Question about InFocus Office Equipment & Supplies

1 Answer

Colors out of focus

Colors of of focus, when picture reversed colors are in focus

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

That means that you have to set convergence, or that you have a convergence fault.
To start check if there are convergence settings available for your model. If autofocus preset and convergence settings are not enough to fix the problem, then usually there is a fault , and the convergence ICs must be replaced.
The convergence ICs are Power Amps integrated circuits (STK) located inside the projector. They are tested ohming the resistors near to them. When they are defective they must be replaced. The replacement must be done by a professional technician or by an expert electronic repairer.
Regards.













Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ghost image in red and alot of red color. This occurs all the time. I have tried magic focus and manuel focus. No change


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?This tv have a dead convergence board.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.Fixing the tv convergence board,will solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 09, 2011 | Hitachi 51F500 51" Rear Projection...

1 Answer

Periodic color scrambling - out of focus. Seems as though the different colors separate and get out of focus.


Ur tv is having a convergence problems,it dead.Colors lines R,G,B mis alignments,have colors shadows pictures or 3D picture look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 22, 2011 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

Won't magic focus


Magic FOCUS button no help all?The tv have a problems known as a convergence problems,it dead 100%.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors it dead too.These parts on the tv convergence board must be replaced to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Dec 08, 2010 | Hitachi 53SBX59B 53" Rear Projection...

1 Answer

Wavy color separation, auto focus doesn't fix problem. Doesn't have a manual focus.


Ur tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows or 3D pictures.The tv convergence board it have dead 2 STK convergence ICS and some or all it resistors.These parts,must be replaced on the tv convergence board to solved tv picture convergence.

Oct 11, 2010 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Can't get full screen. tried all aspect selections. also color is off. can't get it to adjust. magic focus dosen't help. any suggestions?


Magic focus button don't work.Colors lines R,G,B mis alignment,have colors shadows picture or 3D pictures.The tv have a problems known as a convergence problems,it dead.The tv convergence board it dead,must require replacing 2 STK convergence ICS and some or all it resistors to solved the tv convergence picture problems.The shop,will cost u $300-350 for parts and labors.

Oct 07, 2010 | Hitachi 57F510 57" Rear Projection...

2 Answers

Colors are out of focus and magic focus wont fix


If you have tried the customer convergence menu/control and can not set the convergence you have a fault with the electronic circuit that controls the convergence of your 3 picture tubes this overlaps the 3 colors red, green, blue to create the proper color combination's of colors for a proper picture

May 05, 2010 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hitachi 43fwx20b magic focus the 3 colors are not adjust.


First have the convergence IC's replaced these are the two large black IC's mounted on an metal heat sink.

Oct 24, 2009 | Hitachi 43FWX20B 43" Rear Projection...

1 Answer

Screen Out of Focus with Wavy Lines - Perfect Focus Will Not Corr


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 06, 2009 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Will not show red color in picture, magic focus shows red though


You have a projection light element out. I had the green element go on mine. I had a service agreement so a repair tech changed it.

Feb 07, 2009 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...