Question about Kenmore 63942 Dryer
When dryer is on it makes a loud noise, but is still drying the clothes.
Check rollers and idler besure and watch how you remove belt its tricky
Posted on Jul 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Solution for the Maytag model is most likely to replace the blower wheel. Remove the two screws on the front panel (just a couple inches off the floor) and swing the front panel up to allow you to unhook the top side of the panel from the clips at the very top of the front panel. You do not have to remove the wires, just set the front panel to the side. Blower wheel is at the lower left. The old wheel most likely no longer has a D shaped hole to match the motor shaft, and spins freely. Remove cover. Replace the wheel part number Y303836 for a LDG7304AAE which is held on the shaft with a spring type clamp. Reassemble. Not really very hard to do. On a difficulty scale or 1 - 10, I'd rate it a 3.
Posted on Dec 06, 2008
Take off the back panel of the dryer and look at the motor and belt turning the drum. There may be something caught on the drum and is pinned in place causing the noise. The motor could be loose on the platform and needs to be tightened. It is probably something physical and seen causing the noise.
Posted on Jan 14, 2009
Tips for a great answer:
Jan 09, 2013 | GE 5.8 Cu. Ft. Extra-Large Capacity Gas...
Nov 07, 2010 | Kenmore 65924 Electric Dryer
May 14, 2010 | Maytag Neptune MDG5500AW Gas Dryer
Sep 09, 2009 | GE Dryers
Jun 03, 2009 | Frigidaire Electric Dryer
Jan 04, 2009 | Whirlpool LER4634J Electric Dryer
258 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: