Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

I always have"E27" on my pixma mp150 after reset and change ink absorber...What can I do before I threw my canon into the dustbin?(excuse me for my english,i'm french....)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,197 Answers

When the E27 code flashes, it means that the metallic strip has been destroyed and the felt pad MUST be replaced (washing won't do anything) and it is NOT sold on the general market and only the registered Canon repair centers have access to new ones. It costs $30-40 USD to go in, take out the old one, clean the bin and replace it with a new one. The printer cost about $130. YOU DECIDE but don't waste your time washing out the pad and playing with a nonexistent reset code.

thank you good luck

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error 19


Hi there-
Below are a list of the error codes for this model.
E16-E19 = Failed to scan head alignment sheet.

You can find this information at http://www.usa.canon.com/cusa/home

CANON MP140, MP145, MP150, MP160 RESET ERROR CODES
[Info140] pixel_trans.gif RESET ERROR CODES CANON MP140, MP145, MP150, MP160

E2-2 = No paper (ASF)

E3-3 = Paper jam

E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge
is installed, or the ink cartridges are not installed properly

E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera
Direct Printing

E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16-E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Nov 29, 2013 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Problem error e27


Turn the machine off, and remove the power cord from the electrical outlet.
Wait approximately ten minutes then plug in the power cord and turn the machine on.Led error E 2,7 means that the Main ink absorber [5B00] orplaten ink absorber [5B10] is full,and needs to be replaced .Once replaced..you need to reset the ink absorber counter .

Jan 29, 2012 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have Cannon Inkjet Printer Pixma MP150 which is indicating that the ink absorber needs replacing. Can I do this myself? If not please advise of service facilty close to RH19 4ST East Grinstead, West...


The ink absorber is a sponge located under the cartridge head on the right . The warning message is triggered by it and a sensor.
To clean it just unplug the printer, wait 5 minutes, open the front flap and manually move the cartridge head to the left - the sponge will become accessible. Now take your printer to the kitchen sink, put it with that corner down and with a small pipe or whatever spout you have pour warm water over the sponge until it's clean/white. Let the printer drain (shake it to make sure all the water is out) wait another day to be sure all the water inside it has evaporated and start it up again.
To reset the sensor follow this
http://www.inkjet-laser.com/reset-error-e27-waste-ink-absorber-full-canon-pixma-mp150-mp160-photo-all-in-one.html

Mar 08, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

My Canon Pixma MP 150 printer has an error code of E27, waste ink absorber is full. Is there anything I can do to fix it? Or do I have to take it in to a service center? I don't want to pay more for...


Canon MP150 error e27 ink absorber full/reset process

printer powered off but connected on power source , you must:
1. Press & hold stop/reset button, and then press & hold [ON/OFF] button.

2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator).
3. Leave On/Off button. Printer in actually service mode.
4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top.
5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off.
6. Press On/Off button.

Aug 13, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Ink waste absorber


Canon error e27 ink absorber full/reset process

printer powered off but connected on power source , you must:
1. Press & hold stop/reset button, and then press & hold [ON/OFF] button.

2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator).
3. Leave On/Off button. Printer in actually service mode.
4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top.
5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off.
6. Press On/Off button.

Jul 27, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

GETTING ERROR CODE E27, INK ABSORBER FULL


Canon error e27 ink absorber full/reset process

printer powered off but connected on power source , you must:
1. Press & hold stop/reset button, and then press & hold [ON/OFF] button.

2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator).
3. Leave On/Off button. Printer in actually service mode.
4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top.
5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off.
6. Press On/Off button.

May 13, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Absober waste ink is full. Pls help. error code


you need to replace the absorber waste ink pad and service the printer

Nov 17, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

MUMET


The main or platen waste ink absorber is full. Needs replacing and then the waste ink counter needs to be reset.

Service manual here:

http://www.tradebit.com/filedetail.php/4589462-canon-pixma-mp150-printer-service-manual

Nov 02, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...