Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

TV doesn't turn on. Insignia 32LCD

TV will restart when warm, but after it's been off for a while, it won't turn on until the button has been pressed several times. First problem.Also, the picture has horizontal lines through it and appears to roll vertically in need of a vertical hold button. 2 yrs. old and sucks. Sound works well.

Posted by on

  • samderiggi Jun 04, 2009

    Thanks romsky79. Curious if anyone has repaired the insignia's 'won't turn on' problem and how much it cost. Best buy wants $150 to come to house to diagnose. Of course with my 2 problems, cost is only $75 each problem. A bargain.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 822 Answers

Check the power supply boards apply fresh solder also apply fresh solder to inverter board. scan budged capacitors from secondary power supply.

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove base from insignia ns-32lcd tv


Use an AXE to detach it. It is the only way to detach the base of this TV.

Feb 18, 2017 | Insignia Televison & Video

2 Answers

TV won't turn on


It is possible the problem lies with the TV rather than the remotes

Jun 07, 2013 | Insignia Televison & Video

2 Answers

Insignia akb36157101 does not power the tv any


Aim remote at the TV, hold down the TV Power button, and press the CH up button until the TV turns on/off. This cycles through 45 manufacturer codes.

Mar 13, 2010 | Insignia Digital-to-Analog Converter for...

1 Answer

I cannot turn off the TV,with the insignia remote control


Read the first time start up instructions .. This is what worked for me.

Hold the power-on/off button down while simultaneously pressing channel up , repeatedly for up to 45 times. when the TV shuts off stop, release the on off button.

you should be able to turn it on and off, if you went too far (pressed up arrow too many times), go the other way (holding down the on off and pressing channed down) until it turns on again.

Nov 30, 2009 | Insignia Digital-to-Analog Converter for...

1 Answer

I have an insignia NS-32LCD and it will not turn on


Capacitors are probably bulged in the power supply. Need replaced, not expensive.

Oct 10, 2009 | Insignia NS-LCD26-09 26 in. HD-Ready LCD...

1 Answer

How to turn on TV with insignia digital converter remote


You'll need to program your remote control for your TV. To do this, ensure that your TV brand is one that can be controlled by the remote (a listing is in the owner's manual). Turn on your TV, then press and hold the TV Power button on the remote and press the Channel (CH) ^ or v buttons one or more times until the TV turns off. I hope this helps.

Jul 28, 2009 | Insignia Digital-to-Analog Converter for...

1 Answer

How to remove the back from Insignia NS-32LCD?


I unscrewed all the screws in the back, detached the tv from the base, and was able to get the back off. I ordered a new power supply board and will install it to see if it fixes the problem with the tv (won't turn on, insignia light alternates between red and blue). I didn't notice any problems with "swollen" capacitors, so if the new power board fixes the problem I'll update this website.

Jan 27, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

LG 32LCD LCD TV Problem


It turn out to be a $10 diode on the mainboard, which cost me $100 to have troubleshot and repaired

Jan 19, 2009 | LG 32LC2D Television

4 Answers

Remote Control


From GUEST: I found this solution in the manual and will perform this task again to see if I can get the tv will be re-recognized again. Give this a try, too.


Remote will not turn on or shut off the TV.
• You must program the converter box remote in order to control your TV power button.
• To program the remote control:
    1. Determine if the TV is a model that can be controlled by the remote control. See "Controllable TV brands" on page 17 in the manual.
    2. Turn on the TV.
    3. While you press and hold TV POWER on the remote control, press CH ^ or CH v one or more times until the TV turns off. Each time you press one of these buttons, the remote control sends a manufacturer code (between 1 and 45) to the TV.

Sep 01, 2008 | Insignia Digital-to-Analog Converter for...

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...