Question about Canon Pixma MP450 All-In-One InkJet Printer

1 Answer

My canon mp450 printer always show 5010 error code on lcd and i can't do anything with this.. help??? : (

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Try this from the support site. Reset the device when it is not functioning properly. If the device is not functioning properly or to clear memory, reset it.

  1. On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)

    Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.

  2. Wait approximately ten seconds and then press the <ON/OFF> button again.

  3. Wait until the device has completed its cycling process before submitting another job request.

Posted on Jun 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't make my canon mp460 do anything. little used i've just taken it out of it's box again and changed the ink cartridges but nothing. error 5010 showing.


hi
"Issue: ERROR LCD: Error Code 5010
Solution: Press ON/OFF switch to reset the multifunction device

Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.

1. On the operator panel, press and hold the button for one second. (The display will go blank.)

Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.

2. Wait approximately ten seconds and then press the button again.

3. Wait until the device has completed its cycling process before submitting another job request."


or

go to following link you will have more solution

http://www.subnixus.com/error-codes/error-5010.html




May 26, 2011 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

My canon pixma mp830 shows error code 5010. what


The scanner lock switch may be in the locked position. Lift the cover and check the slide switch located on the top front left. If this is not the problem, you will have to have a service center look at the problem.

Dec 19, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

My canon pixma mp450 printer is displaying an error 5010


This is a carriage lift mechanism error.First, make sure there is no paper jam anywhere in the machine.. look inside, rear, where the paper tray (output) is, etc to see if you find any shreds or torn paper that may have gotten stuck and you didn't see.Look carefully in the zone of Purge unit, using flashlight in the right side on printer.If this not help your printer need service.

Nov 02, 2009 | Canon Pixma MP450 All-In-One InkJet...

2 Answers

Canon pixma mx700 error code 5010


5010 is a scanner error from the scanner on top. Canon has no parts for these and you can only replace the entire top of your machine. If you can get it apart, you might clean and lube, but it's not made to be opened.

Jul 03, 2009 | Canon PIXMA MX700 All-In-One InkJet...

5 Answers

Canon PIXMA MP450 "Servic Error 5100"


Try this... it worked on my MP450... Turn the printer on and open the lid, it shows the cartridges. Now let the cartridges settle to the left. You can notice that the cartridges run on a metal belt. It might be dirty, mine showed a black stripe on it. Take a cloth, a cleenex will be fine and clean it up. Move the cartridges to the right (force them with your hand) and clean the part of the belt left behind them. Now turn it off, close it up and turn it back on. It should work

Apr 02, 2008 | Canon Pixma MP450 All-In-One InkJet...

Not finding what you are looking for?
Canon Pixma MP450 All-In-One InkJet Printer Logo

566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...