Question about Kyocera Copystar CS-1820 Black and White Copier

1 Answer

It wont execute when i try to press enter on the "execute" menu..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 622 Answers

If you are in a service mode then you need to actually turn the copier on and off to finish the function... it executes but power it down and then up confirms and actually makes it happen

Posted on Dec 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you do a factory reset on roland xp80


Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6 (EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, then press F6 (EXECUTE)
Guide: https://www.rolandus.com/assets/press_media_resources/Factory_Reset.pdf

May 02, 2014 | Roland FANTOMG8

1 Answer

Clear/stop 1, 0, 7 color start does not work


Each menu is classified into two "Modes" depending on how you enter the service menus.

"Menu Mode" can be executed by pushing a sequence of keys.

"Special Mode" can be executed if you press certain keys at the same time as you turn the power on.

Each menu is classified as follows:
Menu Mode
Maintenance Mode Menu This is a menu for maintenance and service.

Special Mode
Fax Service Test Menu This is a menu for checking the fax mode.

MAINTENANCE MODE MENU

Selecting an Item

To select an item, press the "Up" or "Down" key.


Going into the Next Level/ Returning to the Previous Level

To go into the next level of an item, select an item then press the "OK" key.

To return to the previous level of an item, press the "Return" key.


Exiting the Maintenance Mode Menu

To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the

"Ready" display appears.

For clear SC 543 Enter the engine maintenance mode.

Press "O.K" in "Fuser SC Reset" with engine maintenance mode, and then turn the main power switch off and on.

Oct 08, 2013 | Ricoh Aficio SPC232SF All-In-One Laser...

1 Answer

An Axxess Executive Digital Terminal: One of our


I am going to include a link to the administrator guide for you to download (its in pdf format). However here is what I found in the admin guide:

To change a password:
1. Access the voice mail administrator's mailbox and menu (see page 53).
2. Say "Mailbox Maintenance" or press to access the Mailbox/Group List Maintenance
option.
3. Say or enter the mailbox or extension ID to be accessed. You hear the Personal Options
Menu.
4. Say "Password" or press .
5. If you want a password, enter a new password using digits 0-9 (up to 12 digits) and
press when you are done.Voice mail plays back the password.
If you do not want to use a password, say "Skip" or press . Voice mail announces
that you have chosen not to have a password.
6. Say "Accept" or press to accept the password as entered, or say "Re-enter" or press
to erase and re-enter the password.
7. Hang up or press to return to the previous menu.

If this is not the right section then maybe one of these admin guides will help:

http://www.cmscomm.com/guides/axxesssAdministrator.pdf

http://pointz.com/pdfs/Axxess710AdminGuide.pdf

Hope it all goes well for you

Jul 22, 2011 | Inter-Tel Intertel Axxess Executive Phone,...

1 Answer

I can't login via telnet on my SRW2008 Instead of the normal sreen (with only User Name/Paswoord) I get this menu and when I give User/Password and press Enter it just toggles between User en Password...


The 'TAB' key on your keyboard should move the cursor from one field to the next. On the 'Edit/Execute' field, press the 'SPACEBAR' key to rotate through all the options within a field, e.g., "yes" or "no", and press the 'ENTER' key to select from one of the options. In the 'ID' or 'PASSWORD' field, press 'ENTER' to move on to the next screen.

Dec 23, 2010 | Linksys SRW2008

1 Answer

T8008 printer with message says "replace fuser"


The 'Replace Fuser' message on the 8008 can be cleared in the following way;
• Power the printer Off
• Hold down FORM FEED and ENTER and power the printer on

Keep the FORM FEED and ENTER keys held down until the printer displays SERVICE MENU - INFORMATION

• Press the RIGHT ARROW to MAINTENANCE, and press ENTER
• The Display should read MAINTENANCE - CLEAR FUSER, if it does not press the right arrow until it does and then press MENU/ENTER
• The Display Should now Read CLEAR FUSER NOT EXECUTE, Press the right arrow until the display reads CLEAR FUSER EXECUTE
• Press ENTER, and after a pause the display should read COMPLETED CLEAR FUSER
• Power the printer off and after about 10-15 seconds power the printer back on again.

The message should now be cleared

Jan 12, 2009 | TallyGenicom 8008 Laser Printer

1 Answer

Copystar cs1815 c6000 code


This is a fuser problem -- here is a reset method:


First open top cover then turn on power.
press system menu/counter
arrow down to service
press and hold start, # then enter keys
arrow down to maintenance
press enter
arrow down to Sim 163
press enter
select execute
press enter
turn off power then back on

Aug 18, 2008 | Copystar CS-1815 Printer

2 Answers

Error C6000


This is a fuser problem. Try this to reset:

First open top cover then turn on power.
press system menu/counter
arrow down to service
press and hold start, # then enter keys
arrow down to maintenance
press enter
arrow down to Sim 163
press enter
select execute
press enter
turn off power then back on

Jul 28, 2008 | Copystar CS-1815 Printer

1 Answer

Error sc548 on a ricoh 1027 just did maintenance must of turn on before fuser installed , how can i reset?


Enter SP 5810 (SC code reset), select “Execute”, select “close”, exit SP mode then turn main power switch off and on.
to enter SP mode press yellow C button press 1 0 7 on numeric keypad and then hold down the orange C button from the menu select copier SP then type in 5801 and press # selest execute then power off and back on. Your machine should now be working

Jun 17, 2008 | Office Equipment & Supplies

1 Answer

Tally T8106


To reset page counter after replacing the OPC belt or FC Roller please follow the steps below:
  • Power the printer on while holding down MENU/ENTER key
  • Release the key when the display shows "Utility Menu Clear FC. Roll"
  • If you have replaced the FC Roller then select this option by pressing MENU/ENTER key, if you have replaced the OPC belt then change this option by pressing MEDIA key so the display changes to "Utility Menu Clear Belt CG".
  • When one of these options is selected by pressing MENU/ENTER key, the display will change to "Utility Menu Clear FC. Roll/ Clear Belt CG Not Execute" by pressing MENU/ENTER key again the display will change to "Execute"
  • Press the MENU/ENTER key again after 10 seconds the display will change to "Completed Clear FC. Roll / belt CG"
  • Now power the printer off and after waiting few seconds power it on again, after it's initial self-diagnosis the printer should now work normally without the error message.

Jan 28, 2008 | Tally T8106 Laser Printer

2 Answers

Error Message ('replace belt CG')


To reset page counter after replacing the OPC belt or FC Roller please follow the steps below:
  1. Power the printer on while holding down MENU/ENTER key
  2. Release the key when the display shows "Utility Menu Clear FC Roll"
  3. If you have replaced the FC Roller then select this option by pressing MENU/ENTER key. If you have replaced the OPC belt then change this option by pressing MEDIA key so the display changes to "Utility Menu Clear Belt CG".
  4. When one of these options is selected Press the MENU/ENTER key and the display will change to "Utility Menu Clear FC. Roll/ Clear Belt CG Not Execute". Press the MEDIA key and the display will change to "Execute"
  5. Press the MENU/ENTER key and after about 10 seconds the display will change to "Completed Clear FC. Roll / Belt CG"
  6. Now power the printer off and after waiting few seconds power it on again, after it's initial self-diagnosis the printer should now work normally without the error message.

Jul 12, 2007 | Tally T8006 Laser Printer

Not finding what you are looking for?
Kyocera Copystar CS-1820 Black and White Copier Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Henry Gertcher

Level 2 Expert

48 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...