Question about Cameras

1 Answer

Lcd on, connected or not (vga or dmi) , have a picture in the righ side

Picure white and black stay right side of the screen, the mouse work on back this picture. i have write a good hex edid, (ddcw.exe), i see old test univbe stay on moment in memory eprom of lcd. i turn jscreenfix for pixel, but nothing solve. I think isn't persitance image, Thank. it s possible emaila photo of problem.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cameras Master
  • 27,235 Answers

Make and model may help you get an answer

Posted on Dec 07, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: Cannot Take Pictures Anymore...

sony has recalled some cameras due to the LCD screen problems..I called today because my local camera shop told me there was a recall my model..so Sony is sending me a shipping label and fixing it at no cost...

Posted on Aug 31, 2007

  • 34 Answers

SOURCE: Very, very dark (almost black) lcd screen, but is functional

The LCD viewer is made up of the LCD screen, and the backlight. Your backlight is burnt out, or the circuit board isn't sending power to it. Backlights can be replaced separately.

Posted on Sep 05, 2007

SOURCE: Black Screen/Viewfinder

Mine too! Thank you so much for posting this issue!!

Posted on Sep 07, 2007

  • 13 Answers

SOURCE: LCD screen black with white specs in picture and movie mode

With the power off, hold the camera in your palm and smack the front of the camera on your leg or arm. You might have to smack it a few time to get it to work. It has to do with the camera CDD lense (shuttle) being stuck. By smacking it around, it will free up the lense. Being extra gentle with it though. It worked for me. Hope this help.

Posted on Nov 11, 2007

t00nz
  • 4738 Answers

SOURCE: Blank LCD works but wont display

Know this is old, but additional cameras have been added to the lists since. Canon should fix these cameras for you for free, including free shipping both ways. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

Posted on Nov 15, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why a black screen on xps l701x w7 i7 1.73


Black screen - no flashing white cursor in the upper left corner - no picture at all, i.e. the initial Dell start-up screen doesn't show up either:
- LCD is dead or isn't getting a signal - not an easy fix; or
- the LCD isn't being sent a signal - holding down the function [Fn] key and press display Function key to toggle through its settings (LCD panel only, Rear VGA output only, both LCD and VGA output)

Black screen - flashing white cursor in the upper left corner - the screen goes black after the windows loading screens come up but before the windows login screen comes up - it is probably a windows video driver problem. Try starting in Windows Safe Mode with VGA. Press [F8] after the Dell startup screen disappears to access the windows startup menu

Oct 19, 2014 | Dell XPS Computers & Internet

1 Answer

I have an Emachine D620 5133 Laptop that the screen stays solid white when powered up, any ideas?


No ideas

Just definite facts

Problem is;
A) Graphics chipset
Or.
B) Video Cable
Or,
C) Screen Inverter
Or,
D) LCD screen

Diagnose
LOT of reading ahead.

1) Graphics chipset:

Connect a VGA monitor to the blue VGA port, on the right side of the laptop.

http://www.geeks.com/largePic_all.asp?invtid=D620-5133-OB&pic=D620-5133-OB-box.jpg

This is a general example of a VGA port (Connector), and VGA Cable,

http://en.wikipedia.org/wiki/VGA_Connector

You can use a CRT type of monitor (Looks like a small TV), or a flat LCD screen monitor if it has a VGA Cable.

Turn the monitor on. If a CRT type allow it to warm up
Turn the monitor on.
By factory default settings the display should show on the external monitor.
IF not;

There are at least 3 display options;
A) Internal monitor of laptop ONLY
B) Internal monitor of laptop AND external VGA monitor
C) External VGA monitor ONLY

Press, and hold down on the Fn key, and at the Same time tap once on the F5 key.
The F5 key is the Display Toggle-Over key.

Still no display on external VGA monitor?
Hold the Fn key down again, and tap once more on the F5 key.

No display, (Or solid white), on external VGA monitor, suggests problem with graphics chipset. If this is the problem post back in a Comment.

