Question about NetGear WGR614 Wireless Router

1 Answer

I need to change my NAT settings from moderate to open and dont' know how to do that.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 854 Answers

A. Determining the IP Address and MAC Address of a Computer: Note: Please use the computer for which the Ports are to be opened: For Windows 2000/XP users: 1. Please click on Start and select Run. 2. Type in cmd and click on OK. 3. In the Command Prompt, please type ipconfig/all then press Enter or Return key. 4. Please make sure that the Ethernet adapter has an IP Address that is the same range as the router (e.g. 192.168.1.2 for the computer and 192.168.1.1 for the router). 5. Please note down the IP address and Physical address. B. Reserving an IP Address: 1. Please open any web browser like Internet Explorer or Netscape Navigator. 2. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key. 3. A window will prompt for a user name and password. The default username is "admin" and the default password is "password". Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it. 4. When the setup page opens, click on LAN IP Setup under Advanced tab. 5. Click on Add under Address Reservation. 6. Under Address Reservation window, please select the radio button of the computer you wish to add from the Address Reservation Table. 7. If the computer you want is not on the list, please click on the Refresh button to update the table. 8. If the computer is still not on the Address Reservation Table, please type in the IP Address, MAC Address (Physical Address), and Device Name of the computer you wish to add. 9. Click the Add button when done. C. Enabling DMZ: 1. On the left side of the setup page, click on the WAN Setup under Advanced tab. 2. Check the Default DMZ Server and specify the IP address of your computer. 3. Click on the Apply button.

Posted on Jun 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change nat from moderate to open


seamusbyrnes

To be able to change your NAT setting on you will need to do this on your router. To be able to help you I need to know the make and model of your router.

Issken
http://www.fixya.com/users/issken

Feb 22, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

I want to change my NAT setting from moderate to open


OL, you need to get the manual, link below, and it is all in there how to do it, in security section. NAT = Network Address Translation.
ec1.images-amazon.com/media/i3d/01/.../MANUAL000000300.pdf

May 20, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

NAT on xbox live is moderate! i need it to be open, for best results. What do i need to do?


You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.
Router set up page is the page where you can change the settings of the router

Click Here to know more about router and network

Jan 28, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

How can i make my NAT open from moderate??? (xbox live)


TO opennthe NAT in your router. you willl need to make some changes on your router.
You will need to reduce the MTU on the router to 1365.
you will need to disable the firewalls on the router.
There are some port numbers that you will also need to open on the router.
For this you will need to open the set up page of the router.
Click Here for more info

Oct 17, 2009 | Zyxel P660HW-D1 Router

1 Answer

Halo 3


make sure the security settings on router is WEP-Personal. I don't know what you have for internet but Dial-up, DSL, and satellite internet will not get NAT 1.

Mar 14, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

2 Answers

Nat type


I have the same router (WRT300N) and this is what I did. I don't know if it will work for more than one Xbox360.

- Go to the Setting of the router.

- Applications & Gaming

- DMZ 
. Enable the DMZ
. Choice the Mac Adress under the Destination.
. If you don't know the Mac Adress of your Xbox360 click on the tab: DHCP CLIENT TABLE
.Now from there choice your Xbox360 ( the Xbox360 won't have a Client Name but hopefully you only have your Xbox360 and your computer)
and now save your setting and restart your Xbox360 and there you go NAT open. This also help if you get any kind of  LAG while someone is on the computer using the internet, your Xbox360 will be high priorty to the router.
HOPE THAT HELP

Apr 05, 2008 | Linksys WRT300N Wireless Router

1 Answer

Nat


First call microsoft and tell them that your nat is moderate. (for me it still works on moderate...???) Tell them your router and internet service provider. They will tell you a port number which will have to be opened in order to make your connection stronger. then call your router manufacturer. (or vonage) And they have to help you.

Mar 24, 2008 | Computers & Internet

3 Answers

How to Open NAT?


Look for a setting like "Virtual DMZ Host". It's hard to tell for sure without knowing the make and model of your router.

Jan 14, 2008 | Dell TrueMobile 2300 Router (000001)

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...