It just stop woring - Nikon Coolpix L110 Digital Camera

Is the stopping button wore out. If so you can get a new one. Maybe it just goes in too easy.

Sounds like the motor is wore out! Or maybe the belt if its belt driven

Try pushing on the door, to see if the stopping/restarting stops, I am guessing your door switch may be wore a bit, and maybe out of adjustment when closing. sometimes the mounting hardware slips out of place, and the door switch in not engaging enough to stay on.

Sounds like the blower motor either wore out, or the relay is bad for it.

Good luck on this repair.

is the drum spinning easy ?with no metal to metal grinding sound ? could be the start run capacitor for the motor its black/ round and is on the side of motor //or the motor windings have overheated 2 manny times an swelled the windings ///the drum shaft sleave/bearing could be wore out or gone //the front drum slides could be wore out or gone //kinda need a little more info.. hope this helps.. let me know., an good luck

look for a tension knob it will tighten the belt unless the belt is really wore out and may need replaced

If it is electrical,the blower motor is wore out and has no life left in it,no repairable part,when blower is moving the heat from bad motor is swelling and when cool will turn free. Please rate.jj505

Check your wall button is the lock turn on?

The front drum support has wore out. Reach your hand in the tub and puch up on it. If it moves up and down a lot the support is wore. Buy a new support and front slides and it will stop squeeling.

flasher,relay or the switch itself