Good display?
Problem is Video Cable, or inside the Display Assembly.
(screen Inverter or LCD screen)

There are no eMachines D620 service manuals, available on the internet for free that I have seen. Supposedly a few paid for versions, but I have my reservations about that.
(Probably a Generic User Guide, which you can get for free)

I also have never worked on this model yet.

But this isn't rocket science, and this isn't 'my first rodeo'.

2) Video Cable:

The Video Cable plugs into the motherboard, in an area under the Keyboard, and under the Palm Rest Cover.

Judging by;
A) Top View of motherboard,

http://www.ebay.com/itm/eMachine-D620-Motherboard-48-4BC01-011-MBN240100-08226-1-Yukon-MB-/121076931939?pt=US_Motherboard_CPU_Combos&hash=item1c30bf5d63

Set your mouse cursor in the middle of the photo. This enables the Zoom In feature.

Looking at the rectangular metal plate, with the opening in the middle of it; come from the Top/Left corner.

See what appears to be a fairly long white strip?
That is where the Video Cable plugs into the motherboard.

Now here is the D620 with the Keyboard removed. (And Display Assembly),

http://www.ebay.com/itm/eMachines-D620-Motherboard-CPU-base-assembly-/110847874891?pt=Motherboards&hash=item19cf0c574b

Here you see the white connector again.
Middle, and towards the Top; in the small rectangular opening.

The Palm Rest Cover has to be removed, to access the Keyboard Cable's motherboard connector. This connector.

Going on....
The Video Cable then goes up by the left Hinge, and then up into the Display Assembly.
From there the main portion of the Video Cable, connects to the back of the LCD screen.
There is also a separate small cable, coming from the Video Cable; that connects to one side of the screen Inverter.

Example of the Video Cable,

http://www.ebay.com/itm/eMachines-D620-LCD-Video-Cable-50-4BC03-021-/130862506637?pt=US_Video_Cables_Adapters&hash=item1e7803628d

The white connector you see at the bottom, with the black pull strip; is the motherboard plug connector.
The small cable extending to the Right, connects to the screen Inverter.
The large connector shown at Top, connects to the back of the LCD screen.

Just from normal repeated opening, and closing of the laptop; the Video Cable may become pulled on, and/or pinched.
This can cause a loose connection at the motherboard side, or LCD screen side.
Screen Inverter cable connection may be pulled loose also

Can also cause damage to the Video Cable. Stretched/Broken wires

The procedure is to;
A) Remove ALL power. Remove the AC adapter (Charger), and Battery.

B) PHYSICALLY check to see if the motherboard connection is tight. Try to plug in tighter.
Reinstall power. Turn laptop on see if this was the problem.

No?
Remove all power again. This time remove the Display Bezel, and see if the Screen Inverter cable is connected tightly.
At this point it is just going to be a visual observation, and record.

Next is to check the LCD screen connection of the Video Cable, and it may loosen the Screen Inverter connection, anyway.

[The plastic frame in front of the LCD screen is the Display Bezel,

http://www.ebay.com/itm/eMachines-D620-LCD-Screen-Bezel-41-4BC01-001-/300798380595?pt=UK_Computing_Other_Computing_Networking&hash=item4608fb0a33 ]

If plugging the connections of the Video Cable in tighter, does no good; the Video Cable is then checked for continuity.
A multimeter is used, and set on OHM's. (1K)

Electricity is sent through each wire. The reading itself isn't as important, as just seeing IF there is a reading.
No reading indicates stretched/broken wire.
You can take the Video Cable, down to the nearest small computer repair shop; and have the resident tech check it out for a few bucks.

The Video Cable MUST be ruled out as the problem, before going on. Otherwise you may be buying parts needlessly.
(LCD screen? Around $70 to $100. You have seen the price of a Video Cable)

Video Cable proves to be good? Go on.

3) Screen Inverter:

The screen Inverter is located behind the Display Bezel, and mounted to the bottom of the LCD screen. (Screen Frame)

To test a screen Inverter requires a sensitive multimeter. Read fairly expensive,

http://www.fonerbooks.com/test.htm

Do to this, the ease of access to replace, and the general low cost; the screen Inverter is just replaced,

http://www.ebay.com/itm/LCD-Power-Inverter-Board-for-eMachines-D620-Backlight-Replacement-for-Screen-/120819595221?pt=US_Laptop_Screens_LCD_Panels&hash=item1c2168b7d5

If this doesn't repair the problem, the problem is the LCD screen.
Replace.

