Question about Canon imageRUNNER 400S Copier

2 Answers

Canon ImageRunner 400S - Clear RIP job

I have a job that has been sent to an ImageRunner 400S that has been hanging out in RIP status for several days now.  I have tried clearing the memory, rebooting the printer, clearing the print job from the server, all of which are unsuccessful.  Is there any way to clear this?  This has happened once before, and the technician who fixed it for me is no longer with the company, and the new technician can't figure it out.

Posted by on


2 Answers

I think I can help but its been a long time . you need the clear the print jobs at the PC first then the print serveron the copier. turn the copier off and on, as it starts to warm up press the print button, now when it ask if you want to start setup press yes...scrool around till you see clear print server and say yes reboot.
good luck

Posted on Dec 23, 2007

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

So I have done these things as well to my IR 600 but it still ready that it is busy and it is still stuck on the 485K RIP. Is there anything else I can try???

Posted on Jul 22, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My Canon copier, Model IR 400s, Shows the error code : E 604. What is the problem ? How can I Solve it ?

Problem :
E604 Error Code. You followed all the troubleshooting steps in the service manual and still have an E604 code.

Solution :
Check the Image Server Memory or the Image Processor PCB. The recommended Image Sever Memory should be Kingston 32MB, 144 pin EDO Module, 64 Bit, 60 nanoseconds, No Parity.

Jul 13, 2012 | Canon imageRUNNER 400S Copier

1 Answer

Error : Hard disk full How to free memory in hard drive of IMAGE RUNNER 400S machine


power on the copier, press the 3rd function key of panel board (lick. PRINT or OPTION/IF)

panel display go to printer mode ........ WAIT....

then ......... GO TO SET -UP YES or NO press NO

then ........automatically re boot the system

then.........display PRINT PAGES

now.......conficration data senting to print that time display CANCEL JOB, RIP, INFO etc.,

press the CANCEL JOB then YES

now .. old data automatically ereased.

then copier OFF / ON

best of luck.

Feb 26, 2011 | Canon imageRUNNER 400S Copier

1 Answer

Ir 400 copier hangs after every 4 to 5 prints

try this; switch on the machine, press *(additional function) then 2 and 8 together and again * then on screen select- copier>function> clear and clear one by one iteam by selecting it and pressing OK.then switch off the machine and restart. this should fix your problem.

Jan 24, 2011 | Canon imageRUNNER 400S Copier

1 Answer

Setting up department ID's on Canon ImageRunner 400s

Pages 4-16 thru 4-24 of the Reference and Copying Manual cover this topic. I have the User Guides downloaded...but can't provide a link to them.

Jul 08, 2009 | Canon imageRUNNER 400S Copier

1 Answer

Making a Canon Imagerunner 400S a network printer

connect network cable from the machine to the switch or router, and give ur machine ip address compitable with ur network, then load the driver on ur computer and u will be fine.

I’m happy to help further over the phone at

Jul 06, 2009 | Canon imageRUNNER 400S Copier

1 Answer

Canon c3220: delete print job from memory

go into system monitor on the main screen and click on the print jobs recieve and clear them,
Canon Technician

Mar 05, 2009 | Canon imageRUNNER C3200 Copier

2 Answers

How to do rip and hold for 1r400

Command Workstation Use For Xerox Not For Canon. OK

Dec 12, 2008 | Canon imageRUNNER 400S Copier

2 Answers


press the additional * 2+8 additional *

select the copier on the screen
select function
select clear
select ERR
press OK
restart the Copier

Oct 02, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Canon imageRUNNER 400S Copier Logo

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2179 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides