Question about D-Link DI 514 Wireless Router (DI-514)

1 Answer

Setting up wireless connection

Does anyone know if you have to have some sort of software to setup a D-Link DI514 router?

Also, I have followed step by step instructions from the following link (http://www.microsoft.com/windowsxp/u...reless.mspx)on how to setup this network and for some unknown reason I cannot connect to the internet. I setup everything as instructed and I connect and power on in sequential order. I have no idea what I am doing wrong. Any ideas???

Posted by on

  • 2 more comments 
  • ccureton1337 Oct 25, 2007

    Yeah, Im having problems just accessing the router. Thats why i was wondering if there's some software of something im missing. I've typed that ip address in internet explorer many times and got nothing. I cant even get to the sign in box. On a normal network without the router (laptop directly to modem), on the back of the laptop I will see green and orange lights flickering where the ethernet cable is plugged in to signal internet activity. When the router is connected to the laptop, we get only a constant green light. 

  • ccureton1337 Oct 26, 2007

    OK i got access to the router now. I had to reset the router to get the internet to work. However, i used the wizard in D-Link, went through the entire setup process and after applying the new settings a window displays reading "saving changes and resetting..." but the window never goes away and the computer never links up. Any ideas? 

  • Anonymous Aug 30, 2008

    cannot get my d-link to run

  • brendon_meyn Dec 04, 2008

    can not reset dlink router

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Are you able to access the router itself? try typing 192.168.0.1 in your browser. it's the routers internal address. if your able to access the router and sign in. click the advaced tab and choose network filter. put your mac address in the page. save. you can find the mac address by start-run type "cmd"( with no"") in the comand window type ipconfig/all. the mac address is the physical address. do this to each pc that you need access for. hope this helps. good luck.

Posted on Oct 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Running the wizard from the install CD does not find the router and I know the router.modem cables are connected properly... whats next...


Hi,


It seems you're setting up a wireless network thru your router. The basic steps in setting-up a wireless connection applies to all brands of routers. Most softwares provided by manufacturers, both computers and routers, cause problems with Windows due to incompatibility issues. As of the moment, we need to use the Wireless Zero Configuration or the Windows Wireless Manager that comes with all versions of Windows.


Click the link below for proper cable connections in setting up your wireless network. This also provides somewhat a checklist on what you need for wireless connectivity.

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network


I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!

Feb 12, 2011 | Linksys E3000 Wireless Router

1 Answer

Trying to load software, i get to the second stage it tells me the ethernet cable is not connected properly. i cant get past this.


Hi,

It seems that you are using usb connection to install your router. This error happens, to some, due to incompatibility issues. I suggest for you to set your wireless network by way of general steps and common cable connections. Let's put it, the old ways. This are the general steps for all types of routers.

Click the link below for proper cable connections in setting up your wireless network.

This link also provides somewhat a checklist on what you need for wireless connectivity

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network


I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!

Mongkey

"Understanding explains better..."

Feb 01, 2011 | D-Link DIR-615 Wireless Router

1 Answer

I DONT KNOW HOW TO CONNECT TO THE INTERNET I NEED HELP WITH IT(INSTRUCTIONS) ON HOW?


Hi,

This are the general steps for all types of routers.

Click the link below for proper cable connections in setting up your wireless network.

This link also provides somewhat a checklist on what you need for wireless connectivity

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network


I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!

Mongkey

"Understanding explains better..."

Feb 01, 2011 | Computers & Internet

1 Answer

Cannot connect to wifi


Hi,

The following can be applied to any routers. These are the general troubleshooting steps.

Click the link below for proper cable connections in setting up your wireless network.

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx


Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network


If problem persists, contact your router's manufacturer.


I hope this works for you. Good Luck!

Thanks.

Mongkey

Jan 30, 2011 | Computers & Internet

1 Answer

How to configure my router to ADSL2 modem router


print2.gif print email2.gif email
Title: Setting up your Linksys Router for the first time Article ID: 21463
Your Linksys Wireless-N Router comes with the Cisco Connect software which makes setting up and managing your Linksys Wireless-N Router a quick and simple experience. You'll have your Linksys Wireless-N Router up and running in no time.

NOTE: The Linksys E2100L router is only available in the U.S. For help on setting up a Valet or Valet Plus, please click here.

Some basic requirements before you begin
i. An active Internet connection.
ii. A computer with a wireless or wired Ethernet adapter, running one of the operating systems below.
- Windows XP with Service Pack 3
- Windows Vista with Service Pack 1 or better
- Windows 7
- Mac OS X Tiger 10.4.9
- Mac OS X Tiger 10.4.11
- Mac OS X Leopard 10.5.8
- Mac OS X Snow Leopard 10.6.1
Getting started
Provided that the above requirements are met, you can now begin setting up your Linksys Wireless-N Router. In this example, we'll be setting up the Linksys E3000 High Performance Wireless-N Router. The following steps will walk you through the entire process.
Step 1:
Your Linksys Wireless-N Router allows you the freedom of running setup via a wired or wireless connection. Therefore, please start by performing the instructions under the description that best matches the computer you're working with. Proceed to Step 2 once you're done.
Description A:
You are using a computer with no wireless connectivity that is normally connected with an Ethernet cable to your DSL/Cable modem.

Instructions A:
Please connect one end of the supplied Ethernet cable into the Ethernet port on your computer, and connect the other end into one of the numbered Ethernet ports at the back of your Linksys Wireless-N Router.
Description B:
You are using a laptop with a built-in wireless adapter.

Instructions B:
If you're using a laptop, please ensure that its wireless feature is switched ON, and that your laptop is positioned within 5 feet of your Linksys Wireless-N Router.
NOTE: Most laptops have a switch that turns its wireless feature ON and OFF. Refer to your laptop's documentation or online help if you're unsure where this switch is. This doesn't apply if you purchased an external wireless adapter separately.
Step 2:
On your computer, insert the supplied Setup CD that came with your Router. Setup should start automatically.

NOTE: If setup doesn't load automatically, please click here.

Step 3:
The first screen greets you with the Software End User License Agreement. Please take a moment to read through and understand the agreement. Once you're ready, go ahead and click Next.

kb21463-001_en.png

NOTE: The Linksys Wireless-N Router model displayed on the setup screen may vary based on the Linksys Wireless-N Router model you have.
Step 4:
On the next window, please follow the on-screen instructions on how to connect your Linksys Wireless-N Router:
kb21463-002_en.png Plug one end of the power cable into your router and the other end into an electrical outlet.

NOTE: The Linksys E3000 features a power switch, located at the back-end of the unit, next to the power port. Please make sure that this switch is ON. Other Router models may not have this feature.

kb21463-003_en.png
kb21463-004_en.png Plug the Internet cable into the yellow port in the back of your router labeled "Internet". Plug the other end into the modem.
QUICK TIP: Click Show me how for an illustrated guide on how to complete the above instructions.
After completing the above steps, click Next to continue.

kb21463-005_en.png
Step 5:
Setup will now perform a series of tests to determine the optimum configurations for your network. You may notice your computer connecting and disconnecting to a wireless network several times. This is normal. Your wireless network is simply being secured.
NOTE: The setup process automatically generates a unique and secure Wireless Network Name (SSID) for your convenience.

kb21463-006_en.png Step 6:
The next part of the setup automatically detects your Internet connection type. If you are using a DSL connection, you may be requested to enter your account details. If this is the case, simply enter your Account name and Password in the allocated fields. Otherwise, you may skip ahead to Step 7.
NOTE: If you don't know your Account name and Password, your Internet Service Provider (ISP) will be able to provide these details.

