Question about IBM ThinkPad T40 2373 Notebook

1 Answer

I have an Ibm think pad laptop and I went to turn it on the other day and the ibm screen comes up with press F12 for bios set up on bottom but dosent go pass this screen no cursur and no sound got any ideas?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Use IBM boot disc that was supplied with your computer. If that doesnt work use the operating system disc that came with it. If you have neither of those and the operating system was installed from the factory on a different sector of your hard drive try to start the computer up 3 times in a row and the computer should say safe boot or even boot from diagnostics etc. If you dont see any of that at all possible hard drive failure occured and you will be looking at gettting a new hard drive $50-$150 depending on size (newegg.com). Do you have the operating disc or not? if you dont then you will need to call IBM to see if they can send you a disc, if thats a no go then you will need to purchase one (newegg.com).

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IBM Thinkpad T30 2366 won't boot after the IBM Thinkpad screen


you can go to the BIOS setting? if you can,look for "Boot Device Priority" or something like that,it's usually placed on Advanced settings. Set the first boot device as your harddisk,save the settings and restart your computer
Please let me know if it's working or not

Aug 28, 2012 | IBM ThinkPad T30 2366 Notebook

1 Answer

Laptop not used for some years. could enter bios OK to reset Replaced U/S CMOS battery with no problem. Restarted............ Message press F1 ibm bios setup press F11 to invoke IBM product recovery...


I received an IBM laptop with same issue a few months back. The error message due to the drained out CMOS RTC (coin-cell battery), which retains and other BIOS settings.
The system is OK and all you have to do is to get the CMOS/RTC battery replaced by the a professional.
Good Luck!
CreativeTECH

Dec 31, 2010 | IBM ThinkPad R30 2656 Notebook

1 Answer

I turn it off and the next day the screen was black but the computer was on how do i reboot it.Its a IBM think pad R52


Your computer unable to save BIOS setting because of damage of your BIOS battery,So please replace the battery with new one.

Aug 24, 2010 | IBM ThinkPad R52 Notebook

1 Answer

What is the problem when uyou switch on the IBM


You probably need to replace the BIOS battery. This battery is small and on the inside of the laptop connected to the motherboard. It stores the BIOS settings, date and time. If this battery becomes worn out then it will cause your issue. First try and press F1. Navigate to the last tab and select to restore defaults, then save and exit. If the computer boots up fine but the next time you use it the same message appears then you need a new BIOS battery. Alternatively your HDD may be damaged if it cannot find a boot device. Check your HDD is recognised on the boot menu by pressing F12, select it and press enter and your OS should boot. Hope this helps,
www.PuterCare.com

Jul 23, 2010 | IBM ThinkPad T20 2647 Notebook

1 Answer

How can i unlock a ibm think pad? when you turn it on it only gives you 2 choices.It says f1 to set up bios utility or f12 to connect with another devise.


try the f12 key and then when boot option opens click on boot from hard drive then save and exit . then you should be good .

Jul 03, 2010 | IBM ThinkPad T30 2366 Notebook

1 Answer

What is logon chriteria


hit F2 or DEL or F12 at single time wait for screen show press --X--- key to enter bios

Jun 20, 2010 | IBM (09N5424) Motherboard

1 Answer

Can't get the IBM Think Pad 600E to start.


You need to get into the BIOS setup.

Turn off power to the computer. Wait about 30 seconds. Hold down the F1 key while you turn
on power and keep holding down that key until the setup screen comes up. Go to the network boot section and disable Network Boot. Save setting and restart. That should fix it.

Mar 15, 2009 | IBM Computers & Internet

2 Answers

IBM ThinkPad R50 restore factory settings


You might have deleted the Hidden partition within the drive .So you will not get the restore factory setting option

Dec 13, 2008 | IBM ThinkPad R50e Notebook

4 Answers

How to go to boot settings in IBM 6578-PBU machine


Try each of the following: F1 F2 ESC DEL F10

Aug 26, 2007 | IBM NetVista A40 PC Desktop

Not finding what you are looking for?
IBM ThinkPad T40 2373 Notebook Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...