I can guide you, and I believe step by step; if you wish to attempt repair.
Post back in a Comment.

Regards,
joecoolvette

Mar 16, 2013 | eMachines eMD620-5133 Notebook

1 Answer

I have a HP DM4 Laptop and the LCD does not work, screen goes white, but the VGA Output works!!


Your problem must be residing with picture tube of monitor or the graphics processor

Jan 14, 2013 | HEWLETT-PACKARD Pavilion dm4-1265dx...

1 Answer

Display divided into 3 parts


LCD screen cracked, and Three even strips going across? Doubtful. Haven't seen it but I always have my mind open.

Three strips that are irregularly shaped? Look like glass that has cracked?
'Jagged edges'?

LCD screen is broken.

Three even strips indicates to me, that there may be a problem with the Video Cable. Then the screen Inverter is next in the diagnoses.
My money is on the Video Cable.

ALL power removed, Anti-Static Precautions FOLLOWED, I would check out the graphics chipset first.

1) Laptop OFF, monitor OFF, connect a VGA monitor to the VGA port on the laptop.
Left rear side. This is an example of a VGA Cable, and VGA connector. (VGA port on a laptop ),

http://en.wikipedia.org/wiki/VGA_connector

(Color of connector does Not matter. It is generally Blue, though)

You can use a CRT type of monitor, (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable.

2) Turn the monitor on. If a CRT type allow it to warm up.
Turn the laptop on.

There are at least 3 display options available;
1) Laptop internal monitor ONLY
2) Laptop internal monitor AND external VGA monitor
3) External VGA monitor ONLY

Press, and hold down on the Fn key, and at the same time tap once on the F5 key. (The F5 key is the Display Toggle-Over key)

No display on external VGA monitor?
Hold the Fn key down again, and tap once more on the F5 key.

Is the display on the external VGA monitor, the same as the internal monitor of the laptop?

Problem is the graphics chipset.

Display is fine on the external VGA monitor?
Problem is the Video Cable, screen Inverter, or LCD screen.

Video Cable:

A) http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/big/Toshiba-Satellite-A105-14.jpg

Switch Cover removed, Keyboard removed. Shows you where the Video Cable plugs into the motherboard.

B) http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/big/Toshiba-Satellite-A105-21.jpg

Palm Rest Cover you can see the white rectangular connector, for the motherboard side of the Video Cable, at the top left.
It's above the black cable, and near the screw hole.

The Video Cable leads from the motherboard, up through the left Hinge, and into the Display Assembly.
From there it connects to the screen Inverter, and back of the LCD screen.

http://www.ebay.com/itm/Toshiba-Satellite-A105-6017B0050801-LCD-Video-Cable-Genuine-OEM-Laptop-TESTED-/290754851160?forcev4exp=true&forceRpt=true

In the photo, (You can hover your mouse cursor on it to enlarge), the right side connector plugs into the back of the LCD screen.

The black connector to the far left connects to the motherboard.
The small white connector at the top with the Red, Green, Black, etc wires, connects to the screen Inverter.

(The small Black cable, that comes out from the black motherboard connector, is a Ground wire )

Due to the close proximity of the Video Cable to the left Hinge, it can be pulled on from just normal opening, and closing of the laptop over time.

This means the Video Cable connection on the motherboard side could be loose, or the LCD screen side, or both.

The diagnoses is to PHYSICALLY check BOTH connections. A loose connection at the motherboard, or at the back of the LCD screen could be so small in distance, that you will not see it with the human eye.

Could also result in damage to the Video Cable.
View the Video Cable with the Switch Cover removed, and see if there are any obvious signs of damage to the sheath of the cable.

If there is there could be damage to the tiny wires inside the Video Cable. (Stretched/Broken)

Use a multimeter set to OHMs, to check all wires inside the Video Cable for continuity, or have a 'Mom and Pop' computer store check it for a few bucks, or replace the Video Cable.

Video cable connections are tight? Video cable continuity check checks out OK?
Screen Inverter.

The test for a screen Inverter is to use a sensitive multimeter.
Read fairly expensive.

http://www.fonerbooks.com/test.htm

Not having access to a sensitive multimeter that you can use, means just replacing the screen Inverter. Seems like 'part changing', and it is, but you have to work with what you've got.

http://www.sparepartswarehouse.com/Toshiba,Satellite,A105,Laptop,Inverters.aspx

Find THE model number for your laptop, and the correct screen Inverter. A screen Inverter, and an LCD screen are a MATCHED unit.

Screen Inverter is checked out to be OK, or replaced, and symptoms are still the same, the problem is the LCD screen.

Remember, the first part of the diagnoses was to see if the divided parts were EVEN going across, or jagged and irregularly shaped.

Jagged in shape, and not even strips going across, means cracks in the LCD screen.
Replace.

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

[ Main article for A and B links above;

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-motherboard-1.htm ]

For additional questions please post in a Comment

Regards,
joecoolvette

Oct 22, 2012 | Toshiba Sattelite A105-S2051 Notebook

1 Answer

I have a 17inch star logic flat screen monitor and every time i turn it on the monitor will come on but then it will go black i have tried to shut it off and the same thing happens


Try to connect it externally to a laptop...

and also check the vga cable that is try to connect it first with vga port and then try with dmi port if you have...

Sep 19, 2010 | Star Logic 17" LCD Monitor

2 Answers

Gateway FPD1750 monitor's keep go black screen, no picture at al


tgordon60, If you know how those NEW "CURLIE-Q" energy efficient CFL light bulbs produce WHITE LIGHT, then you will know what makes an LCD display panel produce all the pretty colors and the WHITE BACKGROUND of the FIXYA web page!!! Only difference is that your "cold-cathode-fluorescent-lamps" are thinner and straight, and hung on rear of LCD glass panel and have a DC to AC electronic ballast called an "INVERTER" circuit to produce 600 to 1000vac to light them up. Get to my FIXYA profile and read my responses to other BLACK screen lcd owners to learn about all your options for repair. Follow any of the links to other web pages you find there. Your monitor not any different than ACER, DELL, VIEWSONIC, BENQ, SONY, AOC!!!!! 12fixlouie aka louie12fix

Dec 30, 2009 | Gateway Computers & Internet

2 Answers

Monitor stays white, cannot get picture


U might have problem with ur VGA cable. It may be loosely plugged. Plug it tight

Jun 24, 2009 | Westinghouse 19" Widescreen Flat Panel LCD...

1 Answer

Screen is white-- no menu no text nothing but backlight


IF THE WHITE SCREEN STAYS ON:
White screen indicates the signal from the video board inside your monitor is not getting to the screen.
You will have to take it apart to try to maybe fix it.
First thing you want to check is the connections from the video (VGA DVI) board to the back of the lcd panel. Bad connection here can cause your problem.
If the connections look clean and tight then you may have blown a fuse on the back of the lcd panel on the long circuit board. Usually the fuse is near the right side of where the ribbon connects and can be marked F1 or FB1. Checking this for DC voltage of about 5 volts may give you an answer.
bammbamm@ptd.net

Apr 04, 2009 | ViewSonic VX1962wm LCD Monitor

1 Answer

Picture shutting off


sounds like a cold solder. a connection that was soldered, wasn't properly. if it is still under warranty send back. if not then have repaired.

Sep 30, 2017 | Philips 26PF8946 26 in. HD-Ready LCD...

1 Answer

ViewSonic N1700w with Black stripe on right side of display


Sounds to me that you have a bad connection/wire to the CCFL bulb on that side of the display. Should be an easy fix, do it your selfer thing.

Dec 27, 2007 | ViewSonic NextVision N1700w (Black,...

Not finding what you are looking for?
Cameras Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Brad Brown

Level 3 Expert

17446 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...