Mobi screen password

You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

If your hp computer is installed with Windows 7, following the video to learn how to reset hp computer security password with Windows 7 Password Genius
https://www.youtube.com/watch?v=I5HzG7fb-Wg
If your hp computer is installed with Windows 8, and the password is your only admin password, refer to hp computer Windows 8 admin password reset.

Hi Isaac,
First go to Settings->Location and Security -> Select Device AdministratorsFrom this, remove the check for Mobi AppNow use Manage App or other means for uninstalling. Worked for me. Good luck!!
APV

Is your router running b/n/g network and what security setting are you using like password to access your personal in home network. Because your laptop will need to have the same key as router is using. It is also a good idea to clear all other ip address that windows may have saved.
Step1: internet explore under tools> internet options> tab Connections > LAN settings>(click) Automaticly dettect settings
Step2: click apply/ok to save changes
Step3: goto start menu > run/seach type cmd (this will open command prompt)
Step4: at blinking curser type" ipconfig /release all " hit enter ** donot type qotes
Step5: at curser type " ipconfig /renew "
This should fix your problem. However if you need more help please reply after you have try this.
Thank You Have a good day

Resetting the MC75

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75 by closing all running

programs. A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory

card is not lost.

If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold

boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the MC75 starts to boot release the

Power button.

Performing a Cold Boot
To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi
I have a MC75, which boots into custom program, however I need to change screen saver timer, how do I boot into settings ?
Thanks

This is a confusing report. If you are successfully connecting two other computers to the router using the original router password, why can't you connect your MacBook Pro to the router using the same password? Or is it that the other two computers "know" the original password but you don't?
If one of the other two computers is a Mac, use the Keychain Access utility to look up the stored password for the router.
If not, use one of the other two computers to access the router's configuration screens directly and obtain the password that way.

in order for you to download teh software you will need a motorola svc agreement on your device, if you do then you go to support.symbol.com, if you have an issue finding it please let me know and we will walk you through this

[email protected]

WEP key is the security key you had set when you had set up the network. You need to access the wireless router page
1.Click start >Run>type cmd >hit enter
A black command prompt window comes up
2.Type Ipconfig and hit enter
3. Note down the Ip address next to default gateway that is usually 198.168.1.1
4. Open internet explorer , in the address bar type the default gatway (198.168.1.1)
5 Hit go
6. The belkin password screen would pop up,
7. enter the default user name and password
8. go to the wirless page and check the WEP key

If you donot know the default admin and password , its time to call belkin and they would let you know how to get into the router to check the WEP key
1 800 2BELKIN x2263