Question about Westell Wirespeed LiteLine 6110 Modem

Open Question

Remote Desktop setup with Westel 6100 - Westell Wirespeed LiteLine 6110 Modem

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

frcs68
  • 1605 Answers

SOURCE: westel 327 modem setup

it is toon complicated to explain how every thing should go together and how th moderm should be setup. IP address and the cryption for the wirless.
I am go ing send you the website with the quick setup guide.
if you need step-by-step instruction let me know, i will try my best to describe it to you.
let me know if you have other question that you need answer.

frcs68@hotmail.com

Posted on Oct 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my casio CE-6100. I brought it second hand and need to clear it before I can use it.


If you do that, you will need to setup the dealer (system) programming such as keyboard allocation, machine features and memory allocation. You could just edit the programming to suit your business and save a lot of time. print the Z1 and Z2 reports to clear the totals (the grand total can't be reset but you don't need it if you do daily reports anyway).
If you need any manuals,
Casio CE-6100 operation manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_CE-6100_users_manual.html
Casio CE-6100 dealer programming manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-6000_TK-6500_TK-7000_TK-7500_TK-T500_CE-6000_etc_dealer_manual.html

Sep 01, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

I have a Westel wirespeed. Can I hook up a


The Valet Plus manual shows rear connections for 4 wired computers (like most routers), so you would plug your work computer into one of those. The yellow Internet port on the back of the Valet would connect to the modem's Ethernet jack (also yellow, I believe; that's the standard color coding). If you need full setup information you can download the manual and get other answers at Cisco's site.

Apr 11, 2010 | Westell Wirespeed LiteLine 6110 Modem

1 Answer

Possible to connect a laptop using ME w/ a zyxel modem to a Westel 327W router to a dsl server?


Yes it is possible. So long as you know how to configure your Westel router to connect to the modem.

Jan 01, 2010 | Computers & Internet

2 Answers

Installation instructions for 6100 to laptop required


Here is the Setup Sheet:

Lexmark 6100 Series Setup

And...the User Guide:

6100 Series User Guide

Here is the link to download drivers if needed:

6100 Support

Click on the Downloads tab. Select the correct one for your Opeating System.

Sep 08, 2009 | HP Pavilion Media Center a1330n - AMD...

1 Answer

How to reset the default value for the toshiba sd 6100 dvd player


If you want HDMI 'Auto' mode (the factory default), you need a combination of selecting the proper output mode (use the remote's 'Progressive' button to toggle between the four output modes: HDMI, RCA VGA, component video out and s-video. Once you're in HDMI mode (the led's on the front of the box are a dead give-away!), then you can press the front panel 'HDMI Select' button to move through the five available HDMI settings: 480P, 720P, 1080i, 1080P and 'Auto'. You're in 'Auto' mode when all four led's are lit.

Jan 25, 2009 | Toshiba SD6100 DVD Player

1 Answer

Westel 327 modem setup


it is toon complicated to explain how every thing should go together and how th moderm should be setup. IP address and the cryption for the wirless.
I am go ing send you the website with the quick setup guide.
if you need step-by-step instruction let me know, i will try my best to describe it to you.
let me know if you have other question that you need answer.

frcs68@hotmail.com

Oct 20, 2008 | Westell Wirespeed LiteLine 6100...

1 Answer

Westel 6100F


Ted, If you have checked all of your filters one by one and they are ok, I had the same problem. I even ran what they call a Home Run wire which is a direct line from your modem to the outside box and that did not work. After talking to numerous Techs. I was told it was the modem itself, if yours is less than a year old they should send you another one. I purchased a new one at Walmart for $69 that has that has a router built into it for my wireless laptop. It has the Verizon logo on the box and within ten minutes I was connected and havn't had the problem since.
Good Luck, Bob L.

Oct 11, 2008 | Westell Wirespeed LiteLine 6100...

2 Answers

Cannot connect using westel 327 from verizion --lights blinking(dsl)


If they are charging you for the use of the westel, just tell them you don't need it. I would keep using your other modem that works.

Jan 28, 2008 | Westell Wirespeed VersaLink...

1 Answer

Problems with home networking between desktop running XP (wired) and laptop running Vista (wireless), using DSL broadband (PPPoE) internet connection, Westell 6100 modem/router & Linksys Wireless-G WR


Hi MissGarbs,

Based on your post and description, it would seem that your problem is caused by:
1. having 2 routers on the same system;
2. Both routers performs DHCP server function; and
3. Both routers use 192.168.1.1 as default IP Add.

Your problems are:
a. laptop has no internet access only local network; and
b. you cannot access the router to make changes.

A possible solution. Pls back up your configurations first before attempting changes (or log them down somewhere so if needed you can revert back).

A. Power off and remove all connections to the LinkSys WRT54GS, set it aside for the moment. The objective is to verify/establish Internet connection.

Connect your desktop PC via LAN cable to the Westell 6100. Boot your desktop PC, right click on the networking icon bottom right side in your system tray, click on Status, click on Properties button, highlight Internet Protocol (TCP/IP), click on properties button (mid right):
tick "Use the following IP address"
Enter values as shown below -
IP address: 192.168.1.4
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS servers: 68.238.0.12 & 68.238.112.12
click on OK, OK, Close.

Power on the Westell 6100, give it time to sync and connect to your Verison. .In the desktop PC, open a browser. Verify that your desktop have access to the Internet, do it on a few sites. Should you have no internet access, pls seek assistance from Verizon tech support. You need not mention the LinkSys nor the laptop since you have as of the moment a single PC attached directly to the Westell 6100.

If it is all green & go, power up your laptop and boot to Windows. Remove the LAN cable at the back of your desktop and connect it to the laptop's networking port. Do the same configuration ("Use the following IP address") to the networking/LAN card of your laptop.
Enter values as shown below -
IP address: 192.168.1.5
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS servers: 68.238.0.12 & 68.238.112.12

In the laptop open a browser. Verify that your laptop have access to the Internet, do it on a few sites. Should you have no internet access, pls seek assistance from Verizon tech support again. You need not mention the LinkSys nor the desktop since you have as of the moment a single laptop attached directly to the Westell 6100. (This is of course assuming that your laptop has a networking port)

If both the desktop PC and the laptop can now connect albeit individually to the Internet, the LinkSys may now be inserted into the system.

B. Disconnect the LAN connection of the laptop to the Westel 6100 and connect it to one of the 4 LAN ports at the rear of the WRT54GS; do the same with the desktop (use another LAN cable). The LinkSys for the moment need not be connected to the Westell. So in effect you have 2 units connected to the WRT54GS. Do a hard reset on the WRT54GS, with the power on, press on the small reset button at the rear of the unit. Allow it to reinitialize. Open browsers to both laptop and desktop. Type "192.168.1.1", password is "admin" and the username is blank, verify that you can open the LinkSys Web Configuration Utility. On either the laptop or the PC desktop (assuming both can access the same page), on the setup page of the LinkSys Config, change your Internet Connection Type to "Static IP",
Internet IP Address 192.168.1.2
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS servers: 68.238.0.12 & 68.238.112.12

Scroll down to Network Setup,
Change IP Address to 192.168.1.3
Subnet mask: 255.255.255.0
Disable the DHCP Server (You can have at any given time only 1 instance of a DHCP server, either from the LinkSys or the Westell, but you can also have NO DHCP server if you are using static addresses.)

Click on Save Settings at the bottom, exit, and close. Verify that the LinkSys can be accessed from any of your browsers by typing "192.168.1.3", if no; go through the procedure again very carefully. If yes, proceed to change the Default Gateway of both the laptop and desktop PC from 192.168.1.1 to 192.168.1.3, all other configurations stand.

In your laptop, right click on the WiFi networking icon (bottom right of System Tray). Click on Status, click on Properties button, highlight Internet Protocol (TCP/IP), click on properties button (mid right):
tick "Use the following IP address"
Enter values as shown below -
IP address: 192.168.1.6
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.3
DNS servers: 68.238.0.12 & 68.238.112.12
click on OK, OK, Close.

Verify that you can access/connect/ping 192.168.3; 192.168.4; 192.168.1.5; and/or 192.168.1.6 from either the laptop or desktop.

If yes, we can now connect the LinkSys WRT54GS to the Westell 6100. Remove the LAN cable attached to your laptop. Verify that you can still access/connect/ping 192.168.3; 192.168.4; 192.168.1.5; and/or 192.168.1.6 from the laptop even without the LAN cable since you are now connected via WiFi.

If yes, connect that LAN cable to the Westell 6100 LAN port, move the other end from 1 of the WRT54GS ‘ 4 LAN ports to the WAN likewise at the rear of the LinkSys.

Verify that you can access the Internet from either computer. At this moment, you have not assigned a security method (WEP, WPA, MAC Filter). Your choice as to what security you want implemented but offhand I would suggest the simplest, MAC Filter since any other would affect speed of your connection.

Additionally, you may want to enhance you browser connection. In Mozilla, click on Tools, Options, Advanced tab, Network tab, Settings button, tick "Auto-detect proxy settings for this connection, OK, OK;
In IE, Tools, Internet Options, Connections tab, LAN settings button, check "Automatically detect settings", OK, Advance tab, check Use HTTP 1.1 through proxy connections.
In Opera, Tools, Preferences, Advanced tab, Network, Proxy server buttons, check "Enable HTTP 1.1 for proxy, OK, OK.

Normally (and perhaps easier for some) would be using the DHCP and not using static. Experience has shown me that static proves to be more stable especially if WiFi is concerned and in your case, only 2 PCs.

Hope this be of some help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Nov 05, 2007 | Linksys Wireless-G WRT54GS Router...

2 Answers

Mutlitple "Server not found" responses before URL connects


I have had this happen to me a couple of times with verizon dsl
and it is aways an out side the house wiring problem. call verizon
to send a repair man. They have never charged me for this.

Oct 21, 2007 | Westell Wirespeed LiteLine 6100...

Not finding what you are looking for?
Westell Wirespeed LiteLine 6110 Modem Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

arnold balmaceda
arnold balmaceda

Level 1 Expert

13 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...