QUICK TIP: Click Examples to see what your Account name should look like.

kb21463-007_en.png NOTE: Cable Internet users will not see the above screen.
Step 7:
Sit back and wait a moment as setup finalizes your Linksys Wireless-N Router settings, and re-establishes your Internet connection.

kb21463-008_en.png Step 8:
Once your Internet connection is up and running, a confirmation window similar to the screenshot below will appear on your screen. Your Linksys Wireless-N Router is now secure and connected to the Internet. This concludes the setup process. Click OK to continue.

kb21463-009_en.png
Step 9:
You will now be taken to the main Cisco Connect window which lets you manage and further personalize your network settings. If you would like to learn more about the available features in Cisco Connect, please click here. Otherwise, you may click on the Close button to exit Cisco Connect, and begin surfing the Internet right away.
NOTE: To launch Cisco Connect again at later time, on a Windows computer, go to Start>All Programs>Cisco Connect. To launch Cisco Connect on a Mac computer, navigate to the Applications folder in Go, and then start Cisco Connect. For more help on this, please click here.

kb21463-010_en.png NOTE: Cisco Connect is automatically installed each time you use the Setup CD or Easy Setup Key to setup or connect to your Linksys Wireless-N Router.




Oct 16, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless security


Just open the link below for the step by step procedure in setting wireless security on your router.

Setting up wireless security on a Belkin F5D7230 Wireless Router:

Dec 22, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

D-link di514


Hi,

Try the DSL modem directly connected to the PC.No D-Link Router(powered off and disconnected). Verify that the PCcould surf/browse/connect to the Internet. Go to Start, Control Panel,Network Connections, right click Local Area Connection, Properties,scroll down to/highlight Internet Protocol (TCP/IP), Properties button.Get the IP Add, Subnet Mask, Default Gateway and DNS assigned to the PC(write this down. This will be your WAN/Internet IP settings). Then Disable DHCP of your modem if it has one. OK, close, save or whatever is applicable.

Disconnect the DSL modem from the PC. Connect D-Link Router to PC (wired/LAN) without the modem connected to the router.Go again to Start, Control Panel, Network Connections, right clickLocal Area Connection, Properties, scroll down to/highlight InternetProtocol(TCP/IP), Properties button. Tick "Use the following IPaddress". Enter this IP Add 192.168.0.10, Subnet Mask255.255.255.0,Default Gateway 192.168.0.1 and the DNS from what youhave written down earlier). This will be your LAN IP settings. OK,close, save or whatever is applicable.

Open a browser and log into the D-Link router (192.168.0.1, using "admin" as a username and no password). Do not run Wireless Network Setup Wizard. In WAN/Internet/Modem setting of router enable/check Static IP Add.Usethe IP numbers previously assigned to PC that you have written down asthe router's WAN/Internet/Modem IP settings. OK, close, save orwhatever is applicable. Reboot router. Connect DSL modem to router.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Aug 04, 2008 | D-Link DI 514 Wireless Router (DI-514)

5 Answers

How do I secure my dlink wireless connection?


Type 192.168.0.1 (you can type the router address if you have changed) and enter on browser's addressbar. Router's interface will appear.
Click on SETUP and Click on the WIRELESS SETTINGS at left side. on the page you will see the option of WIRELESS SECURITY by drop down menu you can choose the Security mode that you wish. here is the link for the emulator
http://support.dlink.com/emulators/wbr1310_revB/wireless.htm

Please post your question if you need further assistance
Good Luck

Jan 19, 2008 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Need help with a router


Yes I do know routers require configuration (setup) go connect to some devices to access the internet.

I am not familiar with the ISP 3web -- can you provide me the website where the support or help function is located.

I may have found the 3web help site check the following link to assure the service is right and let me know if you have a DSL or Cable connection.

help link

If you are not familiar wit configuring your wireless router --
Will you provide me with the Manufacturer and Model of the
Router? They all configure differently when it comes to
detailed instructions. (the link provides instructions for
some routers however maybe not for yours)

I may need manufacturer and model information on your modem device depending on what I find at the ISP's site. (if the link is right I probably do not need this)

The following is probably not covered in the 3web documentation.

With wireless services attached to your network you should also consider securing that wireless service so others cannot easily access your network and computers, like your neighbors or people on the street with a laptop.

If you want to consider that I can discuss several options with you. However to determine which options your equipment supports I will need to know the manufacturer and model number of your wireless adapter or the computer with a built-in wireless adapter you intend to connect to your wireless network.

Dec 13, 2007 | Computers & Internet

Not finding what you are looking for?
D-Link DI 514 Wireless Router (DI-514) Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...