-digit DNs)
3 – Press AA
4 – Press LINES
5 – Line number: Dial line number (001-xxx).
6 – Line:xxx Ans:No Press CHNG to AA if auto attendant will always answer theline. If a Night Service key will be used to activate auto attendant answering, leave Ans: at No.
7 – If line has been changed to Ans:AA, press * then press TABLE.
8 – If Table:1 is OK press RINGS. (Table 1 is the default greeting table. Change to a different table (1-4) if alternate answering is required on the line being programmed.)
9 – Rings:0 – Press CHNG, dial number of rings before auto attendant answers the line, or leave at 0 for immediate answering. Allow at least 2 rings if CLID is in use.
10 – Repeat for each line to be programmed.

Notes For Night Service Mode Auto Attendant Answering
If the auto attendant will only answer lines in night service mode, line answering should be set to No as per step 6 above. Using night service will cause the AA to answer lines immediately.

If you are an administrator, you can make the change in the second page of the station "auto-answer=none". Otherwise, if you are user and there in in your menu list the feature int-auto-ans, you can press the specific button.
I hope to help you.

You need to set the machine up to AutoAnswer as follows per HP:

Receiving faxes automatically If the Auto Answer option is set to On , the unit automatically answers incoming calls and receives faxes after the number of rings specified by the Rings to Answer setting. Press Auto Answer to turn on the Auto Answer option. 1: Setting the Auto Answer option

1. 1 - Auto Answer button
   NOTE: The Auto Answer button is lit when the Auto Answer option is turned on.
2. Press Auto Answer again to turn off the Auto Answer option.

yeppers...same thing happens to mine. So, I simply set it to receive faxes manually now.